User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
Parameter
Description
Setting
If you set Encryption mode to
NONE, the Wi-Fi network
provided by your TE30 is open
to everyone.
Local IP
address
Subnet mask
Specifies the IP address and subnet mask
of your TE30.
Examples:

Local IP address:
192.168.1.10

Subnet mask:
255.255.255.0
DHCP
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
If you select this parameter, you must
also set Start IP address and End IP
address.
This parameter is deselected by
default.
Start IP
address
End IP
address
Specifies the IP address segment for the
devices connected to your TE30.
Examples:

Start IP address:
192.168.1.10

End IP address:
192.168.1.157
Step 3 Select Save.
Under Connected devices, you can view the MAC and IP addresses of all devices connected
to your TE30.
----End
3.5 Setting QoS Parameters
The quality of service (QoS) settings determine the mode for processing IP data packets in a
conference.
Procedure
Step 1 Choose Advanced Settings > Settings > Security > QoS. Set the QoS parameters by
referring to Table 3-5.
Table 3-5 QoS parameters
Parameter
Description
Setting
QoS type
Specifies the QoS type. Available values
are Priority and DiffServ.

Priority: If you select this option,
you must also set IP priority and
Service type.
The default value is Priority.