HUAWEI ETS3228 Fixed Wireless Terminal User Guide
Wonderful Communication, Mobile Life. Thank you for choosing HUAWEI ETS3228 Fixed Wireless Terminal.
Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice.
Table of Contents 1 Warnings and Precautions .....................................................................................................1 2 Introduction ...........................................................................................................................5 Packing List ...................................................................................................................5 Appearance of the FWT ........................................................................
Deleting a Contact .......................................................................................................24 Copying a Contact .......................................................................................................24 Groups..........................................................................................................................24 Memory Status.............................................................................................................
1 Warnings and Precautions Before using HUAWEI Fixed Wireless Terminal (hereinafter referred to as the FWT), read the following cautions and let your children know these, so that you can use your FWT correctly and safely. Basic Cautions According to the packing list, check items in the package box to make sure that they are intact and undamaged. Before installing and using FWT, read the user guide carefully.
Operating Environment y Do not place magnetic storage media such as magnetic cards and floppy disks near the FWT. Radiation from the FWT may erase the information stored on them. y Do not put your FWT, battery, or other accessories in containers with strong magnetic field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire, or explosion may result.
Emergency Call You can use your FWT for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the FWT for essential communications. Battery y If the battery fluid gets into eyes, do not rub them. Wash with clean water and seek medical assistance immediately. y If the battery fluid contacts skin or cloth, wash with clean water immediately to avoid irritation to the skin. y Do not dispose of the battery in fire.
y Do not place any heavy object on the power cord of the power adapter. Do not damage, change, or pluck the power cord. Environmental Protection Please abide by the local laws in disposing of the package materials of your FWT, consumed batteries and used FWT, and try to recycle them. This HUAWEI device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2 Introduction Packing List The FWT package box contains the following items. If any of the items is lost or damaged, contact the service provider.
Appearance of the FWT Front View No. Item Description 1 Indoor antenna To receive signals. 2 Screen To display information. 3 Left soft key z z z 4 Scroll key z z z z 6 In the standby mode, press it to access the home screen. In the non-standby mode, press it to perform the operation displayed on the lower left corner of the screen. Press it to answer an incoming call. Up key: Press it to access the Write message interface. Down key: Press it to view the phone book.
No. 5 Item Right soft key Description z z z 6 OK key z z 7 End key z z z 8 Handsfree key z z z 9 Call/Redial key z z In the standby mode, press it to access the Phone book interface. In the non-standby mode, press it to perform the operation displayed on the lower right corner of the screen. In edit mode, press it to delete letters. In the standby mode, press it to access the home screen.
Back View 1 2 10 3 4 6 5 8 No. 8 7 Item 9 11 12 13 Description 1 Indoor antenna To receive signals. 2 Hook To fix the FWT when it is installed vertically. 3 SIM case slot To house the SIM card 4 Battery case To house the battery. 5 Battery To supply the FWT with power. 6 Battery cord jack To connect to the battery cord. 7 Coiled cord jack on the main unit To connect to the handset coiled cord. 8 Coiled cord To connect the handset with the main unit.
Icons Icon Description Indicates the signal strength. The more the bars are, the stronger the signal is. Indicates there is a new text message. Indicates there is a new voice message. The blinking icon indicates that the message memory is full. Indicates there is an outgoing call or an ongoing call. Indicates the alarm clock is activated. Indicates the battery power level. The more the bars are, the higher the power level is. Indicates the FWT is powered by the power adapter.
3 Installation Installing the SIM Card (Optional) Caution: The SIM card and its golden contact can be easily damaged by a scratch or bend. Be careful when installing or removing the SIM card. to power the FWT off. Then disconnect it from the power socket. Press and hold Install the SIM card according to the following figure. Make sure that the golden contact of the SIM card faces downwards. Installing the Power Adapter or the Battery Note: y The FWT can be powered by the power adapter or the battery.
Installing the Power Adapter Press and hold to power the FWT off. Connect the power adapter to the FWT, and plug it to the power socket. Installing the Battery Press and hold to power the FWT off and then disconnect the FWT from the power socket. Then install the battery as shown in the following figure. When installing the battery, make sure that the battery cord plug matches the battery jack. Do not install reversely. Removing the Battery Press and hold to power the FWT off.
Checking the Signal Strength 1. 2. 3. After installing the antenna, press and hold to power the FWT on. Wait until the appears or the dialing tone is heard when you lift the handset. signal strength icon does not appear after five minutes or you hear the failure tone when you lift the If handset, it indicates that the FWT is not receiving signals. In this case, adjust the antenna direction until you can hear the dialing tone when lifting the handset.
