Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors.
Huawei Technologies Co., Ltd. reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. Contents 1 Introduction .............................................................. 1 NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
5 Messaging................................................................ 17 6 Contacts................................................................... 19 1 7 Camera .................................................................... 21 Taking a Picture ....................................................... 21 Recording a Video Clip ............................................. 22 8 Media Player ............................................................ 23 Creating a New Playlist.................
If your phone supports two SIM cards, you can insert two SIM cards into the phone at one time, and select Menu > Settings > Dual SIM settings > Dual SIM open to enable the dual-SIM mode. Charging the Battery You can use the lithium battery of the mobile phone immediately after unpacking. A new battery performs best after it is fully charged and discharged three times. microSD Card Your phone supports a microSD card with a capacity of up to 4 GB.
Keys and Functions Your Phone The following figure shows the appearance of your phone and it is provided only for your reference. Press… To… z z z z z z z z z z Make a call, or answer an incoming call. View call logs in standby mode. Power on or power off the phone (by pressing and holding it for about three seconds). End a call, or reject an incoming call. Lock keys and the screen in standby mode. Return to the standby mode. Display the main menu in standby mode. Confirm a selection.
Calibrating the Screen Using the Function Menu The phone can respond to the touch on the screen accurately after screen calibration. In standby mode, tap Tap in standby mode, and then select Settings > Pen calibration. Tap the cross marks that appear on the screen in sequence according to the prompts that are displayed to complete adjusting the phone display. When calibrating the screen, tap the cross marks exactly. Then you can get the precision of responses to taps and handwriting input.
2 > Change password > Phone password to change the phone code into any numeric string of four to eight digits. Getting Started Do remember your phone code. If you forget the phone code, contact the service center. Powering On or Off the Phone PIN and PUK To switch on your phone, press and hold for about three seconds. If a prompt is displayed, enter your phone password or personal identification number (PIN). The PIN is delivered with the SIM card.
z Calendar: to view dates and set events. z Task: to view and set tasks. z World clock: to view and set the world clock. z Alarm: to set alarms. z Java: to download and install java applications and games. 3 Voice Services On-screen Numeric Keypad In standby mode, tap keypad. to access the on-screen numeric 1 2 7 3 6 4 5 1 Number keys. To enter phone numbers. z To call the voicemail by tapping and holding the 1 key for about three seconds.
Making a Call Answering a Call 1. Tap When there is an incoming call, you can do as follows: in standby mode. 2. Enter the phone number. z z To make an international call, tap twice consecutively to enter the international call prefix (+). Then enter the country or region code, area code, and phone number in sequence. To call an extension, enter the phone number, tap three times consecutively to enter P or four times consecutively to enter W, and then enter the extension number. 3. Press or tap 4.
4 Text Entry Enter Letters Text Entry Screen 1 2 3 4 5 6 7 8 9 10 If the T9 mode is enabled, tap each key once according to the spelling sequence of the desired words. The phone displays all the commonly used words according to the numeric sequence of key presses. Tap the desired word to enter it. 1 13 2 12 3 11 4 10 5 9 6 7 If the T9 mode is disabled, tap the key including the desired letter once to enter the first letter on the key, twice to enter the second letter on the key, and so on.
8 To clear the character on the left of the cursor. Tap and hold the key for about three seconds to clear all the characters. 5 Messaging Tap in standby mode, and then select Messaging > Write message. to and recipient(s). You can enter the phone number Tap or select the recipient from Contacts. Tap to send the message. If you want to create a multimedia message, tap to add pictures, video clips, audio clips, attachments, or text template and so on.
z z z Before creating and sending multimedia messages, contact your service provider for the availability of the Multimedia Messaging Service (MMS) and the method of subscribing to the services. Open multimedia messages with caution. Multimedia messages may contain objects that can damage your phone, such as malicious software. If your phone supports two SIM cards and if the dual-SIM mode is enabled, select the SIM card you want to use according to the prompt displayed on the screen.
Searching for a Contact 7 Enter the contact name or the first consecutive letters of the name, and then select the contact from the list. Setting the Preferred Storage Tap , and then select Phonebook settings > Preferred storage to select the storage that you want to use. Camera Taking a Picture Tap Speed dial in standby mode, and then select Camera. 9 1 Use speed dial to make a call quickly by tapping and holding an on-screen numeric key for about three seconds.
Recording a Video Clip Tap 8 in standby mode, and then select Video camera. 1 2 Tap Media Player in standby mode, and then select Media player. Creating a New Playlist 7 1. Tap in standby mode, and then select Media player > My playlists. 2. Tap 6 3. Edit the playlist name. 4. Tap 3 1 2 3 4 5 6 7 4 , and then select New. , and then select Done. 5. Tap the playlist to display it. 5 To adjust the focus. To adjust the brightness. To set the video quality. To enable or disable the night mode.
14 To indicate the name of the current media file. Media Player 1 14 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 13 12 9 10 11 To indicate the number of the current media file and total number of the media files in the playlist. To indicate the artist To indicate the album To indicate the played duration and playing progress of the current media file. To play media files randomly. : To play a media file repeatedly. z : To play media files in the current playlist circularly. To pause or continue.
8 9 FM Radio Before using the FM radio, connect a compatible headset to your phone. The headset cable also functions as an antenna. To ensure good reception of radio programs and superior audio quality, do not disconnect the headset from your phone or bend the headset cable with force. When listening to the FM radio, press the volume. in standby mode, and then select FM radio.
Setting the Connection Profile To access WAP sites on your phone, you need to set your account information first. The account information is provided by your service provider. 1. Tap in standby mode, and then select WAP > Internet service > Settings > Profiles. 2. Select your service provider. If your service provider is not in the list, tap Add new to add it. 3. Tap the profile to activate it.
3. Tap the required device to pair. When a device is found for the first time, a password is required for authentication. Using a Bluetooth Headset After a Bluetooth headset is paired with and connected to the phone, the headset icon is displayed on the standby screen. Then, you can use the headset for communication. 1. Enable the Bluetooth function. 12 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device.
stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked.
Safety of Children z Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. z Accessories Use the accessories delivered only by the manufacturer.
z z z z When the temperature is lower than 0°C, performance of the battery is affected. Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the device. Before you clean or maintain the device, power off the device and disconnect it from the charger. Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device and the charger.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.
EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site www.huaweidevice.com/certification. Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all countries of European Union. Version: V100R001_01 40 NO.
