G3500 GSM Mobile Phone User Guide Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: mobile@huawei.com Website: www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Text Entry .................................................................. 7 Changing the Text Input Modes .................................. 7 Entering English Letters ............................................. 8 Entering Digits........................................................... 8 Entering Symbols....................................................... 8 5 Messaging.................................................................. 9 Editing and Sending a Text Message.........................
1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and it is for your reference only.
Keys and Functions Press … To … Make a call. Answer an incoming call. View All Calls in standby mode. Power on or power off the phone (by pressing and holding it for about 3s). End a call, or reject an incoming call. Return to standby mode. Display Menu in standby mode. Select the highlighted item. Display Contacts in standby mode. Return to the previous menu. Display Menu in standby mode. Confirm a selection. Access: Profiles ( Write message ( ), Inbox ( ), and Camera ( standby mode.
Press … - To … Enter numbers, letters, and characters. Call the voice mail center in standby mode (by pressing and holding the 1 key). Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys). Select a submenu item labeled with the corresponding number. In standby mode, press the key once to enter *, twice to enter +, and three times to enter P, and four times to enter w. Enable or disable the Meeting profile (by pressing and holding the key for about 3s in standby mode).
Screen Icons Icon Indicates Signal strength. A new text message is received. The phone is roaming. The call forwarding function is enabled. The stopwatch function is enabled. The headset is being used. Missed call(s). An alarm is activated. The keypad is locked. Battery power level. The General profile is activated. The Meeting profile is activated. The Outdoor profile is activated. The Mute profile is activated.
2 Getting Started Installing the SIM Card and Battery Ensure that the golden contact area on the SIM card is facing downward, and the beveled corner is properly aligned with the SIM card slot.
Removing the Battery and SIM Card 3
Installing the micro SD card Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displayed in animation. When the charging icon becomes static, the battery is fully charged. 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket. Using the Function Menu 1. In standby mode, press 2. Press (Menu) or .
3. Press (Select) or to display the selected menu. 4. Press 5. Press to select a submenu. (Select) or to display the menu. 6. Press (Back) to return to the previous menu or exit the function menu. To return to standby mode, press . Phone Lock The phone lock protects your phone from unauthorized use. By default, the phone lock function is disabled. You can change the default phone lock code (1234) into any numeric string in the range of four to eight digits. Do remember your phone lock code.
Locking the Keypad Press and hold press to lock the keypad. To unlock the keypad, (Unlock) and in succession. If the Auto keypad lock function is enabled and the phone is idle for a preset period in standby mode, the keypad is locked automatically. When the keypad is locked, you can press to answer an incoming call or make emergency calls. 3 Voice Services Making a Call 1. In standby mode, enter the phone number. To make an international call, press twice consecutively to enter the plus sign (+).
Answering a Call When there is an incoming call, you can do as follows: Press to answer it. Press to reject it. Press (Mute) to mute the speaker, and then press (Reject) again to reject it. Press (Options) and select Answer to answer it. If the Any key function is enabled, you can press any key except and to answer an incoming call. 4 Text Entry Changing the Text Input Modes The indicator of the current text input mode is displayed on the upper left corner of the screen.
Entering English Letters In "ABC" or "abc" input mode, you can press a key labeled with the desired letter once to enter the first letter on the key, twice to enter the second letter on the key, and so on. In "eZi ABC", "eZi Abc" or "eZi abc" input mode, do as follows to enter a word: 1. Press each key only once according to the spelling sequence of the desired word. The phone displays the commonly used word according to the numeric sequence of key presses. 2. Press 3.
5 Messaging Editing and Sending a Text Message 1. Select Menu > Messages > SMS > Write message. 2. Edit the text message. 3. Press (Options) and select Done. 4. Press (Select) to select from the following options: Send only: to enter the phone number or select the recipient from the contact list. Save and send: to add the recipient and set to save the message after sending it. Save: to save the message into the Drafts. Send to many: to add up to 10 recipients at a time.
