User's Manual

User Manual 5 Using the eSpace 6830
32
For details on how to configure the manager and secretary service, see the
Huawei IP Phone eSpace 6810&6830&6850&6870 Administrator
Manual or contact the administrator.
Step 1
Customer C calls manager A.
The phone of secretary B rings. The LINE 1 indicator on both manager A's
phone and secretary B's phone blinks.
Step 2
Secretary B presses the
LINE1
key and answers the call.
Step 3
Secretary B presses the soft key
SeizeLine
soft key and enters the number of
the manager A's private line to call manager A.
The call between secretary B and customer C is held.
Step 4
Manager A presses the
LINE2
key and answers the call from secretary B.
Step 5
Manager A presses the
LINE1
key and talks with customer C.
The call between manager A and secretary B is held. If secretary B hangs up,
the call ends.
Step 6
Manager A or customer C hangs up.
The call ends, and the LINE 1 indicator is off.
z eSpace 6830 allows one manager's phone to be bound to a maximum of
two secretaries' phones, and one secretary's phone to be bound to a
maximum of four managers' phones.
z If two secretaries serve a manager, only one secretary answers the call
and transfers it to the manager.
BLF Function
After the BLF function is enabled for eSpace 6830, you can press the corresponding
DSS key to check the status of the monitored phone. You can press this key to directly
make a call to the specified number.
For details on how to configure the BLF service, see the Huawei IP Phone
eSpace 6810&6830&6850&6870 Administrator Manual or contact the
administrator.
A user assigns the BLF function to a DSS key on phone A, and configures phone B as
the monitored phone. The mapping between the phone B status and the BLF key on
phone A is as follows: