User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
13 Maintenance
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
106
13.2.1 Automatic Upgrade
With the automatic upgrade enabled, your TE30 obtains upgrade files from the specified
server and installs the upgrade files when the upgrade interval arrives.
Procedure
Step 1 Choose Advanced Settings > Settings > Installation > Auto Upgrade Settings.
Step 2 Set the automatic upgrade parameters by referring to Table 13-3.
Table 13-3 Automatic upgrade parameters
Parameter
Description
Setting
Auto upgrade
Specifies whether the automatic
upgrade function is enabled. If you
select this parameter, you must also set
Upgrade interval, Server address,
User name, and Password. Your
TE30 will obtain upgrade files from
the specified server and install the
upgrade files when the specified
upgrade interval is reached.
This parameter is
deselected by default.
Enable wireless MIC
auto update
Specifies whether to automatically
update the wireless microphone after it
is connected to the TE30.
This parameter is
selected by default.
Upgrade interval
Specifies the upgrade interval.
The default value is 0.5
h.
Value range: 0.5 h to 24
h.
Server address
Specifies the IP address of the server
used to store the upgrade files for your
TE30.
This parameter cannot
be left blank.
Example:
http://200.55.55.100/
User name
Password
Specify the user name and password
used by your TE30 to access the server
that store the upgrade files.
No default value is set
for this parameter.
Step 3 Select Save.
----End
13.2.2 Upgrading the TE30 Locally
You can use a computer to upgrade the TE30 locally.
Before the upgrade, note the following prerequisites:

The target software is saved to the computer.