User Manual
Table Of Contents
- EchoLife HG531a
- Contents
- 1 Safety Precautions
- 2 Connecting the Cables and Getting Started
- 3 Setting the Network-Access Parameters
- 4 Configuring the Wireless Network Connection
- 5 Configuring the HG531a
- 5.1 Changing the Administrator Password Used for Logging In to the Web-Based Configuration Utility
- 5.2 Enabling or Disabling the Wireless Network Function
- 5.3 Changing the Wireless Network Name and the Access Password
- 5.4 Changing the IP Address Used for Logging In to the Web-Based Configuration Utility
- 5.5 Restoring Default Settings
- 6 FAQs
- 7 Appendix
6
2 Connecting the Cables and Getting
Started
2.1
Simple Connection
If your telephone line is used for the broadband network access only and do not need to
use a telephone, take the following figure as a reference for connecting the cables.
1
2
3
POWER
LAN4
LAN3
LAN2
LAN1
RESET
ADSL
1. Telephone jack on the wall 2. Power adapter 3. Computer
If the wireless network function is used on the HG531a for the network
access, you do not need to connect the cables.