Installation Guide
Table Of Contents
- About This Document
- Contents
- 1 Changes in the RRU3260 Installation Guide
- 2 Installation Preparations
- 3 Information About the Installation
- 4 Unpacking the Equipment
- 5 Installation Process
- 6 (Optional) Installing the Plastic Shells of the RRU
- 7 Hoisting an RRU and Related Cables onto a Tower
- 8 Installing the RRU
- 9 Installing RRU Cables
- 9.1 Cabling Requirements
- 9.2 Cable Connections
- 9.3 Installation Process
- 9.4 RRU Cable List
- 9.5 Installing an RRU PGND Cable
- 9.6 Installing an RRU RF Jumper
- 9.7 Installing an RRU AISG Multi-Wire Cable and AISG Extension Cable
- 9.8 Installing an RRU Alarm Cable
- 9.9 Opening the Cover Plate of an RRU Cabling Cavity
- 9.10 Installing an RRU Power Cable
- 9.11 Installing a CPRI Fiber Optic Cable
- 9.12 Closing the Cover Plate of an RRU Cabling Cavity
- 10 Checking the RRU Hardware Installation
- 11 Powering On an RRU
- 12 Appendix
8.1 Mounting Kits for an RRU
This section describes the bracket assembly and the attachment plate for an RRU.
Figure 8-1 shows the front and rear of an RRU.
Figure 8-1 Front and side view of an RRU
(1) Attachment plate
Figure 8-2 shows the bracket assembly for an RRU.
Figure 8-2 12 L blade RRU mounting kit
(1) Main bracket
(2) Pole installation
bracket
(3) Auxiliary bracket (4) Nut (5) Square-neck
bolt
(6) Hoist clamp on
the main bracket
RRU3260
Installation Guide 8 Installing the RRU
Issue () Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54