2. According to the distance between the two hooks (7.7 cm), hammer two nails into the wall with 3 mm end left out. 7.7cm 3. Snap the hooks to the nails. Validating After installing the FWT, make a call to check whether it is correctly installed. to power the FWT on. After connecting the FWT to the power 1. Press and hold 2. 3. icon appears, indicating that the FWT is powered normally. socket, the appears. Lift the handset.
4 Basic Operations Powering the FWT On or Off When the FWT is powered off, press and hold In the standby mode, press and hold to power it on. to power it off. Making a Call Making a Call through the Keypad 1. 2. 3. In the standby mode, press number keys to enter a phone number. If the entered phone to clear the phone number. number is wrong, press Press to dial the phone number. Press to end the call or cancel the dialing. Making a Call from the Dialed Calls List 1. 2. 3.
Auto Dialing If the auto-dial function is enabled, an entered phone number is dialed automatically. If the activation-time is too short, an incomplete phone number may be dialed. 1. 2. Select Menu > Settings > Call Settings > Auto Dial. Select one of the following options: Off, After 3 Seconds, After 4 Seconds, After 5 Seconds, After 6 Seconds, After 7 Seconds, After 8 Seconds, or After 9 Seconds. Answering a Call In the standby mode, you can lift the handset or press incoming call.
5 Call History Missed Calls/Received Calls/Dialed Calls The FWT can store 20 missed calls, 20 received calls, and 20 dialed calls. Note: In the standby mode, phone numbers of missed calls are displayed. Select View to to dial a phone number. view details. Press In standby mode, Select Menu > Call history. Then select Missed calls, Received calls or Dialed calls. When viewing the call history, you can do the following: y View: View the call duration. y Delete: Delete a phone number.
6 Text Entry Text Input Mode While entering text, you can press the # key to change the input mode. The following table lists the input modes and their indicators. Indicator eZiEn Text Input Mode Smart English ABC English upper case ES Spanish upper case abc English lower case es Spanish lower case Num Numbers Note: once to delete the letter on the left of the cursor. In the edit mode, press Press and hold for over two seconds to delete all letters.
5 Call History Note: y After you enter several letters, the FWT predicts the remaining letters to make out the candidate words. Press the Up/Down key to scroll the words and press the Right key to confirm. y Press the 0 key to enter a space. y Press the * key to display the symbol list. y In English input mode,Press the # key to change the case of letters. Alphabetical Text Input Alphabetical text input allows you to enter uppercase ("ABC"or"ES") or lowercase ("abc"or "es") English letters.
7 Messages Writing and Sending a Message 1. Select Menu > Messages > Write Message. 2. Write the message. When writing the message, press y Insert phrase: Insert a commonly used phrase. y Insert number: Insert a contact number from the phone book. to select an option: to select an option: 3. After writing the message, press y Send: Send the message. y Save as draft: Save the message to the draft. 4. You can insert up to ten phone numbers.
5 Call History Operations When reviewing a message, you can perform operations on the message. 1. Select Menu > Messages > Inbox. 2. Press the Up/Down key to scroll the messages. 3. Press to view the message. 4. Press (Menu) to select an option: y Reply: Reply to the message. y Forward: Forward the message. y Delete: Delete the message. y Copy: Copy the messages stored in the SIM card to the FWT and the way back. y Call: Call the phone number of the message sender.
5 Call History Note: y If you have set up your voice mail box number correctly, you can press the 1 key in the standby mode to access the voice mailbox. y The voice mail function is network dependent. You need to subscribe to the service. For the voice mailbox number and other information, contact the service provider. Message Settings Setting the Service Center Number The service provider provides the short messaging service center (SMSC) number. If you have entered the SMSC number, it is displayed.
5 Call History y Send And Save: Enable the auto-save function. Messages are automatically saved after being sent. Messages sent successfully are saved to the outbox. Messages sent unsuccessfully are saved to the draft. y Send Only: Disable the auto-save function. Setting a Template You can insert phrases when editing a message. You can also customize the phrases. 1. Select Menu > Messages > Message Settings > Phrase. 2. Press the Up/Down key to scroll the phrases. 3.
