Wonderful Communication, Mobile Life. Thank you for choosing HUAWEI FT3310 Fixed Wireless Terminal.
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Table of Contents 1 Warnings and Precautions .....................................................................................................1 2 Introduction ...........................................................................................................................4 Packing List ...................................................................................................................4 Appearance of the FWT ........................................................................
1 Warnings and Precautions Basic Cautions According to the packing list, check items in the package box to make sure that they are complete and undamaged. Before installing and using the FWT, read the user guide carefully. Electronic Device Power off your FWT near high-precision electronic devices. The FWT may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices.
y Before cleaning the FWT, turn off the FWT. Then disconnect the power supply and take out the battery. Before moving the FWT, disconnect the power supply. y Do not subject your FWT, battery, and power adapter to serious collision or shock. Otherwise, battery leakage, FWT malfunction, overheating, fire, or explosion may result. y Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you use the FWT.
y Do not connect two poles of the battery with metallic materials, such as cables. y Do not disassemble the battery or solder the battery poles. Otherwise fluid leakage, overheating, fire, or explosion may result. y If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion. y Disconnect the power adapter and take out the battery when the FWT is not used for a long time.
y This device complies with Part 15 of the FCC Rules .Operation is subject to the following two conditions: y (1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. y 15.21 y NOTICE: y Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. y 15.
y y y y y Main unit Power adapter Battery Certificate of Quality User Guide Appearance of the FWT Note: The figures are only for your reference, please refer color and shape to product. Front View 7 6 8 9 10 1 2 3 4 5 No. Item 1 FWT switch 2 Telephone port 1 3 Telephone port 2 4 USB port 5 DC input 6 Operating status indicator Slow blinking in blue: The FWT is in work normally.
No. Item Power indicator 7 In blue: The FWT is connected with the power adapter. Battery indicator 8 In red: The battery is fully electricity or fully charged. Fast blinking in red: The battery needs to be recharged. Slow blinking in red: The battery is being charged. IN USE indicator 9 In blue: The handset of the telephone is picked up. 10 Signal indicator In blue: The signal can be received.
No.
3 Installation Note: Before installing or removing the battery, antenna, or SIM card, you need to swich off the FWT and disconnect the FWT from the power adapter. Installing the SIM Card Note: y Consult the local agent to determine whether to install the SIM card or not. y The SIM card and contact point are vulnerable to damage such as scarring or bending, so you need to insert or remove it with care. Insert the card into the card slot.
Insert the connection cable of the battery into the battery port (make sure the battery is correctly inserted), and then seat the battery in the battery container. Installing the Power Adapter In normal conditions, the FWT relies on the external power adapter for power supply. 1. 2. Insert one end of the power adapter into the DC input port, and the other end into the power supply jack. If the power indicator is in blue, the connection is correct.
Placing the FWT Horizontal Mounting Place the FWT on a smooth surface with cool air and good ventilation. Keep the FWT away from other objects around for at least 10 cm. Vertical Mounting Fix wall screws into the wall with the screw heads extending approximately 3 mm from the surface of the wall, align the mounting brackets with the screws, push the host towards the wall, and mate the brackets with the screws, ensuring the host is stable.
4 Basic Operations Booting the FWT Press and hole the FWT switch to switch on/off the FWT. The boot process of the FWT will last about 20 seconds. Then you can view the signal indicator . Note: If the signal indicator remains off, the FWT may be faulty or not in coverage area. Please consult the local agent. Making or Answering Calls 1. Before off-hook, make sure the signal indicator is on. 2.
4. After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level. Note: If you hear the reject tone of "toot, toot", you have pressed an incorrect key. The syetem will return to the off-hook state, and you can retry to make the setting after hearing the dial tone again. Adjusting the Volume During a Call 1. 2. 3. 4. If you are in a session with the remote party, you can press ##1 to adjust the volume.
5 Troubleshooting The FWT is not connected to a power adapter. The switch of the FWT is switched on, but the battery indicator is still off. Check whether the battery is installed. If the battery is installed, the problem may result from low power supply of the battery. Please charge the battery. Connect the power adapter to the FWT, but the power indicator remains off. Check whether the output voltage of the power adapter meet the requirement of the FWT.
