Quick Start Guide

ManualsBrandsHuawei Technologies ManualsElectronicsLTE Module

Table Of Contents

No part of this document may be reproduced or transmitted in any form or by any means without

prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei Technologies

Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify,

decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said

software, unless such restrictions are prohibited by applicable laws or such actions are approved

by respect ive copyright holders under licenses.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei Technologies

Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software installed,

capacities and sett ings of local network, and may not be act ivated or may be limited by local

network operators or network service providers, thus the descriptions herein may not exactly

match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any informat ion or

specifications contained in this manual without prior notice or obligat ion.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY

APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,

Summary of content (7 pages)

PAGE 1
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
PAGE 2
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
PAGE 3
Contents Gett ing to Know the ME206V-561 .....................................................................................................1 Assembly ..........................................................................................................................................
PAGE 4
Thank you for purchasing HUAWEI ME206V-561 LTE Module (hereinafter referred to as the ME206V-561) Note:  This manual briefly describes the preparat ion, Assembly and safety precaut ions.  You are recommended to read the manual before using the ME206V-561 Getting to Know the ME206V-561 The module is standard M.2 interface with a dimension of 30 mm × 42 mm × 2.3 mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment.
PAGE 5
2
PAGE 6
1. AUX/GPS Antenna interface It is used to connect an antenna which for diversity and GPS 2. MAIN Antenna interface It is used to connect an antenna which for main TX and RX 3. Fixing hole A screw, metal fastener, and nut are used to fix an ME206V-561 module on a development board through this fixing hole. 4. Gold Finger It is connected to the M.2 connector on the development board. Note:  In certain cases, your development board may be disassembled only by the professionals.
PAGE 7
 Before you install the ME206V-561 onto the development board, consult the development board manufacturer or read the user manual of the development board. Assembly It refers to M.2 specificat ion. The module will need a mechanical retent ion at the end of the board. The module specifies a 5.5 mm Dia. keep out zone at the end for attaching a screw. The module Stand-off and mount ing screw also serve as part of the module Electrical Ground path.