User's Manual

16
Entering the PIN Code
When the PIN verification is enabled, you need to enter the correct PIN code to use the
network-related functions.
1. After the Mobile Partner is launched, the Enter PIN dialog box is prompted.
2. Enter the correct PIN code.
3. Click OK to complete the verification.
Note:
y If you enter wrong PIN codes for a preset number of times, the UIM card is
locked and you cannot use it until you enter the PUK code. The Mobile Partner
prompts you the remaining number of attempts for entering the PIN code or the
PUK code.
y When the UIM card is locked, you can still dial emergency numbers.
Unlocking the PIN
1. When the UIM card is locked, the Unlock PIN dialog box is displayed after you start
the Mobile Partner.
2. Enter the correct PUK code.
3. Enter the new PIN code.
4. Click OK to complete the modification.
Choosing a Device
The Mobile Partner can support different terminal products.
When the Mobile Partner is launched, it searches the matched terminal automatically. If two
or more terminals are found, the connected terminals are displayed on the Choose Device
interface. You can choose a terminal to run and click OK.
If two or more supported terminals are connected with the PC, you can change or choose a
device during the running of the Mobile Partner.
1. Choose Tools > Choose Device.
2. Select a device in the device list.
3. Click OK to terminate the current terminal and switch to the selected one.
Viewing Diagnostics Information
Choose Tools > Diagnostics to view the information of the Mobile Partner, such as the
number of messages and contacts, firmware version, hardware version, and IMSI number.