OptiX RTN 360 Radio Transmission V100R001C00 Product Description Issue 02 Date 2014-08-30 HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
OptiX RTN 360 Radio Transmission Product Description About This Document About This Document Related Versions The following table lists the product versions related to this document.
OptiX RTN 360 Radio Transmission Product Description About This Document Symbol Description Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.
OptiX RTN 360 Radio Transmission Product Description About This Document Updates are as follows. Update Description 1.2 Product Specifications Optimized the table containing product specifications. 3.4 Indicators Added an explanation for the link status of the STAT indicator. 5.1 Ethernet Service Specifications Optimized the table containing Ethernet service throughput specifications. A.2 Component Photos Added section "Component Photos." A.
OptiX RTN 360 Radio Transmission Product Description Contents Contents About This Document .................................................................................................................... ii 1 Product Introduction .................................................................................................................... 1 1.1 Network Application .....................................................................................................................................
OptiX RTN 360 Radio Transmission Product Description Contents 4 Network Management System ................................................................................................. 40 4.1 Network Management Solutions .................................................................................................................... 40 4.2 Web LCT ........................................................................................................................................................
OptiX RTN 360 Radio Transmission Product Description Contents A.3.7 IEEE Standards .................................................................................................................................... 88 A.3.8 Other Standards .................................................................................................................................... 89 Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction 1 Product Introduction About This Chapter The OptiX RTN 360 radio transmission system (RTN 360 for short) is a full-outdoor radio transmission product that operates at the V-band (a frequency band ranging from 59 GHz to 64 GHz). 1.1 Network Application RTN 360 is tailored for service backhaul for small cell base stations that are deployed on buildings or at the street level.
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction RTN 360 is a highly integrated full-outdoor radio transmission product. Its antenna, RF unit, and baseband unit are integrated into an outdoor unit that supports zero-footprint installation, providing carriers with cost-effective full-outdoor radio solutions. RTN 360 provides backhaul links for small cell base stations on buildings or at the street level in downtown areas. See Figure 1-1.
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction Product Specifications Antenna Built-in panel antenna Operating frequency band 59 GHz to 64 GHz Duplex mode TDD Radio working mode (modulation scheme/channel spacing) 16QAM/200 MHz Air-interface throughput ≥ 480 Mbit/s Maximum transmission distance 300 m Service port Two GE electrical service ports RF configuration mode 1+0 configuration Power supply mode Power over Ethernet (PoE), supplied by the DC power injecto
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction Figure 1-2 Site providing a one-direction microwave link RTN 360 From a remote RTN 360 Dock P&E NS LA WAN ch wit LAN0 To a small cell base station Downlink service If a small cell base station can serve as standard PSE, RTN 360s can directly receive power signals and service signals from the small cell base station. 1.3.
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction Figure 1-3 Site providing two microwave links in different directions RTN 360 RTN 360 Dock From a remote RTN 360 To a remote RTN 360 N LA P&E h itc Sw LAN0 LAN1 WAN To a small cell base station Downlink service 1.3.
