User's Manual

User Manual 5 Using the eSpace 6830
29
If the SIP server is configured, a direct IP-IP call still works. If you use the
STUN, the direct IP-IP call also uses the STUN. Set Use Random Port to
No when completing direct IP calls.
Answering a Call
z
An incoming call: The phone rings. The corresponding account LINEx blinks. Pick
up the handset, press
, enable the headset, or press the blinking LINEx key to
answer the call.
z
Multiple incoming calls: The call waiting tone is played. The next available line
will blink in red. Answer an incoming call by pressing the LINEx key.
Do-Not-Disturb
To block all incoming calls, you can enable the Do-Not-Disturb (DND) function. The
phone will not ring when an incoming call comes.
Method 1: When the phone is in idle mode, press DND to enable the DND function and
press DND again to disable the DND function.
Method 2: Toggle the DND function as follows:
Step 1
Press
MENU
.
Step 2
Select
Preference
by pressing the arrow keys, and then press
MENU
.
Step 3
Select
Do Not Disturb
by pressing the arrow keys and press
MENU
.
Step 4
Select
Enable DND
or
Disable DND
and press
MENU
.
Call Waiting/Call Holding
z
Hold: Keep a call on hold by pressing HOLD.
z
Resume: Resume the call by pressing the corresponding LINEx key with a blinking
LED.
z
Multiple calls: Automatically keep an active call on hold by selecting another
available LINEx key or answering another call. If an incoming call comes when all
lines are in use, the call waiting tone (discontinuous tone) is displayed.
Muting
To enable or disable the muting function during a call, press MUTE. Then "LINEx:
MUTE" is displayed on the LCD for the muted call.
Call Transfer
The eSpace 6830 supports both blind and attended (or supervised) transfer: