Smart Home Gateway EchoLife LS1015 Quick Start
Safety Precautions To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Safety precautions: Keep the device out of the reach of children as the components or accessories may be swallowed. The power supply voltage of the device must meet the requirements on the input voltage of the device. Do not use any power adapters that are not in the standard configuration.
Getting to Know Your Smart Home Gateway Smart Home Gateway EchoLife LS1015 the nameplate on the Power supply See device Power adapter input 100-240V AC, 50-60 Hz Wi-Fi standard IEEE 802.
Quick Installation Hardware Connection Power socket ONT, xDSL Modem or other network device Step 1 Use a network cable to connect the Internet port to ONT, xDSL Modem or other network device. Step 2 Use a power adapter to connect the Power port to the power socket.
Port Description Port Name Power LAN Description Connects to the power source to supply power to the Smart Home Gateway EchoLife LS1015. LAN port used for new functions in the future. Internet To be connected to the LAN port of the ONT, xDSL Modem or other network device. USB USB 2.0 port used for new functions in the future. NOTE Use the power adapter in the packing case. Otherwise, the Smart Home Gateway EchoLife LS1015 may be damaged. The product image in this manual is for reference only.
Indicator Description LED Power Internet Camera Z-Wave Service LED Status Description Solid on The power supply is normal. Off The power supply is off. Solid on Internet connection is normal. Off Internet connection is interrupted. Solid on The Wi-Fi port is enabled. Blinking The gateway is searching for devices. Off The Wi-Fi port is disabled. Solid on The Z-Wave port is enabled. Blinking The gateway is searching for or removing Z-Wave devices. Off The Z-Wave port is disabled.
NOTE The Smart Home Gateway EchoLife LS1015 connects to the camera and sensor devices through wireless signals. The wireless network coverage is subject to the number, thickness, and positions of walls, materials, ceilings, or other objects that radio signals traverse. Besides, material type and background radio frequency (RF) noise also affect the coverage of a wireless network. You can maximize the coverage of a wireless network using the following methods: 1.
Troubleshooting When the connectivity is not available: Check whether the Internet port of the Smart Home Gateway EchoLife LS1015 is properly connected. Check whether the ONT, xDSL modem, or other network device has a connection to the Internet. If necessary, contact your network provider. When intelligent devices cannot be connected: Check whether the Smart Home APP allows for adding of a new device.
When one of the Smart Home Gateway EchoLife LS1015 indicators are off: Power: Check the power supply of the gateway. Internet: Contact the local carrier to check whether Internet network is normal. Camera: WiFi interface is down. Contact your network provider. Z-Wave: Z-Wave interface is down. Contact your network provider. Service: The gateway is disconnected from the IoT platform. Contact your network provider.
Authentication Declaration 1. Multi-Vendor Sensor Access This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of network. 2.
2. Deleting a Sensor To delete a sensor, perform the following steps: Step 1 On the device management page, touch the sensor to be deleted. Step 2 On the device details page, touch the menu on the upper right. Step 3 In the displayed menu, touch Delete. Step 4 Delete the sensor as prompted. After each operation is complete, touch Next to go to the next page. The SmartHome app provides different pages for deleting different types of sensors. Step 5 The sensor is deleted successfully. 3.
7. Adding the Gateway to Another Network(Operator only) To add the gateway to another network, perform the following steps: Step 1 Reference product manual of the gateway in another network, and open the Discovery Mode of the gateway in another network. Step 2 Enable Learn Mode for the gateway. For details, see section " Operation Guide ". After the gateway is connected to the network, the following information is displayed. 8.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition.
Limited Warranty Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge. Special Notice: 1.