OptiX RTN 360 Radio Transmission Product Description 1 Product Introduction Figure 1-4 Site providing multi-direction microwave links To a remote RTN 360 To a remote RTN 360 To a remote RTN 360 P&E P&E P&E CSHO ISV3 ISV3 EG4P EG4P IDU 950A From EPC Downlink service In addition to RTN 360s, the OptiX RTN 900 IDU may connect to FOs or ODUs operating at other frequency bands to implement backhaul. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features 2 Functions and Features About This Chapter RTN 360 provides a variety of functions and features. 2.1 Integration RTN 360 integrates a built-in antenna and uses a wide frequency band design, which allows a single chassis to cover the entire V-band. 2.2 TDD Time division duplex (TDD) has unique advantages over frequency division duplex (FDD) in asymmetric transmission and high frequency spectrum resource utilization. 2.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features A variety of technologies are used to simplify RTN 360 installation so that wireless installation personnel can deploy an RTN 360 within 30 minutes. 2.10 Easy Maintenance RTN 360 supports contact-free maintenance, powerful equipment-level OAM functions, and end-to-end TP-Assist. 2.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Wide Frequency Band RTN 360 uses a wide frequency band design, which enables a single chassis to cover the entire V-band from 59 GHz to 64 GHz. This eliminates the need to distinguish TX high and low sites, which means that spare parts need to be prepared for only one equipment model. Both RTN 360 and Huawei small cell base stations can be installed on walls and poles.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features 2.3 Automatic Frequency Selection RTN 360 supports automatic frequency selection, which enables it to automatically select an interference-free channel as the working channel. RTN 360 scans frequencies within a specified range to select interference-free channels. See Figure 2-3.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features In PoE mode, an outdoor network cable carries Ethernet service signals along with DC power signals. PoE has the following advantages: Reduces the number of power cables and simplifies installation. Enables RTN 360 to share power supplies with small cell base stations.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Item Description Link-state pass through (LPT) Supports simple LPT. When a microwave link is faulty, the related RTN 360 automatically disables the remote Ethernet port that is connected to a user-to-network interface (UNI) device. Quality of service (QoS) Supports QoS. For details, see 2.6 QoS. Traffic control Supports IEEE 802.3x-compliant traffic control. ETH OAM Supports IEEE 802.1ag- and IEEE 802.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Figure 2-4 shows how RTN 360 performs QoS processing for Ethernet services. Figure 2-4 QoS processing Packet switching Ingress Egress Queue traffic shaping Congestion avoidance Traffic monitoring Flow ... ... DiffServ Complex traffic classification ... ... Simple traffic classification Queue scheduling Buffer queue Threshold Forwarding Port shaping ... ... ... Mapping CAR CoS x ... CoS z Token bucket ... ...
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Function Description Ethernet ports. Queue scheduling Traffic shaping Supports eight levels of priority scheduling at both Ethernet ports and microwave ports. Flexibly sets the queue scheduling scheme for each Ethernet port and microwave port. The queue scheduling schemes include strict priority (SP), weighted round robin (WRR), and SP+WRR. Supports traffic shaping for egress queues and egress ports.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Network Management Modes RTN 360 supports the following network management modes: Uses the iManager U2000 Web LCT to manage local and remote NEs on a per-NE basis. Uses the Mobile LCT to manage local NEs on a per-NE basis through Wi-Fi. Uses the iManager U2000-T to manage Huawei OptiX RTN NEs and Huawei optical transmission products in a unified manner.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Uses TDD mode, in which signals are transmitted and received over the same frequency, eliminating the need to distinguish TX high and low sites and requiring spare parts for only one equipment model. Supports automatic frequency selection, simplifying microwave link frequency planning. Integrates panel antennas, simplifying installation.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features 2.10.1 Contact-Free Maintenance RTN 360 supports contact-free maintenance with its Wi-Fi module. The Mobile LCT or Web LCT can use Wi-Fi to connect to a local RTN 360 with a Wi-Fi module. Figure 2-6 Contact-free maintenance Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Figure 2-7 Access process through Wi-Fi After connecting to a local NE through Wi-Fi, the Mobile LCT or Web LCT can be used to configure the NE, and query NE alarms, and the Web LCT can also be used to query performance and logs, facilitating commissioning and maintenance. 2.10.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Table 2-4 Equipment-level OAM functions Function Description Management and monitoring Supports unified management of microwave transmission networks and optical transmission networks, and end-to-end service creation and management using the iManager U2000-T. Supports creation, configuration, and operation management of an RTN 360 using the iManager U2000-M. Reports a variety of alarms and performance events.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features 2.10.3 Packet OAM (TP-Assist) In compliance with the network-centered, service-centered, and intelligent packet network O&M trend, Huawei promotes a brand new O&M system based on the TP-Assist solution. The O&M system covers the entire O&M process from network planning to fault diagnosis. Table 2-5 describes the packet OAM functions supported by RTN 360.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Function measurement Visualized O&M Description Purpose monitoring and measurement system any measurement object and performance indicator in the network. rich service monitoring methods It supports 24-hour service status pre-warning and monitoring, and provides equipment performance threshold-crossing alarms and network performance threshold-crossing alarms.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features 2.11 Security Management RTN 360 works with its network management system (NMS) to prevent unauthorized logins and operations, ensuring equipment management security. Overview of Hardware Security RTN 360 uses the following hardware security measures: Microwave ports: The forward error correction (FEC) encoding mode is adopted and the adaptive time-domain equalizer for baseband signals is used.
