eSpace EGW1530B Enterp prise Gateway V100R001C01 Quick Start eSpace EGW1530B 企业网 网关 V100R001C01 快速入门 Issue:03 Part Number:31505386 Date:2012-09-12 文档版本：03 文档版本：31505386 发布日期：2012-09-12 HUAWEI TECHNOLOGIES CO., LTD.
Welcome Welcome to eSpace EGW1530B Enterprise e Gateway (EGW1530B). This document describes how to install and configure the EGW1530B. E For more information, please refer to the eSpace EGW1530B Enterprise Gateway Product Documentation provided in the CD-ROM delivered with the device. Usage Notice z z z z Keep the power plugs clean and dry to avoid electric shock and other potential risks. w this product. Use the power supply adapter provided with Keep your hands dry when plugging in out the device cable.
Installation 1 Preparing Installation Tools Phillips screwdriver Claw hammer Hammer drill Level ruler 2 Installing the EGW1530B Install the EGW1530B on a horizontal surfacce or on a wall. z Installing I t lli the th EGW1530B on a horizontal h i t l surface f iis easy. Y You only l need d tto place l it on the surface and leave 10 cm space arround for heat dissipation.
Configuring the EGW1530B B Scenario Description This chapter describes the Internet access and a voice functions of the EGW1530B. The EGW1530B supports Internet access throug gh ADSL or WAN. In WAN mode, three methods are available: account and passwo ord, static IP, and DHCP. For the specific Internet access mode and data, contact you ur local network carrier.
Starting Configuration ——Netwo orking on a Planning Network Access Informatio Item Parameter Account Planning Description PPPoE user name PPPoE password WAN IP address WAN Static IP WAN subnet mask WAN gateway IP address Primary DNS server DHCP PVC Identifier (VPI) ADSL ADSL and WAN are available. The WAN modes include the account, static IP, and DHCP submodes. To obtain the network access mode and data, contact the local network carrier.
Starting Configuration —— Indep pendent IP PBX a Planning Users' Internal Numbers Analog phones, fax machines, IP phones, an nd IADs can be connected to the EGW1530B. You are advised to connect faxx machines to the EGW1530B through the PHONE port. When the EGW1530B functions as an indep pendent IP PBX, users can dial the outgoing prefix plus the called number to ma ake an outgoing call, and the call is routed through the FXO ports or BRI ports.
Configure an IP phone. The following desscribes how to configure an eSpace 78xx IP phone. For details about other models, se ee the appropriate administrator guide. 1. Enter the IP address of the IP phone in i the address box of Internet Explorer(You can click OK on the IP phone to view the IP address of the IP phone). default values: admin) of the administrator 2. Enter the user name and password (d and click Log In to access the web management page. 3. Click the Account tab.
c Planning User Numbers Analog phones, fax machines, IP phones, an nd IADs can be connected to the EGW1530B. You are advised to connect faxx machines to the EGW1530B through the PHONE port. NOTE z The ID of the registration group corresponnding to an external number of a user must be the same as that of the the trunk registration user u ID. If the trunk registration user ID starts with +, you need to change + to 00 when youu configure an external number. z Internal numbers can be customized.
2. Enter the user name and password (d default values: admin) of the administrator and click Log In to access the web management page. 3. Click the Account tab. Set Register Name N to the user number of the IP phone based on the data plan in step c . Se et SIP Server to 192.168.1.1 (default IP address of the LAN port on the EGW1 1530B). 4. Click Submit to finish IP phone config guration.
b Starting Configuration m Configure the data synchronization 1 On the SIP server page, enable the UC mode. server based on the data plan in step a . 2 Click Add. Configure the SIP server baseed on the data plan in step a and click Next. 3 Click Finish. You can choose Voice > Phone Allocatiion in the web management system of the EGW1530B to view the synchronized use er number.
Seeking Technical Support and Obtaining O Documentation Technical support Contact the device supplier to obtain tech hnical support. Documentation Obtain documentation from the CD-ROM delivered with the device or choose SUPPORT > Products > UC&C > UC > UC in http://enterprise.huawei.com to obtain documentation.
