G2200C GSM Mobile Phone User Guide Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: mobile@huawei.com Website: www.huawei.
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO.
Table of Contents 1 Getting to Know Your Phone .................................................... 1 Your Phone ..........................................................................1 SIM Card..............................................................................2 Charging the Battery ............................................................2 Keys.....................................................................................3 Screen Icons.................................................
1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and it is for your reference only.
SIM Card Insert your SIM card before using your phone. Remove the SIM card and the battery only after powering off your phone. The following figures show the installation of the SIM card. 1. Insert the SIM card. 3. Install the battery cover. 2. Insert the battery. Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displaying in animation.
Keys z z In this manual, the navigation keys of your phone are indicated by the follow icons: , , , . To customize the four navigation keys as the shortcuts to different functions, select Menu > Settings > Shortcut Settings. Press ... z z z To … Make a call. Answer an incoming call. View call logs in standby mode. Power on or off the phone (by pressing and holding the key for about 5s). z End or reject a call. z Return to the standby mode.
Press ... z z – z z z z z To … Enter digits, letters, and symbols. Call the voice mail center in standby mode (by pressing the 1 key for about 3s). Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys for about 3s). In standby mode, press the key once to enter *, twice to enter +, and three times to enter P. Enable or disable Meeting profile in standby mode (by pressing and holding the key for about 3s). Enter #.
Icon Indicates … The Outdoor profile is activated. The Meeting profile is activated. The My Profile is activated. The headset is plugged. Unread voice message(s). Unread text message(s). The SMS memory is full when the icon is red. Unread multimedia message(s). Unread push message(s). The call forwarding function is enabled. Ongoing call. 2 Getting Started Phone Lock The phone lock protects your phone from unauthorized use. By default, the phone lock function is disabled.
PIN and PUK The personal identification number (PIN) protects your SIM card from unauthorized use. The PIN unblocking key (PUK) can unlock the blocked PIN. Both PIN and PUK are delivered with the SIM card. For details, consult your service provider. If you enter wrong PINs for a specified number of times consecutively, the phone asks you to enter the PUK. If you enter wrong PUKs for a specified number of times consecutively, the SIM card is invalidated permanently.
3 Call Functions Making a Call 1. In standby mode, enter the phone number. z To make an international call, press twice consecutively to enter the international long distance code. Then enter the country code or region code, area code, and phone number in sequence. To call an extension, enter the phone number, press twice consecutively to insert P, and then enter the extension number. 2. Press to dial the number. z 3. Press z z to end the call.
4 Text Entry Changing the Text Input Mode The indicator of the current text input mode is displayed on the upper left corner of the screen. You can press input mode. Icon Eng Indicates … Predictive input mode Abc, abc, and ABC Multi-tap input mode 123 Digit input mode z Press (Delete) once to delete the character on the left of the cursor. Press and hold about 3s to clear all the characters.
Predictive Input Mode In predictive input mode, do as follows to enter a word: 1. Press each key only once according to the spelling sequence of the desired word. The phone displays the commonly used word according to the numeric sequence of key presses. 2. Press or 3. Press to scroll to the desired word. to enter the word. Entering a Digit z z In "123" input mode, press the number keys labeled with the desired digits.
4. Add recipient(s). You can enter the phone number, or select the recipient from the Contacts. 5. Press to send the message. Writing and Sending a Multimedia Message The Multimedia Messaging Service (MMS) is network dependent. To use this service, you need to contact your network service provider, subscribe to the GPRS service, and obtain the settings such as the Wireless Application Protocol (WAP) gateway and the number of the MMS service center. 1. Select Menu > Message > MMS > New MMS. 2.
1. Insert the headset to the headset jack properly. 2. Choose Menu > FM Radio to activate the FM radio. After loading, the phone plays a program. 3. On the FM Radio screen, you can do as follows: z Press , or the control key on the headset cable to change channels. z Press z Press (Options) to tune off the FM radio, enable or disable the loudspeaker, view the channel list, tune, delete channels, or rename current channel. or to adjust the volume.
7 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
z z z z z z Do not use or charge the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in a malfunction of the circuit. The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger. Battery and Charger z z z z z z z z Unplug the charger from the electrical plug and the device when not in use. The battery can be charged and discharged hundreds of times before it eventually wears out.
z Do not dispose of batteries in fire as they may explode. Batteries may also explode if damaged. Cleaning and Maintenance z z z z z z z z The device, battery, and charger are not water-resistant. Keep them dry. Protect the device, battery, and charger from water or vapor. Do not touch the device or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user.
Emergency Call You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications. Certification Information (SAR) This mobile device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the mobile device is designed not to exceed the limits for exposure to radio waves.
FCC Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) his device must accept any interference received, including interference that may cause undesired operation.