F362 Cordless Phone User Guide
1 Getting to know your F362 8 1 2 7 3 6 5 4 The figures in this guide are provided for your reference only.
2 Keys Number and symbol keys Access the main menu in standby mode. Select the option displayed in the lower left corner of the screen. Make or answer a call. View the dialed calls in standby mode. Enter numbers, letters and symbols. Call voicemail in standby mode (by pressing and holding the 1 key). Number keys 2~9：Speed-dial a user-assigned phone number by pressing and holding a key in standby mode. Press # key to switch between text input methods in editing mode.
Access the main menu by pressing the OK key in standby mode. Access a shortcut menu by pressing the corresponding navigation key in standby mode. Adjust the volume by pressing the navigation keys during a call. 3 Screen icons Full reception Full battery Alarm clock Unread message Silent profile activated 4 Installation Ensure that F362 is powered off and disconnected from the power adapter.
Do not frequently remove the SIM card when using F362. Installing the battery Ensure that the battery is correctly installed.
When new phones are delivered, the battery power is low. Therefore, charge the phone for a while and then power on the phone the first time you use it. If the phone will not be used for a long time, remove the battery from the phone. Charging the battery Method 1: Method 2: If the battery has not been used for a long time or the battery is exhausted, the screen of the phone may not function when you charge the battery again. This is normal.
6 Calling Making a call 1. In standby mode, press the number keys to enter a phone number. 2. Press to dial the number. 3. Press to end the call or cancel the dialing. You can also use the following methods to dial the number: In standby mode, press to view the dialed calls. Find the desired number in the dialed calls, and then press the number. to dial Find the desired number in the contacts, and then press to dial the number.
7 Messages Sending a message 1. Select Message > Write message. 2. Write the message. 3. Press and then add a recipient using the following methods: Enter the recipient's phone number. Add the recipient from the contacts. 4. Press to send the message. Reading a message 1. Select Message > Inbox. 2. Press / 3. Press to open and read the message. Press to scroll to a message in the list. to manage the message.
to delete the character to In editing mode, you can press the left of the cursor or press and hold characters. to delete all In predictive and traditional input mode, press the 0 key to enter a space. In any input method, press the * key to display the symbol list. Traditional input In traditional input mode, press the number keys to enter letters. Press a number key repeatedly until the desired character appears.
9 FM (Optional) FM Radio helps you conveniently listen to the FM radio programs. Select Menu > FM radio, and then press / to switch the channel. Press / to adjust the volume. You can select Options for more operations. You can connect the provided power cable to your phone for better reception. 10 Security Setting the phone lock The phone lock protects your phone from unauthorized use. If you enable phone lock, you will be prompted to enter a phone lock code before you use the phone.
personal password. It is recommended that you periodically change this phone lock code for enhanced security. When restoring the phone to factory settings, you must enter the correct phone lock code. Setting the keypad lock In standby mode, press and hold # key to lock the keypad. In this case, you can only dial emergency numbers and answer incoming calls. In standby mode, press and then * key to unlock the keypad. Select Settings > Phone settings > Auto keypad lock to set the keypad lock.
What can I do if F362 cannot be powered on? 1. Remove the battery cover and check whether the battery is installed properly. 2. If the battery is properly installed, a possible cause for the problem is that the battery power is low. Charge the battery, and then try to power on the phone. What can I do if no information is displayed on the screen? If the phone is not used for a long time and the battery runs out of power, the phone may not display any information when it is being charged.
What can I do if the in-call volume is too high or too low? During a call, press navigation keys to adjust the volume. 12 For more help Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. 13 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.
Areas with flammables and explosives Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security Observe local laws and regulations while using the device.
device against any danger caused by lightning. Ideal operating temperatures are 0°C to 45°C. Ideal storage temperatures are -40°C to +70°C. Extreme heat or cold may damage your device or accessories. Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.
Accessories Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards. Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area.
Battery safety Do not connect battery poles with conductors, such as keys, jewelry, or other metal materials. Doing so may short-circuit the battery and cause injuries or burns. Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated. Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose it to water or other liquids.
Cleaning and maintenance Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a microwave oven or hair dryer. Do not expose your device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion. Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.
Environmental protection The device and its accessories (if included), such as the power adapter, headset, and battery should not be disposed of with household garbage. Disposal of the device and its accessories is subject to local regulations. Support proper collection and recycling.
EU regulatory conformance Certification information (SAR) This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves.
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. FCC Regulatory Compliance Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.
--Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
Other trademarks, product, service and company names mentioned may be the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.
Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.