OptiX RTN 360 Radio Transmission Product Description Plane Issue 02 (2014-08-30) 2 Functions and Features Function Description authorization remote accounts in a centralized manner to reduce maintenance costs. Security log Records events related to account management. Operation log Records non-query operations. Syslog management Provides a standard solution to offline storage of logs, addressing insufficient storage space.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features Plane Function Description Data plane Flow control Controls traffic at ports. Broadcast packets are suppressed. Unknown unicast packets and multicast packets are discarded. QoS is used to control service traffic. Discarding of incorrect packets Discards incorrect packets, such as an Ethernet packet shorter than 64 bytes. Loop prevention Detects self-loops at service ports and blocks self-looped ports.
OptiX RTN 360 Radio Transmission Product Description 2 Functions and Features All hazardous substances contained in the package can degrade quickly. Every plastic component that weighs over 25 g is labeled according to the ISO 11469 and ISO 1043-1 to ISO 1043-4 standards. All components and packaging come with standard recycling labels. Plugs and connectors are easy to find and are compatible with standard tools. All the attached materials, such as labels, are easy to remove.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure 3 Product Structure About This Chapter This chapter describes RTN 360's system architecture, service signal processing flow, external ports, indicators, and labels. 3.1 System Architecture RTN 360 integrates its functional units into a single chassis. 3.2 Service Signal Processing Flow This section describes how the functional units of RTN 360 process power over Ethernet (PoE) signals. 3.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Block Diagram Figure 3-1 Block diagram of RTN 360 OptiX RTN 360 SHUA2 Provides power to other units. Power unit -48 V Ethernet access unit PoE signal FE/GE signal GE signal Panel antenna Baseband processing unit Ethernet GE signal MUX switching unit unit Modem unit TDD unit RF proces sing unit Control signal Clock signal USB flash drive or Wi-Fi module Provides clock signal to other units.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Functional Unit Description protocols. Baseband processing unit RF processing unit Maps and demaps service signals to/from microwave frame signals. Processes overhead bytes in microwave frames. Performs forward error correction (FEC) coding and decoding. Modulates and demodulates digital signals. Converts between analog and digital signals.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure 3.2 Service Signal Processing Flow This section describes how the functional units of RTN 360 process power over Ethernet (PoE) signals.
OptiX RTN 360 Radio Transmission Product Description St ep 3 Product Structure Functional Unit Processing Flow flexible waveguide. Table 3-3 Signal processing in the receive direction St ep Functional Unit Processing Flow 1 RF processing unit Isolates and filters RF signals. Performs down-conversion and power amplification. Transmits the modulated signals to the baseband processing unit.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Port Positions Figure 3-3 Port positions The maintenance compartment contains a USB port, RSSI port, and an NMS port. See Figure 3-4. When RTN 360 is running, the protective cover of the maintenance compartment must be closed. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Figure 3-4 Front view of the management ports Table 3-4 Ports No . Port Description Connector Type 1 GE(e) GE electrical port RJ45 connector NOTE Do not remove the protective connector of a vacant GE electrical port.
