User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
6 Conference
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
Parameter
Description
Setting
at your site.

If you select Auto, Video
resolution is available.

If you do not select Auto, you
must also set Video resolution
and Video frame rate.
Video
resolution
Specifies the video format. The
available options vary depending
on your settings of Video
protocol.
When Video protocol is set to
Auto, set this parameter to either
of the following:

Smooth: Your TE30 uses a
high frame rate to ensure
smooth video.

Sharp: Your TE30 uses a high
video resolution to ensure clear
video.
The default value is Auto.
Video frame
rate
Specifies the frame rate used
during video encoding.
Video is smoother at a higher
refresh rate. Video at a lower
frame rate is clearer.
The default value is Auto.
It is recommended that you retain
the default value.
Video
resolution
Specifies the video resolution.

Smooth: Your TE30 uses a
high frame rate to ensure
smooth video.

Sharp: Your TE30 uses a high
video resolution to ensure clear
video.
The default value is Smooth.
Prevent little
packet loss
Specifies whether to prevent little
packet loss to avoid artifacts.
This parameter is deselected by
default.
If the participant endpoints are on
the same private network, select
this parameter.
Enable H.239
Specifies whether you can share
presentations during conferences.
NOTE
You can set H.239 video protocol, ,
H.239 video bandwidth typeH.239
video resolutionH.239 video
bandwidth(%)Presentation
plug-and-share.
This parameter is selected by
default.
H.239 video
protocol
Specifies the video protocol your
TE30 uses to encode presentations.
The default value is Auto.