ETS8521 Cordless Phone Copyright © 2007 Huawei Technologies Co., Ltd. and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice.
Your Cordless Phone Earpiece Screen Headset Jack Navigation Key Right Soft Key Left Soft Key Send Key End/Power Key Number Keys # Key Key Microphone Charger Interface 1
Note z This is a sketch. Your cordless phone may be different. It is subject to your actual one. z To achieve the optimal effect, use the cordless phone away from the charger stand. z FCC Class B Statement: z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Keys and Functions Press… To… z z View the dialed calls in the standby mode. Make or answer a call. Power on the cordless phone by pressing and holding it. z Power off the cordless phone by pressing and holding it in standby mode. z End a call or reject an incoming call. z Return to the home screen. Select the option displayed on the lower left corner of the screen. z Select the option displayed on the lower right corner of the screen.
Press… * key To… Perform different operations for different functions of the cordless phone. z # key z Lock the keypad in the standby mode (by pressing and holding it). Perform different operations for different functions of the cordless phone.
Menu Tree Phone Book Messages CallHistory 1. Search 2. Add New 1. Write Message 2. Inbox 1. Missed Calls 2. Received Calls 3. Groups 3. Outbox 3. Dialed Calls 4. Speed Dial 4. Draft 5. Voice Mail 4. Call Duration 5. Delete All 5. Copy All（*） 6. Delete All 7. My Phone Num 8. Memory Status 6. Message Settings 7. Delete All Fun&Utility Profiles Settings 1. Alarm 1. General 1. Display 2. Schedule 2. Silent 2. Call Settings 3. Calculator 3. Outdoor 3. Phone Settings 4. Stopwatch 4.
Note z FM Radio function is optional. Whether your cordless phone has this function, please contact your network operator. z Please use a headset compatible with your cordless phone when enjoying the FM Radio function. z The USB connector is used only for charging.
Installing the UIM Card and Battery Consult the network operator if a UIM card is needed. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly fit to that of the card holder. Charging the Battery 1. Connect the cordless phone to the charger stand. 2. Connect one power adapter connector to the charger stand. 3. Connect the charger to an AC power socket. During the charging, the animation of charging icon is displayed. 4.
z z Press Up or Down key to scroll to a submenu item and press to select the submenu. Press the Number key corresponding to the number of a submenu to select it. 5. Press to return to the previous menu or return to the home screen. 6. Press to return to the home screen. Making a Call 1. In the standby mode, enter a phone number. 2. Press to dial the number. 3. Press Note to end the call.
Cordless phone Lock The cordless phone lock protects your cordless phone from unauthorized use. The default cordless phone lock code is 000000. You can change it into any numeric string of 4 to 8 digits. If the cordless phone lock is enabled, you need to enter the correct cordless phone lock code when you power on the cordless phone. PIN and PUK The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unblocking key (PUK) can unblock the blocked PIN.
Changing the Text Input Modes The indicator of the current text input mode is displayed on the screen. In the editing mode, press Note z z z to change the input mode. In the editing mode, press once to delete the letter on the left of the cursor. Press and hold to delete all the entered letters. In the "eZiEn" input mode, press to enter a space. In the "ABC" or "abc" input mode, press once to enter a space, twice to enter "0", and three times to move the cursor to the next line.
Note If the letter you want to enter is on the same key as the previous one, you can enter the latter one only after the cursor appears again or after you press the Right key to move the cursor to the next space. Entering Numbers 1. In the "123" input mode, press a key labeled with the desired number. 2. In the "ABC" or "abc" input mode, press a key continuously or press and hold it until the desired number appears on the screen. 3.
Warnings and Precautions Electronic Device z Power off your cordless phone near high-precision electronic devices. The cordless phone may affect the performance of these devices. z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
z Area where it is generally suggested to stop the engine or a vehicle Traffic Safety z Please observe local laws and regulations on cordless phone use. Do not use your cordless phone while driving to avoid traffic accident. z Secure the cordless phone on its holder. Do not place the cordless phone on the seat or other places where it can get loose in a sudden stop or collision. z Use the cordless phone after the vehicle stops at a safe place.
z Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the cordless phone. z Do not subject your cordless phone, battery, and charger to serious collision or shock. Otherwise, battery leakage, cordless phone malfunction, overheat, fire, or explosion may occur. z Do not put your cordless phone in the back pocket of your trousers or skirt, to avoid cordless phone damage while seated.
z The cordless phone may interfere with nearby TV sets, radios and PCs. z In accordance with international standards for radio frequency and radiation, use cordless phone accessories approved by the manufacturer only. z While using the mobile cordless phone, observe the local laws and regulations, and respect others' privacy and legal rights. Clearing and Maintenance z Before you clean or maintain the cordless phone, power off the cordless phone and disconnect it from the charger.
Emergency Call You can use your cordless phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the cordless phone for essential communications. Battery z Use the battery approved by the manufacturer only. Otherwise, explosion may occur. z Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode. z Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material.
z Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the charger. z If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the cable at once. Otherwise, electric shock, short-circuit of the charger, or fire may occur. z Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur. z Do not use the charger in a dusty and damp environment.
safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a cordless phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the cordless phone while operating can be well below the value.
For the following equipment Product: CDMA Cordless phone Type Designation/Trademark: HUAWEI/ETS8521 Manufacturer's Name : Huawei Technologies Co.,Ltd. Manufacturer's Address : Bantian, Longgang District, Shenzhen, 518129, Guangdong, P. R. China. is herewith confirmed to comply with the requirements set out in the Council Directive1999/5/EC for radio equipment and telecommunications terminal equipment. For the evaluation of the compliance with this Directive.
Warning: This is a Radio Frequency Device! Please check the local regulations before importing the product in any particular country.
