User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
About This Document
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
About This Document
Overview
This document describes how to install, configure, maintain, and troubleshoot the HUAWEI
TE30 Videoconferencing Endpoint (TE30 or endpoint for short). It also includes step-by-step
instructions for conferencing tasks.
When using this document, note the following:

Except chapters 11 Web-based Remote Management, 12 Troubleshooting, and 13
Maintenance, which apply to the endpoint web interface, descriptions and configuration
in this document apply to the endpoint's user interface controlled by the remote control
(remote controlled UI for short).

To access the menu screen, press on the remote control. You can find the option bar
on the left of the menu screen. This option bar is your interface to all functions except
calling.

To move up, move down, hide, or show an icon in the option bar, select and then
the desired icon.

To hide the option bar, press the left arrow key, , or on the remote control.

To show the option bar again, press on the remote control.
Intended Audience
This document is primarily intended for:

Administrator
The administrator has access to all menus on the web interface and remote controlled UI.
When Advanced Settings is password-protected, the administrator must enter the
password for access. For details about how to set the password, see 10.2.1 Setting the
Administrator Password.

Common user
Common users have access to all menus except Advanced Settings on the web interface
and remote controlled UI.
Symbol Conventions
The symbols that may be found in this document are defined as follows.