G2 8 0 2 GSM M obile Ph on e Use r Gu ide
Copyright © Huawei Technologies Co., Lt d. 2012. All right s reserv ed. Tradem arks and Perm issions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
Features marked with "optional" are optional. These features may vary according to service providers. For details, contact your service provider. 1 Get t ing t o Know Your Phone Your Phone The following figure shows the appearance of your phone and is provided for your reference only.
1 2 3 4 5 6 Earpiece Charger/Headset Screen Navigation keys Left soft key Call/Answer key 7 8 9 10 11 12 Microphone Torch Number keys End/Power key Right soft key Confirm key Keys and Functions Press … To … z z z z z z Make a call. Answer an incoming call. View call logs in standby mode. Power the phone on or off (press and hold the key for about 3 seconds). End or reject a call. Return to standby mode. Select the option displayed in the lower left corner of the screen.
Press … To … z Access the functions assigned to the navigation keys in standby mode. z Customize the functions assigned to the navigation keys, select Menu > Settings > Phone settings > Direction key setup. z z – z Enter numbers, letters, and symbols. Call voicemail in standby mode (press and hold the 1 key for about 3 seconds). Speed-dial phone numbers in standby mode (press and hold the 2–9 keys for about 3 seconds). z Select an option labeled with the corresponding number.
Screen Icons I con I ndicat es … Signal strength. General Packet Radio Service (GPRS) signal. The alert type is Ring only. The alert type is Vib. only. The alert type is Vib. and ring. The alert type is Vib. then ring The alert type is Silence. The earphone is plugged (Optional). Missed calls. Call forwarding enabled. New text messages. New multimedia messages. Alarms activated. Keypad locked. Battery level.
2 Get t ing St art ed Installing the SIM Card and the Battery When installing a SIM card, ensure that the gold contact area faces down, and that the beveled edge of the SIM card aligns with that of the SIM card slot. Before removing the battery and the SIM card, ensure that your phone is powered off.
Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the phone's charger jack. 3. Wait until the battery is fully charged. While the battery is charging, the charging icon blinks. When the charging icon stops blinking, the battery is fully charged. When you charge a completely exhausted battery, the charging icon may appear several minutes later. 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket.
If you enter the incorrect PUK a specified number of times, the SIM card will become permanently invalid. If this occurs, contact your service provider for a new SIM card. Locking and Unlocking the Keypad To lock the keypad, press and hold for about 3 seconds in standby mode. To unlock the keypad, press (Unlock) then in quick succession. If the Auto keypad lock function is enabled, the phone will lock the keypad automatically after being idle in standby mode for a pre-defined period.
z To call an extension, enter the phone number, press three times to enter P, and enter the extension number. 2. Press to dial the number. 3. Press to end the call. z You can also make a call from call logs, contacts, and messages. z During a call, you can press adjust the in-call volume. or to Answering a Call When there is an incoming call: z Press to answer the call. z Press to reject the call. z Press (Mute) to mute the speaker, and then press (Reject) to reject the call.
4 Text I nput Changing the Text Input Mode The current text input mode indicator is displayed in the upper to switch between text left corner of the screen. Press input modes.
z Press (Clear) once to delete the last character entered. Press and hold (Clear) for about 3 seconds to delete all the characters. z z to display the In any input mode, press commonly used symbol list. In any input mode (except the "123" input mode), press to enter a space. In Multi-tap input mode, press twice to enter 0. Entering a Letter In multi-tap input mode, press the key labeled with the desired letter once to enter the first letter on the key, twice to enter the second letter, and so on.
Entering a Digit In number input mode, simply press the number key labeled with the desired digit. Entering a Symbol 1. Press 2. Press 3. Press to display the symbol list. to scroll to the desired symbol. to enter the desired symbol. 5 Messages Sending a Text Message 1. Select Menu > Messages > Write message > SMS. 2. Write the message. and enter the recipient's phone number or add a recipient from Contacts. 3. Press 4. Press send the message.
Sending a Multimedia Message z Contact your service provider to determine the availability of the Multimedia Messaging Service (MMS) and how to subscribe to the service. z Open multimedia messages with caution. Objects in multimedia messages may contain viruses and malicious software that can damage your phone. 1. Select Menu > Messages > Write message > MMS. 2. Edit the message. You can add pictures, audio clips, and attachments to the message.
4. Press to save the contact. Searching for a Contact 1. Select Menu > Contacts. 2. Enter the first letter of the contact name in the search bar. Contacts who have names that start with this letter will be displayed. 7 Mult im edia Image Album (Menu), and then select Multimedia > Image Album to launch the Image album. 1. Press 2. Press to view image. (Options) for other options, including View, Image information, Browse style, Send, Use as, Rename, Delete, Sort by, Delete all, and Storage. 3.
3. Press to play the audio clip. When the audio clip is being played: z Press z Press z to pause or continue. or Press and hold or fast-forward the clip. to adjust the volume. for about 3 seconds to rewind or Video Player 1. Select Menu > Multimedia > Video Player. 2. Select a video clip. 3. Press to play the video clip. When the video clip is being played: z Press z Press z to pause or continue. or Press and hold or fast-forward the clip. to adjust the volume.
FM Radio (Optional) (如果手机没有内置天线，请使用这段文字) Connect the headset to the phone before you attempt to listen to an FM radio station. The headset cable also functions as the radio’s antenna when it is turned on. To ensure the best possible reception and therefore audio quality, do not unplug the headset or severely bend or twist the headset cable. (如果手机有内置天线，请使用这段文字) Your phone comes with a built-in FM radio antenna. You can listen to the FM radio without a headset. 1.
2. Press and select New record. 3. While recording, you can press to pause or continue. 4. Press (Stop) to stop recording. 8 WAP You can use your phone to access Wireless Application Protocol (WAP) sites and use WAP-based services. To browse WAP pages, you must subscribe to the corresponding service from your service provider and configure your phone's relevant settings. For details about services and charges, contact your service provider.
Set t ing t he WAP (Menu), and then select Network Services > WAP > Settings > Data account. 1. Press 2. Select your service provider, and then press (OK). Connecting to a Network 1. Select Menu > Network Services > WAP. 2. Select Homepage, Bookmarks, Enter address, Recent pages or Settings. 3. Press 9 to access the website. Warnings and Precaut ions This section contains important information pertaining to the operating instructions of your device.
Medical Dev ice z Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited. z Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If you are using a pacemaker, use the device on the opposite side of the pacemaker and do not carry the device in your front pocket.
gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Securit y Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines: z Concentrate on driving. Your first responsibility is to drive safely. z Do not talk on the device while driving. Use hands-free accessories.
z The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned. z On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning.
be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger. Bat t ery and Charger z Unplug the charger from the electrical plug and the device when not in use.
touches your skin or splashes into your eyes, wash your eyes with clean water immediately and consult a doctor. z If there is a case of battery deformation, color change, or abnormal heating while you charge or store the battery, remove the battery immediately and stop using it. Otherwise, it may lead to battery leakage, overheating, explosion, or fire. z If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once.
z Do not place magnetic storage media such as magnetic cards and floppy disks near the device. Radiation from the device may erase the information stored on them. z Do not leave your device, battery, and charger in a place with an extreme high or low temperature. Otherwise, they may not function properly and may lead to a fire or an explosion. When the temperature is lower than 0°C, performance of the battery is affected. z Do not place sharp metal objects such as pins near the earpiece.
Cert ificat ion I nform at ion ( SAR) This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 22 interference to radio communications.
EU Regulat ory Conform ance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site www.huaweidevice.com/certification. 0700 Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU). Please visit www.huaweidevice.
