User's Manual

Thank you for purchasing the CPE. This CPE brings you a
high speed wireless network connection.

This document will help you understand your CPE so you can start using it right away.
Please read this document carefully before using your CPE.
For detailed information about the functions and configurations of the CPE, refer to the
online help on the web management page that comes with the CPE.
Note:
You must install Adobe Reader version 6.0 or higher to read the online help.
Packing List
The following items are included in your CPE package. If any items are missing or damaged,
please contact your local dealer. If any of the optional accessories are not included in the
package, you can contact an authorized dealer to purchase them separately.
Item Quantity
LTE CPE 1
Power adapter 1
Quick Start Guide 1
Safety Information 1
Network cable 1
Battery (optional) 1
External antenna 1
Getting to Know Your CPE
Note:
The CPE function descriptions and illustrations in this document are for your reference
only. The product you have purchased may vary.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
18
15
17
Ბ
Ბ
1
Power indicator
z Steady blue: The device is powered on. The power adapter is in use and working
properly, or the power adapter is not in use but the battery level is high.
z Alternating blue and pink: The device is powered on. The power adapter is not in use
or not working properly, and the battery level is low.
z Steady pink: The device is malfunctioning.
Note:
If your device malfunctions, power it off. Wait at least 15 minutes before you power it
on again. If the problem persists, contact your dealer.
z Off: The device is powered off.
Ბ
2
WLAN indicator
z On: WLAN function enabled
z Blinking: Transmitting data through WLAN
z Off: WLAN function disabled
Ბ
3
WPS indicator
z On: WPS function enabled
z Blinking: WPS interconnection verification is in progress. This process should not take
longer than 2 minutes.
z Off: WPS function disabled
Ბ
4
LAN indicator
z On: The port is connected to a device.
z Blinking: Data is being transmitted through the port.
z Off: No device is connected to the port.
Ბ
5
Voice indicator
z On: Off-hook condition
z Blinking: Incoming call
z Off: On-hook condition
Ბ
6
Signal indicator
z On: Indicates network signal strength. Full light indicates strong signal.
z Off: No network signal.
Ბ
7
WLAN button
Press and hold for more than 2 seconds to enable or disable the WLAN function.
Ბ
8
Reset button
Press and hold for more than 2 seconds to restore the device to its factory settings.
Note:
Restoring the default settings of the CPE will override all the previous settings.
Ბ
9
WPS button
After the WPS function is enabled, press and hold this button for more than 2 seconds to
initiate WPS interconnection.
Ბ
10
External antenna port
Connect to an external antenna.
Ბ
11
Power button
Press this button to power the device on or off.
Ბ
12
Power port
Connect to the device's power adapter.
Ბ
13
LAN port
Connect to computers, switches, or other network devices.
Ბ
14
TEL port
Connect to a phone.