OptiX RTN 360 Radio Transmission Product Description No . Port 3 Product Structure Description Connector Type LCT or Web LCT to the equipment. 4 You can obtain the received signal level (RSL) of an RTN 360 by testing the voltage at the RSSI port using a multimeter. RSSI port 5 NMS port The NMS port transmits network management signals. 6 PGND point - RJ45 connector NOTE RSSI port and NMS port share an RJ45 connector.
OptiX RTN 360 Radio Transmission Product Description Pin No.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure The RJ45 connector has two indicators that indicate the NMS port connection status. Table 3-7 describes what the indicator statuses mean. Table 3-7 Indicator status explanation Indicator Status Meaning LINK (yellow) On The NMS port connection is normal. Off The NMS port connection is interrupted. On or blinks The NMS port is receiving or transmitting data. Off The NMS port is not receiving or transmitting data.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Figure 3-6 Indicator positions Table 3-8 Indicator status explanation Indicator Indicator that indicates system operating status and link status (STAT) Operating status Link status Status Meaning Steady green The equipment is working properly and services at the air interface are normal. Steady red The hardware is faulty (for example, the equipment fails to start, or a HARD_BAD alarm is reported).
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Indicator Status Meaning difference between the actual receive power and the expected receive power is greater than 3 dB. USB port indicator Wi-Fi module USB flash drive Steady green The Wi-Fi module has been identified and is working properly. Steady red The Wi-Fi module is faulty. Off No Wi-Fi module is connected to the USB port. The Wi-Fi module connected to the USB port cannot be identified.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Label Positions Figure 3-7 Label positions High temperature warning label: Indicates that the equipment surface temperature may exceed 70°C when the ambient temperature is higher than 55°C. Wear protective gloves to handle the equipment. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 3 Product Structure Product Nameplate Label Figure 3-8 Product nameplate label Table 3-9 Product nameplate label description Label Information Description OptiX RTN 360 Indicates the product name. ITEM: 52450775 Indicates the product item for identifying the product model. -48V; 0.5A Indicates the power supply rated value. Supplied by P&E Indicates that PoE is used. Freq: 59.0–64.0 GHz Indicates the frequency range.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System 4 Network Management System About This Chapter This chapter describes network management solutions and the network management system (NMS) software used in these solutions. 4.1 Network Management Solutions Huawei provides complete transport network management solutions that satisfy the telecommunications management network (TMN) requirements for various function domains and customer groups of telecommunications networks. 4.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System The Mobile LCT, a local maintenance terminal running on a smartphone, manages local and remote NEs on a per-NE/hop basis through Wi-Fi. iManager U2000-T unified network management system The iManager U2000-T, a network-level management system, manages Huawei RTN, PTN, MSTP, and WDM products on transport networks in a unified manner.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System Figure 4-2 NE management window Figure 4-3 HOP management window 4.3 Mobile LCT The Mobile LCT is a local maintenance terminal running on a smartphone. The Mobile LCT manages an NE after connecting to the NE using Wi-Fi. Figure 4-4 shows a typical application scenario. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System Figure 4-4 Mobile LCT application scenario The Mobile LCT can create NEs by searching NEs, configure NE attributes, microwave links, and DCN, and query alarms. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System Figure 4-5 Workbench of the Mobile LCT 4.4 U2000-T The iManager U2000-T is a network-level management system (NMS) that manages Huawei fixed-line network products in a unified manner. The U2000-T provides topology management, which displays NE positions and connections between NEs. See Figure 4-6. The U2000-T manages network-level alarms, performance, inventory, and security, and end-to-end service configurations.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System Figure 4-6 Topology management interface of the U2000-T Figure 4-7 End-to-end service configuration interface of the U2000-T Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 4 Network Management System Figure 4-8 NE Explorer interface of the U2000-T 4.5 U2000-M The U2000-M is a network-level management system that manages Huawei mobile communications products in a unified manner. The U2000-M displays connections between RTN 360s and base stations. The U2000-M can manage RTN 360s using its built-in NE Explorer. Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description 5 Technical Specifications 5 Technical Specifications About This Chapter This chapter describes the technical specifications of OptiX RTN 360. 5.1 Ethernet Service Specifications This section describes the service throughput for Native Ethernet services on a hop of microwave link. 5.2 RF Performance This section describes major RF performance of RTN 360, including the frequency band, transmit power, and receiver sensitivity. 5.
