HUAWEI FP2025/2225 Fixed Wireless Terminal USER GUIDE
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Your Fixed Wireless Terminal 1 2 3 4 5 6 7 10 9 8 Note: The figures of the FWT (Fixed Wireless Terminal) are only for your reference, please refer color and shape to product. No. Item Description 1 Left soft key Select the option displayed on the lower left corner of the screen. 2 Scroll keys Access the shortcut screen in standby mode. Adjust the microphone and the earpiece volume during a call. 3 Right soft key Select the option displayed on the lower right corner of the screen.
No. Item 8 # key 9 * key Description Lock the keypad in standby mode (by pressing and holding it). Switch between different input modes in editing mode. Activate/deactivate the quiet profile in standby mode (by pressing and holding it). Access the symbol screen in editing mode. 10 Number keys from 0 to 9: Enter numbers and characters. Number keys Number keys from 1 to 9: Press and hold a key to speed dial a phone number in standby mode.
Settings 1. 2. 3. 4. FM Radio (Optional) Display Call Settings Phone Settings Security Installing the UIM Card (Optional) Consult the service provider whether the UIM card is needed. Power off the FWT and remove the power supply cable, and install the UIM card as shown. Make sure that the golden contact on the UIM card is facing downwards. Installing the Battery Power off the FWT and remove the power supply cable, and install the battery as shown.
In normal conditions, the FWT depends on the power adapter for power supply and will use the battery only in the case that the electricity has failed and the power adapter is unavailable. As the battery can supply power only for a limited period, you must make sure that the battery has been fully charged before putting it into use. Using the Menu 1. 2. 3. 4. In standby mode, press Press to display the main menu. / Press to select a menu item. to display submenu.
3. Press to select Send or Send&Save. 4. Insert recipients. Do the following: Enter the phone number directly. Insert a contact from the phone book. Insert group. 5. Press to send a message. Viewing a Message The inbox stores received messages. 1. 2. 3. Select Menu > Messages > Inbox. Press to view the message. 4. Press message. to reply, delete, or forward a short message, or call or save the phone number of a Press / to scroll the messages.
Entering Numbers In the "123" input mode, press a key labeled with the desired number. Entering Symbols 1. 2. 3. In any input mode, press the * key to display a symbol list. Press / to scroll up or down the symbol list. Press the corresponding number key to enter the symbol. Using the Voice Caller ID Function (Optional) You can use the Voice Caller ID function so that you can hear a voice caller ID when there is an incoming call. 1. Select Menu > Settings > Call Settings > Voice Caller ID. 2.
can change it into any numeric string of 4 to 8 digits. When the FWT is locked, enter the lock code to unlock the FWT first; otherwise, you can only make emergency calls or answer calls. PIN and PUK (Optional) The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unblocking key (PUK) can unblock the blocked PIN. If you enter wrong PIN codes for multiple times, your UIM card is locked. In this case, you need to enter the PUK code to unlock the UIM card.
used in their vicinity. Traffic Security Do not use your device while driving, and observe the local laws and regulations. Do not use your device while flying in an aircraft. Power off your device before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal.
Cleaning and Maintenance The device, battery, and charger are not water-resistant. Keep them dry. Protect the device, battery, and charger from water or vapor. Do not touch the device or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where they can get damaged because of collision.
