EchoLife HG520c Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD.
EchoLife HG520c Home Gateway V100R001 User Guide Issue 01 Date 2009-04-14 Part Number 103139
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: terminal@huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.
Contents 1 Safety Precautions..................................................................................... 1 2 Connecting the Cables and Getting Started............................................ 4 2.1 Simple Connection .......................................................................................4 2.2 Connecting One Telephone ..........................................................................5 2.3 Connecting Multiple Telephones ......................................................
7.2 Interfaces and Buttons................................................................................15 7.3 Default Settings..........................................................................................15 7.4 Technical Specifications.............................................................................
1 Safety Precautions Thank you for purchasing Echolife HG520c Home Gateway (hereinafter referred to as the HG520c). For safety purposes, carefully read through these safety precautions and observe them during operation. Basic Requirements z Keep the device dry during storage, transportation, and operation of the device. z Prevent collision of the device with other objects during storage, transportation, and operation of the device. z Do not attempt to dismantle the device.
Operation Requirements z Do not allow children to play with the device or accessories.Swallowing the accessories may be fatal. z Use the accessories such as the power adaptor provided or authorized only by the manufacturer. z Make sure that the device does not get wet. If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device. z The power supply of the device must meet the requirements of the input voltage of the device.
Environmental Protection Do not dispose the abandoned device or battery in a garbage can. You need to dispose it according to the local regulations on disposing of device packing materials, exhausted battery and abandoned device, and support the recycling activity. Wireless Product Usage Requirements z Keep the device away from magnetic storage devices (e.g., a magnetic card or a floppy disk), to prevent loss of the stored information.
2 Connecting the Cables and Getting Started 2.1 Simple Connection If your telephone line is used for the broadband network access only and you do not need to use a telephone, take the following figure as a reference for connecting the cables.
2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables.
2.3 Connecting Multiple Telephones If your telephone line is used for the broadband network access, telephone connections, and fax connections, take the following figure as a reference for connecting the cables.
2.4 Getting Started Press the power button on the top of the HG520c to power on the HG520c. After you power on the HG520c, the ADSL indicator blinks (for less than three minutes), indicating that the HG520c is being activated. Later, the ADSL indicator becomes on. The POWER indicator is also on, indicating that the HG520c is working.
5. Enter the operator name, user name, and password in the Login Information dialog box and keep the default settings of other parameters. 6. Click Submit to save the settings. After you complete the preceding settings, you can surf the Internet. You need to perform the preceding operations only once. The next time when you power on the computer, you can surf the Internet without performing any configuration. 3.
You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box. 4 Configuring the Wireless Mode In the wireless mode, the HG520s enables you to access the Internet without connecting a cable. To change the Wireless Mode, do as follows: Step 1 Log in to the Web configuration page. Step 2 Configure the wireless mode.
Step 4 Click Submit. After you change the password successfully, the current page jumps to the page for logging in to the Web configuration page. To log in to the Web configuration page, enter the new password, and then click OK. If you cannot remember the user name and password that have been changed, you can restore the default settings of the HG520c by pressing the RESET button on the panel.
6 FAQs What can I do if I cannot visit Web sites through the terminal? Step 1 Check whether the POWER indicator of the terminal is on. If the POWER indicator is off, perform further checks as follows: 1. Ensure that the power switch of the terminal is turned on. 2. Ensure that electricity comes from the socket and that the input power of the socket meets the requirements described on the label of the terminal power adapter.
of the computer. If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the icon of the network adapter, you can infer that the driver for the network adapter is not properly installed. In this case, re-install the driver for the network adapter of the computer. Step 5 Ensure that you have entered the correct user name and user password that are required by the PPP dialing software. The user name and the user password are provided by your network operator.
For details about how to install a splitter, see the related description in the manual. Step 2 Ensure that telephone lines are properly connected. If the telephone lines are improperly connected, the stability of the network connection is affected. Step 3 Check the positions of your terminal and computer. Ensure that they are far from the electric appliances such as microwave ovens, refrigerators, or cordless telephones that generate strong magnetic or electric fields.
7 Appendix 7.1 Indicators Indicator Status Description POWER On The HG520c is powered on. Off The HG520c is powered off. Blinking The HG520c is being activated. ADSL INTERNET WLAN LAN On The HG520c is activated. Off The HG520c is powered off. On The WAN connection is successfully established (the HG520c has obtained an IP address through IPoE and PPPoE) but no data is being transmitted.
7.2 Interfaces and Buttons Interface/Button Description POWER It is used to connect to the power adapter. LAN It is used to connect to the Ethernet interface on the computer. RESET You can restore the default settings by pressing this button. Note: After you restore the default settings, the customized data will be lost. Therefore, use this function with caution. ADSL It is used to connect to the MODEM interface on the splitter.
Item Specification Weight about 300 g Standards Data transmission WLAN data transmission ADSL standards ITU G.992.1 (G.dmt) Annex A ITU G.994.1 (G.hs) ANSI T1.413 Issue 2 ADSL2 standard ITU G.992.3 (G.dmt.bis) Annex A ADSL2+ standard ITU G.992.5 Annex A WLAN 802.11b, 802.11g G.dmt T1.413 z G.992.5 (ADSL2+) z 802.11b 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, 11 Mbit/s 802.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.
Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: ‧ This device may not cause harmful interference, and ‧ This device must accept any interference received, including interference that may cause undesired operation. ‧ This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
