Quick Start
Thank you for purchasing the Mobile WiFi. This Mobile WiFi brings you a high speed wireless network connection. This document will help you understand your Mobile WiFi so you can start using it right away. Please read this document carefully before using your Mobile WiFi. For detailed information about the functions and configurations of the Mobile WiFi, refer to the online help on the web management page that comes with the Mobile WiFi.
Getting to Know Your Mobile WiFi Note: The Mobile WiFi function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. Application Scenarios Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can all access the Internet through Mobile WiFi. The specific connection procedure depends on the operating system of the Wi-Fi device or computer. Establish a connection according to your device's specific instructions.
Scenario 1: Accessing the Internet Using an LTE, 3G, or 2G Network The Mobile WiFi uses your operator's LTE, 3G, or 2G network to access the Internet.
Scenario 2: Accessing the Internet Using a Wi-Fi Network When you use the Mobile WiFi in Wi-Fi coverage areas, for example, an airport, cafe, hotel, or your home, the Mobile WiFi can access the Internet via Wi-Fi networks, helping save your LTE, 3G, or 2G network usage.
Appearance 1 2 4 3 5 Power button Screen Micro USB port Menu button Lanyard hole 5
Screen 1 2 3 R 3G 4 5 6 1 Inter WLAN on Signal strength : Signal strength from weak to strong. R: Data roaming turned on. Network type 2G/3G/4G: Connected to a 2G/3G/LTE network.
Wi-Fi Wi-Fi turned on. Number of connected Wi-Fi devices. Battery SMS New messages. Number of new messages. Network connection status : Battery level from low to high. Internet connection is set up. Internet WLAN status Internet WLAN turned on.
Traffic statistics Data traffic information. Connection time. Note: Data traffic information is for your reference only. For more accurate data traffic information, please consult your service provider.
SSID and Wireless Network Encryption Key When a Wi-Fi device establishes a connection to the Mobile WiFi for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. These are printed on the Mobile WiFi. It is recommended that you can log in to the web management page and change your SSID and wireless network encryption key. To view the current SSID and wireless network encryption key on the screen, perform the following steps: 1.
2. Press the MENU button. 3. Press the button.
Getting Started Installing Caution: Use a standard SIM card compatible with the Mobile WiFi, otherwise you will damage your Mobile WiFi. Install the SIM card, microSD card, and battery according to the illustration.
Note: The microSD card is an optional accessory. If no microSD card is included in the package, please purchase one separately. Charging the Battery If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the battery for a while before attempting to power on the Mobile WiFi.
all warranties, whether expressed or implied, on the product. The charger is an optional accessory. If it is not included in the package, you may contact an authorized dealer to buy an adapter compatible with the Mobile WiFi. The Mobile WiFi’s charger model is HW-050100X1W. X represents U, E, B, A, or J, depending on your region. For details about the specific adapter model, contact an authorized dealer.
Supplying Power to Devices You can connect the Mobile WiFi to the AF10, and then connect the AF10 to other devices, such as a mobile phone, MP3 player, MP4 player, or Bluetooth headset. In this case, the Mobile WiFi works as a charger and supplies power to those devices. 1 2 3 Note: The AF10 is an optional accessory. If it is not included in the package, you can purchase one separately. For details about the AF10, see its user manual.
Turning on the Mobile WiFi Press and hold the button until the screen lights up, indicating that the Mobile WiFi is turned on. You can log in to the web management page and turn the fast boot function on or off. This function greatly reduces the Mobile WiFi's boot-up time. Note: Press and hold the button to turn off the Mobile WiFi. If your Mobile WiFi malfunctions or cannot be properly powered off, press and hold button for at least 10 seconds to forcibly power off your Mobile WiFi.
Connecting to the Internet Using an LTE, 3G, or 2G Network The Mobile WiFi's management parameters have been preset according to your operator's requirements. If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not transmitted for a period of time, the Mobile WiFi will automatically disconnect from the network connection. Note: You can log in to the web management page and enable or disable the automatic dialing while roaming function.
Using a Wi-Fi Network 1. 2. Ensure that the Internet WLAN function is enabled. The Mobile WiFi automatically connects to a Wi-Fi hotspot set by your service provider or and the Wi-Fi yourself. When the Mobile WiFi is connected to a Wi-Fi network, hotspot SSID are displayed on the screen. Note: After connecting to a Wi-Fi network, the Mobile WiFi automatically reconnects to the network the next time you are under that network's coverage.
Logging In to the Web Management Page 1. Make sure the connection between the Mobile WiFi and the Wi-Fi device or computer is working normally. 2. Open the browser, and enter http://192.168.8.1 in the address box. Note: Change this IP address if it conflicts with another IP address in the network. For details, see the online help on the web management page. 3. Enter the user name and password to log in to the web management page. Note: The default user name is admin. The default password is admin.
Daily Use Battery Saving Mode If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode, in which the display screen turns off. Pressing any button causes the display screen to light up. When the Mobile WiFi is being powered only by the battery, you can choose to enable or disable the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices access the Mobile WiFi for a period of time, the Wi-Fi turns off automatically.
Turning Internet WLAN On or Off To turn Internet WLAN on or off, perform the following steps. Alternatively, you can log in to the Mobile WiFi's web management page to enable or disable the Internet WLAN. 1. Press the MENU button for three times, move the selection bar to Inter WLAN. to turn Internet WLAN on or off. 2. Press Adding a Wi-Fi Hotspot 1. 2. 3. Log in to the web management page. From the settings page, choose Internet WLAN. Scan for Wi-Fi hotspots and connect to the desired one.
Restoring to Factory Settings If you forget some configuration parameters, you can restore the Mobile WiFi to its factory settings and then configure the Mobile WiFi again. Press and hold the Reset button until the display screen turns off. The Mobile WiFi is then restored to its factory settings. Note: Re se t Re se t After you carry out this operation, the Mobile WiFi's personal configuration parameters will all be deleted.
Example 1: Connecting to a Game Console (for example, PSP) through Wi-Fi 1. 2. 3. 4. 5. 6. 7. On the PSP, turn on the WLAN. Choose Settings > Network Settings. Select Infrastructure Mode. Select New Connection, and enter the connection name. Select Scan to search for wireless networks. A list of access points will be displayed on the screen. Select the access point with the Mobile WiFi's SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct wireless network encryption key.
8. 9. Select Test Connection to test whether the network connection is successful. You can now open the browser and access the network.
Example 2: Connecting to a Tablet Computer (for example, iPad) through Wi-Fi 1. 2. Touch Settings > WLAN to turn on WLAN. The tablet computer automatically searches for wireless connections and displays a list of access points. 3. Select the access point with the Mobile WiFi's SSID. 4. If required, enter the correct wireless network encryption key, and tap Join. (The lock icon indicates that the encryption key is required to connect to this wireless network.
Tips When the Mobile WiFi is in use for an extended period of time, it will become warm and may overheat. Should this happen, the Mobile WiFi will automatically close the network connection and turn off to protect itself from damage. If this occurs, place the Mobile WiFi in a well ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal. If you are unable to use the Mobile WiFi as normal, try the following: Consult the online help on the web management page.
TM is a trademark of ETSI.