8 Phone Book Adding a Contact A contact is saved to the memory in use. 1. Select Menu > Phone Book > Add New. (OK). 2. Enter the name and press 3. Set other options: y If the memory in use is the FWT, you can set the user name, group name, the general number, the home number, and the office number. y If the memory in use is the SIM card, you can set only the general number. 4. Press (OK) to save the settings and press the Up/Down key to set other items. 5.
5 Call History 2. Press (View) to confirm. 3. Press to select Edit. 4. Press the Up/Down key to select an option and press 5. Press (Save) to save the change. 6. Press (Save) to save the contact. to edit content. Deleting a Contact Deleting a Contact 1. Select Menu > Phone Book > Search to search for a contact. 2. Press (Menu) and select Delete. 3. Press (OK) to confirm or press (Cancel) to cancel.
Memory Status The number of contacts can be stored in the SIM card is determined by its capacity. Select Menu > Phone Book > Memory Status to view the memory status of the SIM card and the FWT.
9 Settings Display You can set the backlight, the contrast, and whether to display the date and the time. 1. 2. Select Menu > Settings > Display. Set the backlight, the contrast, and whether to display the date and the time. FWT FWT Settings You can set the date, the time, the language, and the display. 1. Select Menu > Settings > Phone settings. 2. Set the following items: y Date&time: Set the date, the time, and the display format. y Language: Select Chinese or English.
Note: After setting the IP number, select a contact from the phone book. Then select Menu > IP dialing to make an IP call. Profile The FWT provides three profiles. You can enable or customize a profile. Selecting a Profile 1. 2. 3. In the standby mode, select Menu > Settings > Profiles. Press the Up/Down key to scroll profiles General, Outdoor, and Quiet. (Select) and select Set to enable a profile. Press Editing a Profile 1. 2. In the standby mode, select Menu > Settings > Profiles.
5 Call History y Off: Turn the filter off. 3. Press to confirm. Supplementary Services You can set network related functions, such as call waiting, call divert, and call barring. 1. Select Menu > Settings > Network serv.. 2. Set the following options: Call waiting: Activate or deactivate the function. If the function is activated, when there is an incoming call during an ongoing call, you can answer or reject it. Call divert: Divert incoming calls to a specified phone number.
Caution: All the network functions are network dependent. Contact the service provider for details.
10 Fun & Utility Alarm Clock If the alarm clock is activated, the FWT rings at the preset time when it is powered on. You can set up to three alarm clocks. 1. 2. 3. 4. 5. Select Menu > Fun&Utility > Alarm. Press the Up/Down key to scroll the alarm clocks. (Select) to select an alarm clock. Press Press the Up/Down key to set alarm options. (Save) to save the settings. Press Calendar 1. Select Menu > Fun&Utility > Calendar. (Select) to select an option: 2. Press y View: View a specific event.
11 Menu Commands Phone Book See "Phone Book" in chapter 8. Messages See "Messages" in chapter 7. Fun & Utility Alarm See "Alarm Clock" in chapter 10. Calendar See "Calendar" in chapter 10. Calculator You can use the calculator for basic calculations. Press the # key to enter the decimal point. Press the * key to select operators such as add, subtract, multiply and to display the results. divide.
12 Maintenance and Troubleshooting Maintenance 1. 2. 3. 4. Place the FWT in a clean and dry environment. The temperature of the place should be no higher than +55°C or lower than –10°C. If the FWT is covered with dust, clean it with fine clean cloth. Do not clean it with cleanser or other chemical solvents. If the FWT does not operate normally due to a failed battery, replace the battery in time or use the power adapter to supply the FWT with power.
Time is not displayed. 1. 2. 3. 4. Select Menu > Settings > Display > Show time to check whether the time is set to be displayed. If the problem persists, make sure that the antenna is installed properly. Adjust the antenna direction or move the FWT to a place covered with stronger signals. If the problem persists, contact the service provider to check whether the FWT is within the signal coverage area.
13 Specifications Item Dimensions (W × D × H) Description 210 mm × 183 mm × 81 mm Weight Less than 700 g Placement mode Horizontal or wall mounting Input voltage Linear power supply AC: 190–300 V DC: 12 V Spare battery Type: NiMH Capacity: 3.6 V 1000 mAh Maximum transmission power ≥ 23 dBm Typical conversation power consumption 1.
Manufacturer Model Tech-Power Electronics (Shenzhen) Co., Ltd HGP1205 Highlight Electronic Co., Ltd, DY41F005A Highlight Electronic Co., Ltd, DY41F005B Shilong Fuhua Electronice Co., Ltd UE41120050DC Shilong Fuhua Electronice Co.
