T330 GSM Mobile Phone Copyright © 2008 Huawei Technologies Co., Ltd. and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice.
Your Phone Earpiece Screen Navigation keys Left Soft key Right Soft key Talk / Soft key End / Power key OK key Number keys * key # key Charger interface / Headset jack 1
Keys and Functions Press… To… View the dialed, received or missed calls in the idle mode. Make or answer a call. Power on or off the phone (by pressing and holding it). End a call or reject an incoming call. Return to the idle mode. Confirm a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen.
Press… To… – Enter numbers and characters. Speed-dial phone numbers in the idle mode (by long pressing 2-9 keys). Select a submenu item labeled with the corresponding number. Enter the * symbol. Enable the Meeting or Outdoor profile (by pressing and holding it) in the idle mode. When editing, press it to display the symbol list. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it). Unlock the keypad by pressing . and Press it to switch between input modes when editing.
Icon Description Message received Icon Description Roaming General mode Battery level Missed calls Outdoor mode 4
Menu Tree 5
Installing the SIM Card and Battery Consult the network operator whether a SIM card is needed. Make sure that the golden area on the SIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. Removing the Battery and SIM Card Make sure that your phone is powered off. Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the arrow on the charger connector faces the front side of the phone. 2.
4. When the charging icon becomes static, the battery is fully charged. Disconnect the charger from the AC power socket. 5. Press the gray buttons on both sides of the charger connector inwards to disconnect the charger from the phone. Using the Function Menu 1. In the idle mode, press (Menu) to display the menu interface. 2. Press to scroll to a menu item. 3. Press (Ok) to display the menu. 4.
To make an international call, press and hold to enter the international long distance code of "+". Then enter the number to be dialed, in the format of "country code + region code + phone number". 2. Press 3. Press Note to dial the number. to end the call. When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. In the standby mode, press Select a record and press to view the dialed calls. to dial.
Phone Lock The phone lock protects your phone from unauthorized use. You can change it into any numeric string. If the phone lock function is enabled, you need to enter the correct phone lock code when the phone is powered on or in the standby mode. PIN and PUK The personal identity number (PIN) protects your SIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the blocked PIN. Both PIN and PUK are delivered with the SIM card. For details, consult your service provider.
Changing the Text Input Modes The indicator of the current text input mode is displayed on the to change the input mode. screen. In the editing mode, press Note In the editing mode, press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) to delete all the letters at a time. In the "eZi ABC", "eZi abc", "eZi Abc" input mode, press to enter a space. In the "ABC", " abc " or " Abc " input mode, press once to enter a space, twice to enter "0".
Entering English (ABC, abc and Abc) In the "ABC" ,"abc" or "Abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. If the letter you want to enter is on the same key as the previous one, you can enter the latter only after the cursor appears again or after you press to move the cursor to the next space. Entering Numbers In the "123" input mode, press a key labeled the desired number.
FM Radio Your phone integrates a frequency modulation (FM) radio. Before listening to the radio, insert the headset to the headset jack. Note The headset cable functions as the antenna. When listening to the radio, do not bind or wind the headset cable. Keep the headset cable straight for a better effect. 1. Switching on/off the Radio Insert the headset to the headset jack properly. In the idle mode, select Menu > FM Radio. After loading, the phone plays a program.
The phone automatically searches for channels and saves them to the channel list. Manual tuning and In the FM Radio screen, press to tune by 0.1 MHz. Then the phone searches for channels with the frequency from 87.5 MHz to 108 MHz. Setting a Frequency (Option) , then press In the FM Radio screen, press Manual Input. Enter a frequency: A frequency must range from 87.5 MHz to 108 MHz. (Clear) to clear the settings. Press to complete Press the settings and return to the FM Radio screen. 3.
Warnings and Precautions Electronic Device Power off your phone near high-precision electronic devices. The phone may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Gas station Area for storing fuels (such as the bunk under the deck of a ship) Device/Vehicle for transporting and storing fuels or chemical products Area with chemical substances and particles (such as: granule, dust, metal powder) in the air Area with the sign of "Explosives" Area with the sign of "Power off bi-direction wireless equipment" Area where it is generally suggested to stop the engine or a vehicle Traffic Safety Please observe local laws and regulations on phone use.
Storage Environment Do not place magnetic storage media such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them. Do not put your phone, battery, or other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. Do not leave your phone, battery, or charger in a very hot or cold place.
Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. Operating Environment The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. Do not use the phone in dusty, damp and dirty places or places with magnetic field.
While using the mobile phone, observe the local laws and regulations, and respect others' privacy and legal rights. Clearing and Maintenance Before you clean or maintain the phone, power off the phone and disconnect it from the charger. Otherwise, electric shock or short-circuit of the battery or charger may occur. Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused.
: This symbol indicates that the equipment carrying this mark must NOT be thrown into general waste but should be collected separately and properly recycled under local regulations. Emergency Call You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. Battery Use the battery approved by the manufacturer only. Otherwise, explosion may occur. Do not dispose of the battery in fire.
When installing the battery, do not push the battery by force lest battery fluid leak out or the battery crack. Do not take out the battery when the phone is turned on. If you do not use the battery for a long time, store it in normal temperature after charging. Charger Use the charger approved by the phone manufacturer only. Any violation of this rule may result in fire or malfunction of the charger. Do not short-circuit the charger.
When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused. Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This device complies with part 15 of the FCC Rules.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
