User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
4 Display and Camera
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
Parameter
Description
Setting
presentation and video.

2 panes: The presentation and video are
displayed in two panes.

3 panes (a) or 3 panes (b): The
presentation and video are displayed in
three panes.
Small window
position
Specifies the position of the PiP window
on the screen.
This parameter is available only when
Automatic layout mode is set to PiP.
NOTE
Only the main output port supports this
parameter.
The default value is
Lower right corner.
Step 4 Select Save.
----End
4.2 Configuring Video Input
Correct video input settings enable your TE30 to properly display video input from the
built-in camera and VGA IN port.
Background
Your TE30 has a built-in camera and cannot be connected to external cameras.
Your TE30 also provides a VGA IN port, which can be connected to a VGA port of a
computer.
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Video Input. Set the video input
parameters by referring to Table 4-5.
Table 4-5 Video input parameters
Parameter
Description
Setting
Name
Specifies the video input port name to
help you identify ports during a
conference.
This name contains 1-64
characters.
Initial
position
Specifies the position of the built-in
camera when you power on the TE30.

Auto: The camera moves to its initial
position after startup.

Preset 1: The camera moves to the
The default value is Auto.