Quick Installation Guide

Appearance and ports

Equipment Components

Installing an RTN 360

04/05 >>

Port P&E (receiving both

services and power

signals)

Port GE(e)

Mounting kits

1. Attachment plate (installed before delivery)

2. Hose clamp (used when an RTN 360 is installed on a pole)

3. Azimuth adjustment nut

4. Fastener (with holes used for installing an RTN 360 on a wall or pole)

5. Elevation adjustment nut

Maintenance

compartment

RSSI/NMS port

USB port

Inside the maintenance compartment

Holes for mounting an

alignment scope

Ground screw

Front view

Rear view

USB flash drive

• The recommended USB flash drive is a 4 GB Netac U208. If a

different model or capacity is required, contact the local Huawei

office. USB flash drives not meeting requirements may be

incompatible.

• The appearance of the shipped USB flash drive may differ from

that shown here.

Alignment scope

Mounting frame

Lens

Eyepiece

OT terminal

Ground cable

• The ground terminal can connect to a ground bar or U-shaped ground

clip.

• For information about how to connect the ground terminal to a U-

shaped ground clip, see the usage description document supplied with

the clip.

Ground terminal