EchoLife HG620 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD.
EchoLife HG620 Home Gateway V100R001 User Guide Issue 01 Date 2009-08-10 Part Number 202179 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: terminal@huawei.
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Contents 1 Safety Precautions..................................................................................... 1 2 Connecting the Cables and Getting Started............................................ 6 2.1 Simple Connection .......................................................................................6 2.2 Connecting One Telephone ..........................................................................7 2.3 Connecting Multiple Telephones ......................................................
6 FAQs......................................................................................................... 15 7 Appendix.................................................................................................. 18 7.1 Indicators....................................................................................................18 7.2 Interfaces and Buttons................................................................................20 7.3 Default Settings.......................................
1 Safety Precautions Thank you for purchasing the EchoLife HG620 Home Gateway (hereinafter referred to as the HG620). For safety purposes, carefully read through these safety precautions and observe them during operation. Basic Requirements z Keep the device dry during storage, transportation, and operation of the device. z Prevent collision of the device with other objects during storage, transportation, and operation of the device. z Do not attempt to dismantle the device.
z Use the accessories such as the power adaptor provided or authorized only by the manufacturer. z Make sure that the device does not get wet. If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device. z The power supply of the device must meet the requirements of the input voltage of the device. z Before plugging or unplugging any cable, shut down the device and disconnect the power supply.
Wireless Product Usage Requirements z Keep the device away from magnetic storage devices (e.g., a magnetic card or a floppy disk), to prevent loss of the stored information. z Stop using the device or disconnect the power supply in situations where wireless device is prohibited or using of a wireless device leads to interference or danger. z The user who uses an electronic assistant medical-treatment device needs to confirm with the service center regarding the effects of the radio wave on this device.
EU Regulatory Conformance Notice This equipment may be operated in all European countries. Safety Precaution The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Hereby, Huawei Technologies Co., Ltd., declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.huaweidevice.com/certification.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
2 Connecting the Cables and Getting Started 2.1 Simple Connection If your telephone line is used for the broadband network access only and if you do not need to use a telephone, take the following figure as a reference for connecting the cables. 1 VDSL LAN4 LAN3 LAN2 LAN1 USB RESET POWER 3 2 1. Telephone jack on the wall 2. Computer 3. Power adapter If the wireless network function is used on the HG620 for the network access, you do not need to connect the cables.
2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. 1 LINE # ### 2 LAN4 LAN3 LAN2 LAN1 USB RESET POWER ## ## ## ## PHONE VDSL MODEM 5 3 4 1. Telephone jack on the wall 2. Splitter 3. Telephone 4. Computer 5.
2.3 Connecting Multiple Telephones If your telephone line is used for the broadband network access, telephone connections, and fax connections, take the following figure as a reference for connecting the cables. 1 LINE # ### 2 VDSL LAN4 LAN3 LAN2 LAN1 USB RESET POWER ## ## ## ## PHONE MODEM 5 3 4 3 7 1 6 8 7 1. Telephone jack on the wall 2. Splitter 3. Telephone 4. Computer 5. Power adapter 6. T connector 7. Microfilter 8. Fax machine 2.
After you power on the HG620, the ADSL indicator blinks (for less than three minutes), which indicates that the HG620 is being activated. Later, the ADSL indicator turns solid on. The POWER indicator is also solid on, which indicates that the HG620 is working properly.
Note： 3. 4. 5. 6. 7. 8. 9. 10. Step 4 z The name of this PVC should begin with atm. z The DSL link type of this ATM PVC should be EoA. Select Enable for WAN connection. Select a service from the Service list drop-down list box. Set Port binding to LAN1 or LAN2. Select Route from the Connection mode drop-down list box. Set Connection type to PPPoE. Enter the user name and password provided by the ISP. Select the authentication mode provided by the ISP. Select a dialing method, and then click Submit.