OptiX RTN 360 Radio Transmission Product Description 5 Technical Specifications Throughput of Ethernet Services Ratio of Timeslots for Uplink Data to Those for Downlink Data (Uplink:Downlink) Uplink Throughput (Mbit/s) Downlink Throughput (Mbit/s) 1:1 244 to 313 244 to 313 1:2 161 to 206 328 to 419 2:1 328 to 419 161 to 206 1:3 118 to 152 372 to 476 3:1 372 to 476 118 to 152 The throughput is measured assuming that untagged Ethernet frames with length ranging from 64 bytes to 9600 bytes
OptiX RTN 360 Radio Transmission Product Description 5 Technical Specifications Table 5-2 Antenna performance Item Performance Antenna gain 34.5 dBi SWR 10 dB 3 dB beamwidth 1.9º XPD 21 dB Front-to-back ratio (FBR) > 48 dB Regulatory compliance ETSI class 2 5.4 Predicted Reliability This section describes the predicted equipment reliability of a single RTN 360 and the predicted link reliability of a hop of microwave link forming by two RTN 360s.
OptiX RTN 360 Radio Transmission Product Description 5 Technical Specifications 5.5 Integrated System Performance Integrated system performance includes the dimensions, weight, power consumption, and power supply. Mechanical Performance and Power Consumption Item Performance Dimensions (H x W x D) 192.5 mm x 192.5 mm x 70 mm Weight 2.5 kg Typical power consumption 20 W Power supply Supports power over Ethernet. The input PoE voltage ranges from –38.4 V to –57.6 V.
OptiX RTN 360 Radio Transmission Product Description 5 Technical Specifications Environment RTN 360 is used outdoors. Table 5-5 Environment performance Item Performance Major reference standards Temperature Operating Compliant with EN 300 019-2-4 Transport ation Compliant with EN 300 019-2-3 class 2.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories 6 Accessories About This Chapter RTN 360 describes all the accessories. 6.1 Power Injector A power injector (PI) transmits GE signals together with -48 V power signals to an RTN 360 through a network cable. 6.2 Dock Dock is a type of outdoor power sourcing equipment (PSE) with the built-in Layer 2 switching function. It often provides power to both RTN 360 and Huawei small cell base stations. 6.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Table 6-1 Differences between PIs OptiX RTN PI-DC A10 OptiX RTN PI-DC B10 OptiX RTN PI-DC A11 Application scenario Indoor equipment room and outdoor cabinet Outdoor (not on a tower) Indoor equipment room and outdoor cabinet Dimensions 38.6 mm x 145.6 mm x 185 mm 43.6 mm x 164 mm x 226 mm 36.0 mm x 145.6 mm x 84 mm Weight 0.8 kg 1.3 kg 0.5 kg Input power supply –38.4 V to –57.6 V –38.4 V to –57.6 V –38.4 V to –57.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Features and Functions Switches between the standard PSE power mode or forced power mode through a dual in-line package (DIP) switch. Receives/Transmits a channel of electrical GE service signals. Receives a channel of -48 V DC power signals. Couples -48 V power signals to eight pins of the GE electrical port and transmits them to an RTN 360 through an outdoor network cable. See Figure 6-2.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Ports Figure 6-3 and Figure 6-4 show the ports on a PI. Figure 6-3 Ports on the front panel of a PI Figure 6-4 Port on the rear side of a PI Table 6-2 Ports on a PI Port Description Connector Type Required Cable RTN (+) BGND 2-pin terminal block 7.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Port Description Connector Type Required Cable used. If the DIP switch is on the FORCE side, the forced power mode is used.RTN 360 does not use the forced power mode. NOTE The switch should be set to the planned value before the PI is powered on. After the PI is powered on, the mode cannot be changed. The GE service port, NMS port, and P&E port use RJ45 connectors. Figure 6-5 shows the front view of an RJ45 connector.
