User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
Table 3-4 Advanced wireless network parameters
Parameter
Description
Setting
SSID
Number
Specifies the name for your endpoint's
Wi-Fi network.
This parameter is mandatory.
The value is a string of 31
characters or less, consisting of
digits, letters, Chinese
characters, and special
symbols, such as @ # %.
Channel
Specifies the channel to transmit data
through Wi-Fi signals.
If you select AUTO, your TE30
automatically selects the optimal
channel.
The default value is AUTO.
Retain the default value.
Protocol
Specifies the standard used on the Wi-Fi
network.

802.11b: This standard works in the
2.4 GHz band and delivers a
maximum transmission rate of 300
Mbit/s.

802.11g: This standard works in the
2.4 GHz band and delivers a
maximum transmission rate of 54
Mbit/s.

802.11n: This standard works in the
2.4 GHz band and delivers a
maximum transmission rate of 300
Mbit/s.

802.11b/g/n: The 802.11b, 802.11g,
and 802.11n are all supported.
The default value is
802.11b/g/n.
Identity
authenticatio
n mode
Encryption
mode
Specifies the identity authentication
mode used on the Wi-Fi network.

OPEN: If you select this option, the
value available for Encryption mode
are NONE and WEP.

SHARE: If you select this option, the
values available for Encryption
mode is WEP.

WPA-PSK: If you select this option,
the values available for Encryption
mode are TKIP and AES.

WPA2-PSK: If you select this
option, the values available for
Encryption mode are TKIP and
AES.
Default values:

The default value of
Identity authentication
mode is OPEN.

The default value of
Encryption mode is
NONE.
NOTE
When the TE30 is connected to a
VPM220, you must set Identity
authentication mode to
WPA-PSK or WPA2-PSK.
Password
Specifies the password used by other
devices to connect to your TE30.
The required password types
vary depending on your
settings of Encryption mode.