1. Choose Start > All Programs > Accessories > Communications > Network Connections. 2. Click Create a new connection in Network Tasks to display the New Connection Wizard window, and then click Next. 3. Select Connect to the Internet, and then click Next. 4. Select Set up my connection manually, and then click Next. 5. Select Connect using a broadband connection that requires a user name and password, and then click Next. 6.
3. 4. 5. 6. 7. 8. Step 3 Select the Enable WLAN option. Enter a wireless network name in the SSID text box. Select WPA-PSK from the Security drop-down combo box. Enter an access password in the WPA pre-shared key text box. Select TKIP from the WPA encryption drop-down combo box. Click Submit to save the settings. Configure the wireless network connection on your computer. To configure the wireless network connection, do as follows (taking the Windows XP operating system as an example): 1.
Step 4 Enter the old password and the new password. Then enter the new password again in the Confirm password text box for confirmation. Step 5 Click Submit to save the settings. After you change the password successfully, the current page jumps to the page for logging in to the Web-based configuration utility. To log in to the Web-based configuration utility, enter the new password, and then click Submit.
Step 2 In the navigation tree on the left, choose Basic > LAN. Step 3 Select the WLAN page. Step 4 Enter the new wireless network name in the SSID text box. Step 5 Select WPA-PSK from the Security drop-down combo box. Step 6 Enter the new access password in the WPA pre-shared key text box. Step 7 Select TKIP from the WPA encryption drop-down combo box. Step 8 Click Submit to save the settings. 5.
After the preceding operations, the current page jumps to the login page. You can log in to the Web-based configuration utility by entering the default user name and password that are admin. 6 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over one second, and then release the button to enable or disable the wireless network function. The WLAN indicator shows whether the wireless network function is enabled.
network operator. Step 3 Check whether the LAN indicator of the terminal is on. If the LAN indicator is off, perform further checks as follows: 1. Ensure that the network adapter of the computer is enabled. 2. Ensure that the network cable between the terminal and the computer is properly connected. Remove and then insert the network cable or replace the network cable when necessary. If the LAN indicator is still off, contact an authorized maintenance center.
3. In the Internet Options dialog box, click the Connections tab. 4. In the Local Area Network (LAN) settings group box, click LAN Settings. 5. In the Proxy server group box of the Local Area Network (LAN) Settings dialog box, ensure that the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). check box is cleared. Step 8 Try to access multiple Web sites to check whether the terminal can access these Web sites.
Step 4 Place your terminal and computer in another direction. Step 5 Do not use your terminal to access the WLAN during thunderstorms. After a broadband terminal is installed, does Internet access degrade call quality or do telephone calls lower the Internet access rate? No. The terminal uses the frequency division multiplexing (FDM) and splitter technologies to separate voice signals from data signals.
Indicator Status Description WLAN Blinking z z Solid on z z WPS LAN1–LAN4 USB The wireless network function is enabled. Data is being transmitted through the WLAN. The wireless network function is enabled. No data is being transmitted through the WLAN. Off The wireless network function is disabled. Blinking This indicator has three blinking modes that indicate three states. z The indicator periodically blinks and is on for 0.2s and off for 0.
7.2 Interfaces and Buttons Interface or Button Description VDSL It is used to connect to the MODEM interface on the splitter. LAN1–LAN4 It is used to connect to the Ethernet interface on the computer. USB It is used to connect a USB storage device, such as a USB disk. RESET You can press and hold the RESET button for over six seconds to restore the default settings of the HG620. Note: After you restore the default settings, your customized data is lost. Therefore, use this function with caution.
7.4 Technical Specifications Item Specification Power supply for the HG620 12 V DC, 1.5 A Power consumption < 18 W Ambient temperature for operation 0°C to 40°C Ambient humidity operation 5% to 95%, non-condensing for Dimensions (L × W × H) 190 mm × 151 mm × 57 mm Weight About 320 g Standards VDSL standards z z WLAN standard 21 ITU G.992.3 Annex B ITU G.994.1 802.11b, 802.11g and 802.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.