OptiX RTN 360 Radio Transmission Product Description Pin 6 Accessories 10/100BASE-T(X) 1000BASE-T Signal Signal Function Function (-) 6 RX- Receiving data (-) BIDB- Bidirectional data wire B (-) 7 Reserved - BIDD+ Bidirectional data wire D (+) 8 Reserved - BIDD- Bidirectional data wire D (-) Table 6-4 Pin assignments for an RJ45 connector in MDI-X mode (Ethernet service signals) Pin 10/100BASE-T(X) 1000BASE-T Signal Function Signal Function 1 RX+ Receiving data (+) BIDB+ B
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Pin Signal 2 BGND 3 Power signal (-48 V) 4 BGND 5 BGND 6 Power signal (-48 V) 7 Power signal (-48 V) 8 Power signal (-48 V) The NMS and MGMT ports transmit network management signals. Table 6-6 lists their pin assignments.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Indicator Status Meaning Off P&E is not being output. 6.1.3 PI Labels This section lists the labels that are attached to a power injector (PI). Adhere to any warnings or instructions on the labels when performing various tasks to avoid any personal injury or damage to equipment.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Example of the Label Content Parameter Parameter Description outdoor 电源额定值 POWER RATING ： -48V; 2.6A 2.2A 4: Number of channels 1: one power-overEthernet channel 5: Version number - - PI power supply rated value 6.1.4 Technical Specifications The technical specifications of power injectors (PIs) include electromagnetic compatibility, anti-interference capability, safety, and environmental standards.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Safety Passed CE authentication Compliant with EN60950-22 Compliant with IEC60950-22 Compliant with IEC60950-1 Compliant with EN60950-1 Environment Table 6-9 Environment performance Item Specifications Major reference standards Operating Compliant with EN 300 019-1-4 class 4.1 Transportation Compliant with ETSI EN 300 019-1-2 class 2.3 Storage Compliant with ETSI EN 300 019-1-1 class 1.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Appearance Figure 6-7 Appearance Features and Functions Issue 02 (2014-08-30) Power supply functions − Receives 220 V AC power and converts it to -57 V DC power. − Outputs -57 V DC power signals coupled with Ethernet service signals through the LAN0, LAN1, and WAN ports, implementing power over Ethernet (PoE). − Supports the standard PSE power mode and forced power mode (PSE stands for power sourcing equipment).
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Supports configuration management, security management, and system management. For more details, see related documents of Huawei Atomcell. 6.2.2 Ports and Indicators Ports are inside a Dock, and indicators are outside a Dock. Ports Figure 6-8 Ports The following describes ports of a Dock.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Port Description L/N/PE Port that connects to external power equipment through a live wire, neutral wire, or PE cable EXT-ALM Environment monitoring port that provides four-line dry contacts to connect external devices and monitor alarms WAN PoE port that connects to external transmission equipment LAN0 PoE port that connects to a small cell base station LAN1 PoE port that connects to commissioning equipment or lower-level casca
OptiX RTN 360 Radio Transmission Product Description 6 Accessories The following table describes indicators of a Dock. Table 6-11 External indicators Indicator Meaning Status Description RUN Running status Steady green Power supply is available, but the Dock is faulty or has just been powered on. Off No power supply is available, or the Dock is faulty. Blinks green (on for 1s and off for 1s) The Dock is running properly. Blinks green (on for 0.125s and off for 0.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Indicator Meaning Status Description up on the port. Orange indicator: data transmission OPT Optical port status Blinks orange The port is receiving or transmitting data. Off The port is not receiving or transmitting data. Steady green The port connection status is normal, and the port is not receiving or transmitting data. Blinks green The port is receiving or transmitting data. Off No connection is set up on the port. 6.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Power Consumption Power consumption ≤ 35 W 6.3 USB Flash Drives Configuring, replacing, and upgrading RTN 360s is simple with USB flash drives, which store NE data and new software to be installed and are also used to back up configuration data. Functions and Features USB flash drives prepared for RTN 360s store NE software and configuration data (including databases, system parameters, and scripts).
