User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
5 Microphone and Speaker
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
Step 2 Touch and hold the button in the center of the VPM220 top surface for 5 seconds.
A confirmation dialog box is displayed.
Step 3 Select Confirm.
The VPM220W sets up a WPS connection with the TE30 and attempts to obtain an IP address.
After the VPM220W obtains an IP address, its indicator is steady blue.
----End
The status indicators can quickly provide information about the VPM220W working status.
Table 5-3 describe the status indicator.
Table 5-3 Indicator status
Indicator Status
VPM220W Status
Microphone indicators all red
Microphones in all the three directions are
muted and working correctly (not in sleep
mode).
Microphone indicators all blue
Microphones in all the three directions are
unmuted and working correctly (not in sleep
mode).
Microphone indicators off
The VPM220 is in sleep mode or powered
off.
Microphone indicators blinking blue in turn
clockwise
The VPM210W starts properly and is
obtaining an IP address.
The VPM220W is reconnecting to the
TE30.
Microphone indicators blinking blue at the
same time
The VPM210W is being upgraded.
Wi-Fi indicator steady red
The Wi-Fi connection is faulty or Wi-FI
signal is weak.
Wi-Fi indicator blinking red
The VPM220W cannot connect to the TE30
over Wi-Fi.
Battery level indicator off
The battery level is normal.
Battery level indicator red
The battery level is lower than 3.65 V.
Battery level indicator blinking red
The battery level is lower than 3.4 V.
Charging status indicator blinking blue
slowly
The VPM220W is being charged.
Charging status indicator steady blue
Charging is complete.
Charging status indicator off
The VPM220W is not placed on the charger
dock.