Contents 1 Safety Precautions ............................................................1 2 Getting Started .................................................................2 Installing the microSD Card and the Battery ............................. 3 Charging the Battery ...............................................................3 Your Phone .............................................................................4 Keys and Functions ................................................................
10 Security ........................................................................15 Keypad Lock .........................................................................15 Phone Lock ...........................................................................16 Master Clear .........................................................................16 Master Reset .........................................................................16 11 TTY Operation .....................................................
1 Safety Precautions Please read the safety precautions carefully to ensure the correct use of your mobile phone. Do not crash, throw, or puncture your mobile phone. Avoid the falling, squeezing, and bending of your mobile phone. Do not use your mobile phone in a moist environment, such as the bathroom. Prevent your mobile phone from being soaked or washed in liquid. Do not switch on your mobile phone when it is prohibited to use phones or when the phone may cause interference or danger.
Do not place your mobile phone or its accessories in containers with a strong electromagnetic field. Do not place magnetic storage media near your mobile phone. Radiation from the phone may erase the information stored on them. Do not put your mobile phone in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your mobile phone and its accessories away from children. Do not allow children to use your mobile phone without guidance.
Installing the microSD Card and the Battery a b Charging the Battery When the battery icon changes to or the charging animation becomes static, the battery is fully charged.
If the battery charge is fully depleted, it may take several minutes for the phone to display the charging icon after the charger is plugged in.
Keys and Functions In this guide, the navigation keys of the phone are indicated by , , and and the right soft key is indicated by No. , . The left soft key is indicated by Press... . To... Dial a number or answer a call. Access Recent Calls in standby mode. Turn the speaker on or off (press and hold the key for about 3 seconds).
No. Press... To... Press the key and another key to enter the upper character on the other key in editing mode. Press the key for consecutive times to switch between text input methods in editing mode. Switch between "abc/en" mode (lower case), "Abc/En" mode (capitalization of the first letter), and "ABC/EN" mode (upper case) in editing mode. Lock the keypad in standby mode (press and hold the key for about 3 seconds). Enter the number 0.
No. Press... To... Access the application assigned to the key in standby mode. To assign the application, select Menu > Settings > Phone > Smart Key. Start a new line in editing mode. Delete characters in editing mode or delete selected items in an application. Go back to the previous screen. Power the phone on or off (press and hold the key for about 3 seconds). End or reject a call. Return to standby mode. Select the option displayed in the lower right corner of the screen.
Screen Icons Screen icons listed in the following table indicate the current status of your phone. They are provided for your reference only. Icon Indicates... Signal strength of the code division multiple access (CDMA) 1X network. Signal strength of 3G mobile network. Airplane Mode activated. Call in progress. Missed call. Music player playing in the background. New text message received. New multimedia message received. A microSD card installed. Location on. Headset connected. Speaker on.
Icon Indicates... Bluetooth on. Ringing mode activated. Ringing and Vibration mode activated. Silence mode activated. Vibration mode activated. Battery level. Battery charging. 3 Call Functions Making a Call 1. In standby mode, press the number keys to enter a phone number. You can also make a call through your call logs and contacts. 2. Press to dial the number. 3. Press to end the call or cancel the dialing. Answering a Call When you receive an incoming call, press to reject it.
except , , and the volume key to answer a call. To set this function, select Menu > Settings > Call > Answer Mode > Any Key. If the Headset Auto-Answer function is enabled and a headset is connected to the phone, the phone will automatically answer incoming calls for a pre-defined period. To set this function, select Menu > Settings > Call > Headset Auto-Answer.
spelt by the keystroke sequence. 2. Press 3. Press or or to scroll to the desired word. to enter the desired word, or to enter the word followed by a space. Entering a Number or a Symbol In number input mode, press the key labeled with the desired number or symbol to enter it. In any text input mode other than the number input mode, press and then press the number or symbol key to enter the desired number or symbol. In any text input mode, press Press or to display the symbol list.
