Wonderful Communication, Mobile Life. Welcome to HUAWEI ETS2558 Fixed Wireless Terminal.
Copyright © 2006 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks And HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice.
Table of Contents 1 Warnings and Precautions...................................................................................1 2 Introduction ........................................................................................................4 Packing List..................................................................................................4 Appearance of the FWT ...............................................................................5 Icons..........................................
Editing a Contact........................................................................................22 Deleting a Contact......................................................................................23 Copying a Contact......................................................................................23 Groups........................................................................................................24 Memory Status ................................................................
1 Warnings and Precautions Before using HUAWEI Fixed Wireless Terminal (hereinafter referred to FWT), please read the following cautions and let your children know these, so that you can use your FWT correctly and safely. Basic Cautions According to the packing list, check items in the package box to make sure they are complete and undamaged. Before installing and using FWT, read the user manual carefully. Electronic Device Switch your FWT off near high-precision electronic devices.
Operating Environment y Do not place magnetic storage media such as magnetic cards and floppy disks near the FWT. Radiation from the FWT may erase the information stored on them. y Do not put your FWT, battery, or other accessories in containers with strong magnetic field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire, or explosion may result. y Do not leave your FWT, battery, or power adapter in a high-temperature place or use them in a place with flammable gas.
Battery y If the battery fluid gets into eyes, do not rub them. Wash with clean water and seek medical assistance immediately. y If the battery fluid contacts skin or cloth, wash with clean water immediately to avoid irritation to the skin. y Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode. y When installing the battery on your FWT, do not push the battery by force lest battery fluid leak out or the battery crack.
2 Introduction DOC document Packing List The FWT package box contains the following items. If any of the items is lost or damaged, contact your local dealer.
Appearance of the FWT Front View of the FWT 1 2 13 3 4 5 6 7 12 8 9 11 No Item 10 Description 1 Indoor antenna To receive signals. 2 Display To display information. Left function key y In the standby mode, press it to access the home screen. 3 y In the non-standby mode, press it to perform the operation displayed on the lower left corner of the display.
No Item Scroll key Description y Up key: In the standby mode, press it to view the schedule.; during a call, press it to increase the volume. y Down key: In the standby mode, press it to set FM or alarm clocks,; during a call, press it to decrease the volume. 4 y Left key: In the standby mode, press it to enter the List of call.. y Right key: In the standby mode, press it to access the Messages screen.. Right function key 5 y In the standby mode, press it to access the Phone Book screen.
No Item y In the standby mode, press and hold it to lock the FWT. # key 10 y Press it to perform corresponding operations of functions. y In the standby mode, press and hold it to activate the quiet profile. * key 11 12 13 Description y Press it to perform corresponding operations of functions. Number keys Press 0– 9 keys to enter numbers/characters or speed dial a phone number. Handset Lift it to answer a call. Back View of the FWT 1 2 9 3 6 10 5 7 4 No.
No. Item Description 5 Battery cord jack To connect to the battery cord. 6 Handset coiled cord jack on the handle set To connect to the handset coiled cord. 7 Handset coiled cord To connect to the handset to the handle set. 8 Handset coiled cord jack on the handset To connect to the handset coiled cord. 9 Handset 10 DB9 serial port 12 Power supply jack To make a call or answer a call by lifting it. To maintain the FWT through it. To connect to the power adapter for power supply.
3 Installation Installing the UIM Card (Optional) Caution: y Whether a user identity module (UIM) card is needed depends on your service provider. Consult your service provider for details. y The UIM card and its golden contact can be easily damaged by scratch or bending. Be careful when installing or removing the UIM card. Press and hold to power your FWT off and then disconnect it from the power socket. Install the UIM card according to the following figure.
Installing the Power Adapter or the Spare Battery Note: y The FWT can be powered by the power adapter or the spare battery. y If the FWT installed with the spare battery is powered by the power adapter, the spare battery is automatically charged. After the spare battery is fully charged, the charging stops. y Before using the spare battery for the first time, charge the spare battery for at least eight hours.
Removing the Spare Battery to power your FWT off and then disconnect the FWT from Press and hold the power socket. Then remove the battery house cover. Disconnect the battery cord and take out the spare battery. Installing the Antenna Installing the Indoor Antenna Power your FWT off and disconnect the FWT from the power socket. Then connect the indoor antenna to the antenna jack on the handle set. Make sure that the antenna is stably connected to the antenna jack.
Vertically 1. Pull out the hook from the slot and turn it around. Then push it back so that the handset will not fall down when FWT is placed vertically. 2. According to the distance between the two hooks (7.7 cm), hammer two nails into the wall with a 3 mm end left outside. 7.7cm 3. Snap the hooks to the nails. Validating After installing the FWT, you can make a call to check whether it is correctly installed. 1. Press and hold socket, the 2. 3. 12 to power your FWT on.
