Quick Start Guide

ManualsBrandsHuawei Technologies ManualsCell PhonesSmart Phone

Table Of Contents

Know Your Device
Getting Started
- Follow the instructions in the following figures to set up your device. Please use the eject pin included.
- Single-SIM:Dual-SIM:
Dual Card Dual Standby Single Pass (dual-SIM devices only)
- Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.lWhen you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.lWhen you are using SIM card 1's data service, SIM card 2's data service will be disabled.Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions.
For More Information
Safety Information
Legal Notice
A
- _

Quick Start Guide

MRD-LX3

Summary of content (10 pages)

PAGE 1
Quick Start Guide MRD-LX3
PAGE 2
Know Your Device Before using the device, familiarize yourself with its basic operations. l To power on your device, press and hold the power button until the screen turns on. l To power off your device, press and hold the power button, l l and then touch . To restart your device, press and hold the power button, and then touch . Press and hold the power button for 10 or more seconds to forcibly restart your device.
PAGE 3
Getting Started Do not insert or remove the SIM card when your device is powered on. l Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. l Be careful not to scratch your device or hurt yourself when using the eject pin. l Store the eject pin out of the reach of children to prevent accidental swallowing or injury. l Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot).
PAGE 4
Dual Card Dual Standby Single Pass (dual-SIM devices only) Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously. l When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls.
PAGE 5
For More Information If you encounter any problems while using your device, you can obtain help from the following resources: l Visit http://consumer.huawei.com/en to view device information, frequently asked questions and other information. l Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region. Go to Settings and touch System > About phone > Legal to view legal information for your product.
PAGE 6
Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety l l l l l l l l l l l To prevent possible hearing damage, do not listen at high volume levels for long periods. Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
PAGE 7
l chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body.
PAGE 8
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
PAGE 9
Legal Notice Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android™ is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
PAGE 10
96725418_01