Adding a Group 1. Select Menu > Contacts > Groups > Add Group. 2. Edit the group name. 3. Select Members and press to mark the contacts to be included in the group. 4. Press to save the members. 5. Press to save the group. Assigning Speed Dialing to a Contact 1. Select Menu > Contacts > Options > Manage Contacts > Speed Dialing. 2. Select a number from 2 to 9 and press to confirm. 3. Select a contact from the contact list or enter a number. 4. Press to save the speed dialing number.
System (CMAS) adopted by the FCC. You can customize the types of alerts you wish to receive under the Menu > Messages > Settings > Emergency Alerts. However, Presidential alerts cannot be disabled. 7 Media Applications Taking a Picture 1. Select Menu > Multimedia > Camera or press and hold for about 3 seconds in standby mode. to configure the camera settings. 2. Press Press Press Press 3. Press and to scroll to an item. to select the item. and to change the settings. to take a picture.
about 3 seconds to fast-forward the song. Press to play the previous song. Press and hold for about 3 seconds to rewind the song. Press the volume key to adjust the volume. Press to exit the music player screen and play music in the background. Select Options > Exit to exit the music player. Managing Multimedia Files You can select Menu > My Folder to manage images and audios stored on your phone and microSD card.
Bluetooth headset. 1. Select Menu > Settings > Connectivity > Bluetooth. 2. Select Bluetooth > On to enable the Bluetooth function. 3. Select Search for Devices to search for available Bluetooth devices. 4. Select the Bluetooth device you want to connect from the list and press to pair your phone with the desired device. When you pair your phone with the device for the first time, a password is required. A Bluetooth headset is not included in the product package and must be purchased separately.
Phone > Auto Keypad Lock. Phone Lock The phone lock protects your phone from unauthorized use. By default, the phone lock is disabled. To enable or disable the phone lock, select Menu > Settings > Security > Phone Lock. Once you enable the phone lock, you must enter the password. The default password to unlock your phone is the last four numbers of the MDN (Mobile Directory Number), and it can be changed to any numeric string of four to eight digits in length.
1. Select Menu > Settings > Security > Master Reset. 2. Read the warning and select Yes. 3. Enter your phone lock code. The phone will resets the settings, and then restarts. You can see the section "Phone Lock" to find the default phone lock code, and how to change it. After you reset your phone to its factory settings, the phone lock code will be restore to the defaut one. 11 TTY Operation The Teletypewriter (TTY) is a typewriting device that is used to communicate over a phone network.
2. Make or answer a call. 3. When the call is set up, use the TTY device to send or receive messages. 4. Press to end the call. 12 Troubleshooting If you encounter any problem when using your phone, try to rectify the problem according to the following table. If the problem persists, contact the service provider or the dealer. Problem The battery cannot be charged. Ensure that... The charger is properly connected to your phone and the power socket. The battery power is sufficient.
Problem Ensure that... During a call, the The microphone is not covered. other side cannot If you use a wired headset, make sure connector is fully plugged in. hear your voice. The signal strength is not strong enough or your phone is Move close to a place with strong signal strength. often off line. Your phone or outside your service provider's displays "No network coverage (in a tunnel or service found", surrounded by buildings).
13 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
Areas with flammables and explosives Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security Observe local laws and regulations while using the device.
circuit malfunctions. Do not use your device during thunderstorms to protect your device against any danger caused by lightning. Ideal operating temperatures are 0°C to 35°C. Ideal storage temperatures are –20°C to +70°C. Extreme heat or cold may damage your device or accessories. Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.
Child's safety Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children. The device and its accessories are not intended for use by children. Children should only use the device with adult supervision. Accessories Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
so may lead to short circuits, malfunctions, or electric shocks. If your charger has been exposed to water, other liquids, or excessive moisture, take it to an authorized service center for inspection. Ensure that the charger meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards. Connect the device only to products with the USB-IF logo or with USB-IF compliance program completion.
batteries may also explode. Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire, explosion, or other hazards. Do not allow children or pets to bite or suck the battery. Doing so may result in damage or explosion. Do not smash or pierce the battery, or expose it to high external pressure. Doing so may lead to a short circuit or overheating. Do not drop the device or battery.
Do not expose your device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion. Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion. Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables connected to it.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver.
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated.
some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility.
Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Other trademarks, product, service and company names mentioned may be the property of their respective owners.
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
