T711 GSM Mobile Phone User Guide Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: mobile@huawei.com Website: www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Text Entry .................................................................. 8 Changing the Text Input Modes .................................. 8 Entering English Letters ............................................. 8 Entering Digits........................................................... 9 Entering Symbols....................................................... 9 5 Messaging.................................................................. 9 Writing and Sending a Text Message ........................
1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and it is for your reference only.
Keys and Functions Press … To … Make a call. Answer an incoming call. View Call logs in standby mode. Power on or power off the phone (by pressing and holding it for about 3s). End a call, or reject an incoming call. Return to standby mode. Display Menu in standby mode. Select the highlighted item. Display Contacts in standby mode. Return to the previous menu. Display Menu in standby mode. Confirm a selection. Access: Profiles ( Write message ( ), Inbox ( ), and Camera ( standby mode.
Press … To … - Enter numbers, letters, and characters. Call the voice mail center in standby mode (by pressing and holding the 1 key). Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys). Select a submenu item labeled with the corresponding number. In standby mode, press the key once to enter *, twice to enter +, and three times to enter P, and four times to enter w. Enable or disable the vibration mode (by pressing and holding the key for about 3s in standby mode).
Icon Indicates The stopwatch function is enabled. The headset is being used. The General profile is activated. An alarm is activated. The keypad is locked. Battery power level. Missed call(s). The Meeting profile is activated. The Outdoor profile is activated. The Mute profile is activated. 2 Getting Started Installing the SIM Card and Battery Ensure that the golden contact area on the SIM card is facing downward, and the beveled corner is properly aligned with the SIM card slot.
Removing the Battery and SIM Card a b Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displayed in animation. When the charging icon becomes static, the battery is fully charged. 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket. Using the Function Menu 1. In standby mode, press (Menu) or .
5. Press (Select) or to display the menu. 6. Press (Back) to return to the previous menu or exit the function menu. . To return to standby mode, press Phone Lock The phone lock protects your phone from unauthorized use. By default, the phone lock function is disabled. You can change the default phone lock code (1234) into any numeric string in the range of four to eight digits. Do remember your phone lock code. If you forget it, contact the service center.
When the keypad is locked, you can press to answer an incoming call or make emergency calls. 3 Voice Services Making a Call 1. In standby mode, enter the phone number. To make an international call, press twice consecutively to enter the plus sign (+). Then enter the international long distance code, country code or region code, area code, and phone number in sequence. To call an extension, enter the phone number, press three times consecutively to insert P, and then enter the extension number. 2.
Press Press (Mute) to mute the speaker, and then press (Reject) again to reject it. (Options) and select Accept to answer it. If the Cover answer function is enabled, you can open the slide to answer an incoming call. If the Any key function is enabled, you can press any key except and to answer an incoming call. 4 Text Entry Changing the Text Input Modes The indicator of the current text input mode is displayed on the upper left corner of the screen. You can press the text input mode.
In "eZi ABC", "eZi Abc" or "eZi abc" input mode, do as follows to enter an English word: 1. Press each key only once according to the spelling sequence of the desired word. The phone displays the commonly used word according to the numeric sequence of key presses. 2. Press 3. Press to scroll to the desired word. to enter the word. Entering Digits In "123" input mode, you can directly press number keys labeled with desired digits.
Send: to enter the phone number or select the recipient from the contact list Save and send: to add the recipient and set to save the message after sending it. Send to many: to add several recipients at a time. Send by groups: to add all members of a group as the recipients. 5. Press to send the message. Writing and Sending a Multimedia Message 1. Select Menu > Messages > MMS > Write message. 2. Select To, Cc or Bcc.
Contact your service provider for the availability of the Multimedia Messaging Service (MMS) and how to subscribe this service. The maximum size of a multimedia message depends on the network. Open multimedia messages with caution. Objects in multimedia messages may contain hazards that can damage your phone, such as malicious software. 6 Contacts Creating a Contact 1. Select Menu > Contacts > Add new contact. 2. Select To SIM or To phone for saving the contact. 3. Press to edit the contact. 4.
7 Multimedia Camera 1. Press in standby mode, or select Menu > Multimedia > Camera. 2. Press (Options), and then select to view the photo album or set relevant parameters. 3. Press to take a photo. 4. Press (Continue) to save the photo; press (Delete) to delete the photo. Video Recorder 1. Select Menu > Multimedia > Video recorder. 2. Press (Options) to set relevant parameters. 3. Press to start recording a video, and then press again to stop. Video Player 1.
FM Radio The headset cable can be used as an antenna. To ensure good reception of radio programs, do not disconnect the headset from the phone or bend the headset cable extremely. 1. Connect a compatible headset to the phone. 2. Select Menu > Multimedia > FM radio to activate the FM radio. After loading, the phone plays a program. 3. On the FM radio screen, you can do as follows. Press to stop/continue. and Press Press or to adjust the volume. to tune by 0.1 Hz.
8 WAP You can access WAP sites and use WAP-based services on your phone. To access the WAP sites through your phone, you need to subscribe the corresponding service from the service provider and set the relevant parameters on your phone. For details about the service and the charges, contact your service provider. Setting the Connection Profile To access the WAP sites on your phone, you need to set your account information first. The account information is provided by your service provider. 1.
9 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the mobile safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when it causes danger or interference with electronic devices.
in fuel depots, storage, and distribution areas, and chemical plants. Also, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmosphere that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Operating Environment Do not use or charge the device in dusty, damp or dirty places or places with magnetic fields. Otherwise, the circuit may not function properly. The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
hearing checked. If you continue to use high volume, your hearing will soon get affected. Hearing experts offer the following suggestions to protect your hearing: Reduce the time you use the receiver, earbuds, headphones, speakerphone, or earpieces at high volume. Do not increase the volume to block noisy surroundings. Reduce the volume if you cannot hear people speaking near you. Safety of Children Please comply with all precautions with regard to children's safety.
Battery and Charger The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and talk time are shorter than normal, replace the battery. Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause fire or the charger may not function properly. If the ambient temperature is considerably low or high, the capacity and life of the battery is reduced.
Do not dispose of batteries in fire as they may explode. Batteries may also explode if damaged. Clearing and Maintenance The device, battery, and charger are not water-resistant Keep them dry. Protect the device, battery and charger from water or vapor. Do not touch the device and charger with a wet hand. Otherwise, it may lead to short-circuit or malfunction of the device and electric shock to the user. Do not place your device, battery, or charger in places where it can get damaged because of collision.
device and the charger with a piece of damp and soft antistatic cloth. Do not dismantle the device or accessories. Otherwise, manufacturer is not liable to pay for damages as the device and accessories are not covered by warranty. Emergency Call You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.
Version: V100R001_01 24 NO.
