User's Manual

ManualsBrandsHuawei Technologies ManualsElectronicsFixed Wireless Terminal

Packing List

The FWT package box contains the following items. Check the items according to the

following table. If any of the items is missing or damaged, contact your local dealer.

Item Quantity Item Quantity

Main unit, handset, and

coiled cord

1 Battery 1

Power adapter 1 Antenna (optional) 1

FWT User Guide 1 Certificate of Quality 1

Front View of the FWT

No. Item Function

1 Display screen Displays the current operation of the FWT

2 SET/OK key Set and save various functions

RECEIVED/

▲

key

Access Call In in standby mode

DIALED/

▼

key

Access Call Out in standby mode

5 CANCEL key Delete queried information

6 End key

End or reject a call

End the current operation when setting parameters

Press and hold it to switch on/off the FWT

7 HAND-FREE key

Make a call or receive an incoming call without lifting the

handset

8 Call/Redial key

Dial the telephone number on the screen

Answer the call when there is an incoming call

Summary of content (10 pages)

PAGE 1
Packing List The FWT package box contains the following items. Check the items according to the following table. If any of the items is missing or damaged, contact your local dealer. Item Quantity Item Quantity Main unit, handset, and coiled cord 1 Battery 1 Power adapter 1 Antenna (optional) 1 FWT User Guide 1 Certificate of Quality 1 Front View of the FWT 1 2 3 4 5 6 7 8 No.
PAGE 2
Back View and Side View 6 2 9 1 8 7 6 2 5 3 4 No. 1 3 Item No. Antenna jack 2 Item Power jack 3 Data port 4 Battery cord jack 5 Battery container cover 6 Coiled cord jack on main unit 7 Battery case 8 UIM card slot 9 Hook Screen Icons NO. Item Description 1 Indicates the signal strength. The more the bars are, the stronger the signal is. 2 Indicates that you are in the hands-free mode of the FWT. 3 Indicates that there is an incoming call or a call is ongoing.
PAGE 3
Installing UIM Card (Optional) Caution: y Whether an UIM card is needed, consult your service provider for details. y The UIM card and its golden contact can be easily damaged by scratch or bending. Thus, be careful when installing or removing the UIM card. After power off the FWT and disconnect the power, install or remove the UIM card. Make sure that the golden contact of the UIM card is facing downwards. Installing the Battery Note: y The FWT can be powered by the power adapter or the battery.
PAGE 4
Vertically 1. Pull out the handset retaining clip from the slot turn it around and then push it back so that the handset will not fall down when the FWT is placed vertically. 2. According to the distance between the two hooks (7.7 cm), hammer two nails into the wall with a 3 mm end left outside. Snap the hooks to the nails. 3. Validating You can make a call to check whether the FWT is correctly installed. 1. Press and hold to power on the FWT. After connecting the FWT with the external 2. 3.
PAGE 5
Answering a Call In standby mode, you can lift the handset, press or press to answer a call. Note: y In standby mode, press to reject the incoming call. y Caller ID display function is network dependent. Consult your service provider. Options During a Call To switch a call from the handset to the hands-free mode, press , and then put back the handset when the icon is displayed on the screen. To switch a call from the hands-free mode to the handset, just lift the handset.
PAGE 6
Make a Call When the Long Distance Lock Is Enabled When the long distance lock is enabled, adopt method 2 of Making a Call. Follow these steps: 1. Enter the long distance number you want to dial. 2. 3. Press to display code. Enter the password. The FWT switches to the hands-free mode and dials the number. Modifying the Long Distance Lock Password 1. 2. 3. 4. 5. 6. Press SET/OK key to display the selecting function menu. Press ▲ or ▼ key until the screen displays Code.
PAGE 7
Maintenance y y y y The FWT should be deployed in a clean and dry environment. A temperature higher than 55°C or lower than –10°C may damage the FWT. If the FWT is covered with dust, clean it with a clean fine cloth. Do not clean the FWT with cleanser or other chemical solvents. If the battery fails and causes problems of the FWT, replace it or use the power adapter. If the FWT does not work properly, consult your service provider.
PAGE 8
Warnings and Precautions To use HUAWEI Fixed Wireless Terminal (FWT) correctly, efficiently and safely, you should notice following cautions. Basic Cautions y Check fittings based on the packing list to make sure they are complete and undamaged. y Read this manual carefully before installing and using FWT. Electronic Device Switch your FWT off near high-precision electronic devices. The FWT may affect the performance of these devices.
PAGE 9
y y The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Please observe the national local regulations in the location where product is to be used. This product may be restricted for use in some or all countries of European Union. Emergency Call You can use your FWT for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the FWT for essential communications.
PAGE 10
Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Website: http://www.huawei.com Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and HUAWEI are trademarks of Huawei Technologies Co., Ltd.