Welcome to HUAWEI F202 USER GUIDE
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors.
Appearance The figures in this guide are provided for your reference only. Front View 1 2 Left function key Navigation keys Select the option displayed in the lower left corner of the screen. Access the main menu by pressing the OK key in standby mode. Access a shortcut menu by pressing the corresponding navigation key in standby mode. Adjust the volume by pressing the navigation keys during a call.
5 6 Speaker key Call/Send key Activate the hands-free mode to dial a number already entered or answer an incoming call. Make or answer a call. View the call log in standby mode. Enter numbers, letters, and symbols. Number keys (1–9): Speed-dial a user-assigned 7 Number and symbol keys phone number by pressing and holding a key in standby mode. # key: Switch between text input methods in editing mode. * key: Display the symbol list in editing mode.
Do not frequently remove the UIM card when using the phone. Installing the Battery Before using the phone, install the battery properly. When installing the battery, ensure that the phone is powered off and is disconnected from the power adapter; ensure that the golden contacts of the battery mate securely with those in the battery slot. If the phone will not be used for a long time, remove the battery from the phone. Charging the Battery When new phones are delivered, the battery power is low.
Therefore, charge the phone for a while and then power on the phone the first time you use it. When you use the phone, it is recommended that you connect the power adapter to the phone. When using the battery to power the phone, ensure that the battery power is sufficient. Powering On the Phone To power on the phone, press and hold the end key until the screen lights up. Press and hold the end key to power off the phone. Call Functions Making a Call 1.
Reading a Message The phone stores received messages in the inbox. 1. Select Messages > Inbox. 2. Press the up or down navigation key to scroll to a message in the list. 3. Press the OK key to open and read the message. 4. Press the left function key to manage the message. Text Input Methods Switching Between Input Methods In editing mode, press the # key to switch between input methods.
Settings To configure and customize your phone settings, select Menu > Settings. Phone Lock To set the phone lock, select Settings > Security > Phone Lock. You can change the default phone lock code (000000) to a personalized password. Keypad Lock In standby mode, press and hold the # key to lock the keypad. In standby mode, press the left function key and then the * key to unlock the keypad. (Optional) PIN and PUK A Personal Identification Number (PIN) protects your UIM card from unauthorized use.
FAQs If problems occur during the use of the phone, refer to the following sections for a proper solution. If a problem persists, contact your phone vendor. Phone Cannot Be Powered On 1. Remove the battery cover and check whether the battery is installed properly. 2. If the battery is properly installed, a possible cause for the problem is that the battery power is low. Charge the battery, and then try to power on the phone.
Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
present a hazard to aircraft operation, or be illegal. Operating environment Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. Before connecting and disconnecting cables, stop using the device and disconnect it from the power supply. Ensure that your hands are dry during operation. Place the device on a stable surface.
others. The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Keep the device in a place with good reception. The distance between the device and other metal materials (such as metal brackets or metal doors and windows) should be greater than 25 cm and the distance between the device should be greater than 30 cm. Child's safety Comply with all precautions with regard to child's safety.
Battery safety Do not connect battery poles with conductors, such as keys, jewelry, or other metal materials. Doing so may short-circuit the battery and cause injuries or burns. Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated.
the cable, causing the device to malfunction. Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables connected to it. Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
EU regulatory conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the web site www.huaweidevice.com/certification. The following marking is included in the product: 0979 This device may be operated in all member states of the EU. Observe national and local regulations where the device is used.
