User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
When the TE30
Is...
OLED Display Shows...
correctly
Being updated

Message "Downloading" during software downloading

Message "Updating" during software updates
Sleeping
Message "Standby"
Malfunctioning

Indications that signify fan running stop, overheating, or other
faults

Hexadecimal error code following each indication
Press on the remote control, select Shut Down, and follow the onscreen instructions to
power off your TE30.
2.4 Using the Wizard
The Wizard helps to set the general, network, and camera parameters on your TE30 quickly
and conveniently.
Background
When configuring the TE30 for the first time, you can use the Wizard. For details, see the
HUAWEI TE30 Videoconferencing Endpoint Quick Start Guide.
If a USB flash drive is provided with your TE30, you can also load the configuration file on
the USB flash drive to configure your TE30. For details, see the HUAWEI TE30
Videoconferencing Endpoint Quick Installation Guide.
Procedure
Step 1 Choose Advanced Settings > Settings > Installation > Wizard.
The General screen is displayed.
Step 2 Set the general parameters according to Table 2-3 and Table 3-1.
Table 2-3 General parameters
Parameter
Description
Setting
Site name
Specifies the site name you want to be
superimposed on the video of your site
when it displays to other sites.
When your site joins a multipoint
conference, this site name is displayed in
the site list.
The default value is site.
Language
Specifies the language for the remote
The default value is English.