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Data is saved in the \pkg folder only when the NE software is upgraded. Otherwise, keep the folder empty. patch: stores the patch software. sysdata: stores system parameters. script: stores scripts. db: stores NE databases. license: stores a license. The license directory cannot be backed up or restored. It is usually empty. devicetype: stores device type parameters.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Table 6-13 Types of USB flash drives No. Manufacturer Model Capacity 1 Netac U208 4 GB 6.4 Wi-Fi Module A Wi-Fi module for an RTN 360 enables the Mobile LCT or Web LCT to connect to the RTN 360 using Wi-Fi, implementing contact-free configuration and maintenance. Appearance Figure 6-10 Wi-Fi module Specifications Table 6-14 Wi-Fi module specifications Item Specifications Port USB2.
OptiX RTN 360 Radio Transmission Product Description 6 Accessories Item Specifications 54 Mbit/s: -68 dBm@10% PER 11 Mbit/s: -85 dBm@8% PER 6 Mbit/s: -88 dBm@10% PER 1 Mbit/s: -90 dBm@8% PER Wi-Fi encryption mode WPA2-PSK Setting of the service set identifier (SSID) Supported Setting whether to enable Wi-Fi Supported Setting of Wi-Fi passwords Supported Maximum transmission distance 30 m (laptop/mobile phone) 70 m (laptop + external Wi-Fi network adapter) NOTE 30 m is obt
OptiX RTN 360 Radio Transmission Product Description 7 Cables 7 Cables About This Chapter This chapter describes the purpose, physical appearance, and connections of various cables used with OptiX RTN 360s. 7.1 Outdoor Network Cables Fitted with RJ45 connectors at both ends, outdoor network cables connect Ethernet ports. 7.2 RSSI Cables Received signal strength indicator (RSSI) cables connect RSSI ports of RTN 360s to multimeters. 7.
OptiX RTN 360 Radio Transmission Product Description 7 Cables Cable Diagram Figure 7-1 Network cable Pin Assignments Table 7-1 Pin assignments for straight-through cables Connector X1 Connector X2 Color Relationship X1.1 X2.1 White/Orange Twisted pair X1.2 X2.2 Orange X1.3 X2.3 White/Green X1.6 X2.6 Green X1.4 X2.4 Blue X1.5 X2.5 White/Blue X1.7 X2.7 White/Brown X1.8 X2.
OptiX RTN 360 Radio Transmission Product Description 7 Cables Straight-through cables are used between MDIs and MDI-Xs, and crossover cables are used between MDIs or between MDI-Xs. The only difference between straight-through cables and crossover cables is with regard to their pin assignments. Either straight-through cables or crossover cables can be used to connect RTN 360 to common Ethernet equipment since Ethernet electrical ports support the MDI, MDI-X, and auto-MDI/MDI-X modes.
OptiX RTN 360 Radio Transmission Product Description 7 Cables 7.3 Power Cables Power cables connect PIs to power supply devices and supply them with -48 V power. Cable Diagram Figure 7-3 PI power cable Cable Parameters Table 7-4 Cable parameters Cable Cable Parameter Terminal Parameter Indoor-PI power cable Power cable, 600 V, UL3386, 1.5 mm2, 16 AWG, blue/black, XLPE Common connector, 2-pin, single row, 5.08 mm (pitch) 7.