4 Basic Operations Powering the FWT On or Off When the FWT is powered off, press and hold In the standby mode, press and hold to power it on. to power it off. Making a Call Making a Call Through the Keypad 1. 2. 3. In the standby mode, press number keys to enter a phone number. If the entered phone . number is wrong, press Press to dial the phone number. Press to end the call or cancel the dialing. Making a Call from the Dialed Calls List 1. 2. 3. to access the Dialed Calls screen.
3. If a number key is not assigned to a contact, press to select a contact from the phone book. 4. If a number key is assigned to a contact, press y Change: Change a contact. y Delete: Delete the contact. for the following options: Answering a Call In the standby mode, you can lift the handset, press to answer a call. ,press or press Activating the Any Key Answer Function In the standby mode, select Menu > Settings > Call Settings > Any-key Answer to set the any-key answer function.
Select Menu > Settings > Phone Settings > Keyguard. Press the up/down key to select: y Off: Deactivate the keyguard function. y 30 Seconds, 2 Minutes or 5 Minutes: Set the FWT to lock automatically if there is no operation in 30 seconds, 2 minutes or 5 minutes. Unlocking the Keypad Press . Then press the * key to unlock the keypad.
5 Text Entry Text Input Mode While entering text, you can press the # key to change the input mode. The following table lists the input modes and their indicators. Indicator Text Input Mode eZiEn Smart English ABC English upper case abc English lower case 123 Numbers Note: In the edit mode, press once to delete the letter on the left of the cursor. for over two seconds to delete all letters at a time.
Note: z z z z z After you enter several letters, the FWT can give other letters to make out the candidate words. Press the up/down key or the * key to scroll the words and press the right key to confirm; or press number keys to enter letters. Press the 1 key to enter a full stop. Press the 0 key to enter a space. Press the * key to display the symbol list. Press the # key to change the case of letters.
6 Messages Writing and Sending a Message 1. Select Menu > Messages > Write Message. 2. Write the message. You can enter up to 160 English letters. When writing the message, y Insert Template: Insert a commonly used phrase. y Insert Phone Number: Insert a contact from the phone book. you can press for the following operations: 3. After writing the message, press y Send: Send a message. for the following operations: y Send&Save: Send a message and save it to the outbox.
4. Press (Options) to select Reply, Delete, Forward, Call or Save Number. Viewing the Outbox and the Draft The outbox stores messages that are sent successfully. You can delete, forward or re-send a message in the outbox. The draft stores drafts and messages that are not sent successfully. You can edit, send or delete messages in the draft. Deleting a Message 1. 2. Select Menu > Messages > Delete All. Select the messages to delete: y Inbox: Delete messages in the inbox.
Clearing the Voice Mail Notification 3. Select Menu > Messages > Voice Mail. 4. Select Clear Voice Mail Notification and press (Select). Message Settings Setting a Template Your FWT provides 10 commonly used phrases. You can insert these phrases when you edit a message and customize the phases. 1. Select Menu > Message > Message Settings > Templates. 2. Press the up/down key to scroll up or down the phrases. 3. Press (Select) to select the phrase to edit. 4.
y On: Activate the auto delete function. If the memory in use is full and there is a new message, the FWT automatically deletes the earliest message. y Off: Deactivate the auto delete function. If the memory in use is full, the FWT cannot receive messages. You need to delete some messages manually. Then the FWT can receive new messages. Setting the Priority Select Menu > Messages > Message Settings > Priority. You can set the sending sequence of messages from the short message service center (SMSC).
7 Phone Book Adding a Contact A contact is saved to the memory in use. 1. Select Menu > Phone Book > Add New. 2. Enter the name, and press 3. Set other options: y If the memory in use is the FWT, you can set: Name, General Number, Home y If the memory in use is the UIM card, you can set General Number only. (OK). Number, Office Number, and Memo (you need to set at least one phone number). 4. Press (OK) to save the settings and press the up/down key to set other items. 5.
Deleting a Contact Delete a Contact 1. Select Menu > Phone Book > Search to search for a contact to delete. 2. Press (Options) and select Delete. 3. Press (Yes) to delete the contact or press (No) to cancel. Delete All Contacts 4. Select Menu > Phone Book > Delete All. 5. Enter the FWT code and press 6. If the UIM card is available, select Phone to delete all the contacts saved in the FWT (OK). or select UIM Card to delete all the contacts saved in the UIM card.
Groups You can sort contacts into different groups for easy management. You can set up to 10 groups. Each group can contain up to 50 contacts. 1. Select Menu > Phone Book > Groups. 2. Press the up/down key to scroll up or down the groups. 3. Press y View: View the contacts of a group. (Options) for the following options: y Add: Add a contact to the group. y Group Ring: Set a ring tone for the incoming calls of the group members. y Rename: Rename the group.
8 Settings Call Settings Minute Alert With the minute alert function activated, your FWT notifies you of the call duration by giving an alert 10 seconds before the end of each minute. 1. Select Menu > Settings > Call Settings > Minute Alert. 2. Select one of the following options: y On: Activate the minute alert function. y Off: Deactivate the minute alert function. Voice Privacy The voice privacy function can protect your conversion from interception. The voice privacy function is network dependent.