5. Press 6. Press (Options) and select Done. （Done）and select Send. Contact your service provider for the availability of the Multimedia Messaging Service (MMS) and how to subscribe this service. Open multimedia messages with caution. Objects in multimedia messages may contain hazards that can damage your phone, such as malicious software. 6 Contacts Creating a Contact 1. Select Menu > Phonebook > Add new contact. 2. Select To SIM or To phone for saving the contact. 3. Press to edit the contact. 4.
11
7 Multimedia Camera 1. Press in standby mode, or select Menu > Multimedia > Camera. 2. Press (Options), and then select to view the photo album or set relevant parameters. 3. Press or to take a photo. 4. Press (Continue) to save the photo; press (Delete) to delete the photo. Video Recorder 1. Select Menu > Multimedia > Video recorder. 2. Press 3. Press (Options) to set relevant parameters. or to start/stop recording a video. Video Player 1. Select Menu > Multimedia > Video player. 2.
Audio player 1. Select Menu > Multimedia > Audio player. 2. Select audio file. 3. Press (Options) and select Play. You can do as follows when the audio is being played: Press and Press to adjust the volume. or 4. Press to pause/continue. (Stop) to stop playing the audio. FM Radio The headset cable can be used as an antenna. To ensure good reception of radio programs, do not disconnect the headset from the phone or bend the headset cable extremely. 1. Connect a compatible headset to the phone. 2.
Press (Options) and select Channel list, Manual input, Preset auto search, settings, Record, Append or File list. Sound Recorder 1. Select Menu > Multimedia > Sound recorder. 2. Press (Options) and select Record. During the recording process, press pause/continue. 3. Press (Stop) to stop recording.
8 Connectivity You can access WAP sites and use WAP-based services on your phone. To access the WAP sites through your phone, you need to subscribe the corresponding service from the service provider and set the relevant parameters on your phone. For details about the service and the charges, contact your service provider. Setting the Connection Profile To access the WAP sites on your phone, you need to set your account information first. The account information is provided by your service provider. 1.
4. Press (Options) and select Done. The browser will display the corresponding WAP page.
9 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the mobile safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when it causes danger or interference with electronic devices.
stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. Also, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmosphere that are often, but not always, clearly marked.
Operating Environment Do not use or charge the device in dusty, damp or dirty places or places with magnetic fields. Otherwise, the circuit may not function properly. The device complies with the RF specifications when the device is used near your ear or at[0] a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
your ears like ringing or if you hear muffled speech, get your hearing checked. If you continue to use high volume, your hearing will soon get affected. Hearing experts offer the following suggestions to protect your hearing: Reduce the time you use the receiver, earbuds, headphones, speakerphone, or earpieces at high volume. Do not increase the volume to block noisy surroundings. Reduce the volume if you can’t hear people speaking near you.
Battery and Charger The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and talk time are shorter than normal, replace the battery. Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause fire or the charger may not function properly. Do not connect two poles of the battery with conductors such as metal materials, keys or jewelries.
Clearing and Maintenance The device, battery, and charger are not water-resistant Keep them dry. Protect the device, battery and charger from water or vapor. Do not touch the device and charger with a wet hand. Otherwise, it may lead to short-circuit or malfunction of the device and electric shock to the user. Do not place your device, battery, or charger in places where it can get damaged because of collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or explosion.
Do not dismantle the device or accessories. Otherwise, manufacturer is not liable to pay for damages as the device and accessories are not covered by warranty. Emergency Call You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications. Certification Information (SAR) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD.
below the value. This is because the device is designed to use the minimum power required to reach the network. Before a device model is available for sale to the public, it must be tested and certified by the Federal Communications Commission (FCC), ensuring that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model.
interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The operation is subject to the condition that this device does not cause harmful interface. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF exposure warning: The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. Max. SAR Measurement: Head SAR: 1.220 W/kg Body SAR: 1.
Version: V100R001_01 27 NO.
