User's Manual

Thank you for choosing the Mobile Broadband USB

Stick. With your USB Stick, you can access a wireless

network at high speed.

Note:

This guide briefly describes the appearance of the USB Stick and the procedures for using

the USB Stick. For details about how to set the management parameters, see help

information on the web management page.

Getting to Know Your USB Stick

The following figure shows the appearance of the USB Stick. It is provided only for your

reference. The actual product may be different.

n USB Connector

It connects the USB Stick to a PC.

o Indicator

It indicates the status of the USB Stick.

z Green, blinking twice every 3s: The USB Stick is powered on.

z Green, blinking once every 3s: The USB Stick is registering with a 2G network.

z Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.

z Green, solid: The USB Stick is connected to a 2G network.

z Blue, solid: The USB Stick is connected to a 3G network.

z Cyan, solid: The USB Stick is connected to a 3G+ network.

z Off: The USB Stick is removed.

p MicroSD Card Slot

It holds a microSD card.

q SIM/USIM Card Slot

It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM)

card.

Getting Your USB Stick Ready

Install the SIM/USIM card

1. Remove the cover of the USB Stick.

2. Insert the USIM/SIM card and the micro SD card into the card slots. Make sure that

the cards are properly inserted.

3. Install the cover of the USB Stick.

Note:

z Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the

SIM/USIM card slot.

z Do not remove the SIM/USIM card when the card is in use. Otherwise, the card as well

as your USB Stick may get damaged and the data stored on the card may be corrupted.

PAGE 1
Thank you for choosing the Mobile Broadband USB Stick. With your USB Stick, you can access a wireless network at high speed. Note: This guide briefly describes the appearance of the USB Stick and the procedures for using the USB Stick. For details about how to set the management parameters, see help information on the web management page. Getting to Know Your USB Stick The following figure shows the appearance of the USB Stick. It is provided only for your reference. The actual product may be different.
PAGE 2
Using Your USB Stick The procedure for installing the management program depends on your computer's operating system. The following sections are based on Windows XP. Connecting to a Network 1. Insert the USB Stick into one of your computer's USB ports. The computer identifies the new hardware and starts its installation automatically. 2. When the installation is complete, the USB Stick's web management page is displayed and the USB Stick connects to the network automatically.