User's Manual

33
designed to ensure safety for all users, regardless of age and
health.
The Specific Absorption Rate (SAR) is the unit of measurement
for the amount of radio frequency energy absorbed by the
body when using a device. The SAR value is determined at the
highest certified power level in laboratory conditions, but the
actual SAR level of the device when being operated can be well
below the value. This is because the device is designed to use
the minimum power required to reach the network.
The SAR limit adopted by USA and Canada is 1.6
watts/kilogram (W/kg) averaged over one gram of tissue. The
highest SAR value reported to the Federal Communications
Commission (FCC) and the Industry Canada (IC) for this device
type when it is tested for use at the ear is 1.340 W/kg, and that
when it is properly worn on the body is 1.
320 W/kg.
The SAR limit also adopted by Europe is **W/kg averaged over
10 grams of tissue. The highest SAR value for this device type
when tested at the ear is** W/kg, and when properly worn on
the body is ** W/kg.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate RF
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. There is, however, no guarantee that
interference will not occur in a particular installation.If this