DAU eA300-8a Quick Installation Guide HUAWEI TECHNOLOGIES CO., LTD.
Install the DAU eA300-8a（Mounting on a Utility Pole） Insert the two hose clamps into the sheet-metal mounting bracket. Install the hose clamps on the utility pole and adjust the length of the hose and fix it. The installation is complete. 2-a Loosen the bolt of hose clamps. 2-b Adjust the length of the hose clamps. 2-c Fasten the bolt of hose clamps to fix the length of the hose clamp. 2-d Use the M6 hex key to tighten the bolt and fix the hose clamps completely.
Install the DAU eA300-8a（Mounting on the Wall） Remove the sheet-metal mounting Bracket and install the wall mounting frame. Mark the fixing points. Install the expansion bolt. Fix the eA300-8a on the wall-mounting frame. Fix the wall-mounting frame to the wall.
Huawei Technologies Co., Ltd. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support_e@huawei.
Install the Cables of DAU eA300-8a Install the POE Network Cable Make the POE Network Cable Strip the cable Distribute the wires Strip the PET A ssembl e t h e f erru les and cu t t h e su rpl us cabl es Cut the unnecessary rip-cord Inser t t he net w or k cable int o t he cr yst al connect or . Use t he cr imping t ool t o pr ess t he cr yst al connect or Notice：Donot press the outer-jacket into the crystal connector. For more details, please refer to “eA300-8a DAU User Guide”.
Safety Information ■ Following All Safety Precautions Before any operation, read the instructions and precautions in this document carefully to minimize the possibility of accidents. The Danger, Caution, and Note items in the documents do not cover all the safety precautions that must be followed. They only provide the generic safety precautions for operations.
FCC warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