OptiX RTN 360 Radio Transmission Product Description 7 Cables 7.5 PI PGND Cables Power injector (PI) PGND cables connect the ground points on the left of indoor PIs to external equipment's ground points (for example, cabinets' ground columns), so indoor PIs and external equipment share the same ground. Cable Diagram Figure 7-5 Indoor-PI PGND cable Main label 1 1. Bare crimp terminal, OT Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description A Appendix A Appendix A.1 Port Loopbacks The loopback capabilities of ports on RTN 360 differ based on the port type. A.2 Component Photos This section provides photos of major components of an RTN 360. A.3 Compliance Standards A.1 Port Loopbacks The loopback capabilities of ports on RTN 360 differ based on the port type.
OptiX RTN 360 Radio Transmission Product Description A Appendix Figure A-2 Rear view Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description A Appendix Figure A-3 Ports PI Figure A-4 OptiX RTN PI-DC A10 Figure A-5 OptiX RTN PI-DC B10 Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description A Appendix Figure A-6 OptiX RTN PI-DC B10 (interior) Figure A-7 OptiX RTN PI-DC A11 Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description A Appendix Dock Figure A-8 Dock Issue 02 (2014-08-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
OptiX RTN 360 Radio Transmission Product Description A Appendix A.3 Compliance Standards A.3.1 ITU-R Standards OptiX RTN 360 complies with the ITU-R standards designed for radio equipment. Table A-2 ITU-R standard Standard Description ITU-R F.1093 Effects of multipath propagation on the design and operation of line-of-sight digital fixed wireless systems ITU-R F.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description ITU-R P.836 Information on water vapour density ITU-R F.2107 characteristics and applications of fixed wireless systems operating in frequency ranges between 57 GHz and 134 GHz ITU-R SM.328 Spectra and bandwidth of emissions ITU-R SM.1045 Frequency tolerance of transmitters ITU-R SM.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description ITU-T G.8010 Architecture of Ethernet layer networks ITU-T G.8021 Characteristics of Ethernet transport network equipment functional blocks ITU-T Y.1291 An architectural framework for support of quality of service (QoS) in packet networks ITU-T K.20 Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents ITU-T K.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description input to telecommunications equipment; Part 2: Operated by direct current (dc) ETSI EN 300 019-1-1 (Class 1.2) Environmental conditions and environmental tests for telecommunications equipment; Part 1-1: Classification of environmental conditions;Storage Class 1.2 ETSI EN 300 019-1-2 (Class 2.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description Directive ETSI EN 302 217-4-1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas ETSI EN 302 217-4-2 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-2: Antennas; Harmonized EN covering the essential requirements of article 3.
OptiX RTN 360 Radio Transmission Product Description A Appendix A.3.5 IEC Standards OptiX RTN 360 complies with the IEC standards related to the waveguide. Table A-6 IEC standards Standard Description IEC 60154-1 Flanges for waveguides. Part 1: General requirements IEC 60154-2 Flanges for waveguides. Part 2: Relevant specifications for flanges for ordinary rectangular waveguides IEC 60154-3 Flanges for waveguides.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description IEC 60529 Degrees of protection provided by enclosures IEC 721-3-4 Classes 4K2/4Z5/4Z7/4B1/4C 2(4C3)/4S2/4M5 (Outdoor Unit) Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weather protected locations.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description RFC 4664 Framework for layer 2 virtual private networks (L2VPNs) RFC 3289 Management information base for the differentiated services architecture RFC 3644 Policy quality of service (QoS) Information model RFC 3670 Information model for describing network device QoS datapath mechanisms RFC 2212 Specification of guaranteed quality of service RFC 2474 Definition of the Differentiated Services Field(DS Field) in
OptiX RTN 360 Radio Transmission Product Description A Appendix A.3.8 Other Standards This section describes other standards with which OptiX RTN 360 complies.
OptiX RTN 360 Radio Transmission Product Description A Appendix Standard Description < – 16 A per phase and not subject toconditional connection EN 61000-4-2 CENELEC. EMC Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity test EN 61000-4-3 CENELEC. EMC Part 4: Testing and measurement techniques Section 3: Radiated, radio-frequency, electromagnetic field immunity test. EN 61000-4-4 CENELEC.