Select Menu > Settings > Call Settings > Call Forwarding: y All: Forward all incoming calls. y Busy: Forward an incoming call if your FWT number is in a call. y No Answer: Forward an incoming call if nobody answers the FWT or you want to reject the incoming call. y Default: If the FWT number is busy or nobody answers the call, the incoming call is y Cancel All: Cancel all the call forwarding functions. forwarded. Profile Settings Your FWT provides three profiles.
Operations During a Call During a call, press to select the following options: y Save Number: Enter a phone number and save it to the phone book. y Phone Book: Access the Phone Book screen. y Messages: Access the Messages screen. y Third Party Call: The function is network dependent. For details, consult your service provider. y Voice Privacy: The function is network dependent. For details, see "Voice Privacy" on page 25.
y If you enter wrong PUK codes 10 times consecutively, the UIM card is invalidated. Contact your service provider to retrieve a new card. If you enter wrong PUK code several times, consult your service provider for the correct PUK code. If the PIN code is activated, you are required to enter the PIN code every time (OK). you power on the FWT. Enter the correct PIN code and press Do the following to set the PIN code: 1. 2. 3. 4. Select Menu > Settings > Security > PIN Lock. (OK).
9 FM Radio Switching the Radio On/Off Switching the Radio On 1. 2. In the standby mode, select Menu > FM Radio. The FWT displays "Radio On!". The radio is switched on and the broadcasting screen is displayed. Select a channel to listen to. Switching the Radio Off 1. 2. 3. In the standby mode, select Menu > FM Radio. (Options) and select Switch Off. Press (Select) to switch the radio off and return to the home screen. Press Searching for a Channel Auto Tuning 1. 2. 3.
Inching Tuning 1. 2. 3. 4. In the standby mode, select Menu > FM Radio. (Options) and select Inching Tuning. Press Press the up/down key and the FWT searches for all available channels between 87.5 MHz and 108.0 MHz. The tuning increases or decreases 0.1 MHz each time. (Set) to add a channel to the channel list and return to the broadcasting Press screen or press (Back) to stop tuning and return to the broadcasting screen. Setting a Frequency 1. 2. 3. 4. In the standby mode, select Menu > FM Radio.
10 Fun & Utility Alarm Clock After the alarm clock is activated, it rings at the specified time when your FWT is powered on. You can set up to five alarm clocks. 1. Select Menu > Fun&Utility > Alarm. 2. Press the up/down key to scroll up or down the alarm clocks. 3. Press 4. Select Alarm Off to deactivate the alarm clock. (Select) to select an alarm clock. 5. Enter the time and press 6. Select: (OK). y Once: The alarm clock rings only once.
11 Menu Commands Phone Book See "Phone Book" on page 22. Messages See "Messages" on page 18. Call History Missed Calls z Press the up/down key to scroll up or down the records (up to 20). Received Calls z Press to dial a record. You can save, delete or send a message to a record. Dialed Calls Call Duration z z z Delete All The FWT records the duration of the last call, dialed calls, received calls, and all calls. You can view or reset the duration.
Stopwatch Your FWT provides the stopwatch function, which can record a time up to 9 hours 59 minutes 59 seconds and 990 milliseconds. World Clock You can view the Greenwich Mean Time (GMT), current time of other 31 major time zones around the world, and Beijing Time. Line Game For details, see Help in your FWT. Smash Game For details, see Help in your FWT. Profiles See "Profile Settings" on page 24. Settings Display You can set backlight, contrast, date format, time format, and banner.
12 Maintenance and Troublesho oting Maintenance 1. 2. 3. 4. Place the FWT in a clean and dry environment. The temperature of the place should be no higher than 55°C or lower than -10°C. If the FWT is covered with dust, please clean it with clean fine cloth. Do not clean it with cleanser or other chemical solvents. If the FWT does not operate normally due to a failed spare battery, please replace the spare battery in time or use the power adapter to supply the FWT with power.
Time is not displayed. 1. 2. 3. Make sure that the antenna is installed properly. Adjust the antenna direction or move the FWT to the place covered with better signal strength. If time is still not displayed, contact your service provider to check whether the FWT is in the signal coverage area. After the FWT is powered off, the display displays nothing sometimes and power supply icon and blinking battery icon sometimes. No information on the display is a normal status of FWT after power-off.
13 Specifications Item Description Frequency Band 1900 M(ETS2558) Dimensions (W × D × H) 205 mm × 184 mm × 65 mm Weight About 630 g Mounting mode Horizontal or wall mounting Input voltage* AC: 120 V DC: 12V DC Spare battery Type: NiMH Capacity: 3.6 V 1000mAh Maximum transmit power ≥ 23 dbm Typical conversation power consumption 1.2 W Typical stand-by power consumption 40 mW Ambient temperature -10℃ to 55℃ *“ For use onl y wi t h power suppl y “Tech- Power ELECTRONI CS ( SHENZHEN) CO.
