HUAWEI E510 HSPA/DVB-T USB Modem Quick Start
Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice.
Table of Contents Getting to Know the E510.................................................................................................. 1 Requirements for the PC..................................................................................................... 4 Preparing the E510............................................................................................................. 5 Installation Guide .............................................................................................
Thank you for purchasing Huawei E510 HSPA/DVB-T USB Modem. Note: This manual briefly the preparation, the process for installing/uninstalling, and safety precautions for using Huawei E510 HSPA/DVB-T USB Modem (hereinafter referred to as the E510). You are recommended to read the manual before using the E510. Getting to Know the E510 The following figures show the appearance of the E510. The actual product may differ.
Internal Antenna You can pull out the internal antenna as shown in the following figure. To receive stronger signals, you can adjust the direction of the internal antenna. 2 1 Mini-USB interface You can connect the mini-USB connector of the USB extension cable to the mini-USB interface. USIM/SIM card slot Holds the USIM/SIM card.
External antenna interface Connects an external antenna. You can pull out the external antenna as shown in the following figure. To receive stronger signals, you can adjust the direction of the rotatable external antenna. Note: The internal and the external antennas cannot be used at the same time. When the external antenna is connected to the E510, you are not recommended to pull out the internal antenna. It is recommended to use the external antenna at the site with weak signals.
5 Indicator Indicates the status of the E510. Green, blinking twice every 3s: The E510 is powered on. Green, blinking once every 3s: The E510 is registered to the GSM/GPRS/EDGE network. Blue, blinking once every 3s: The E510 is registered to the WCDMA/HSDPA/HSUPA network. Green, always on: The GPRS/EDGE connection is set up. Blue, always on: The WCDMA connection is set up. Cyan, always on: The HSDPA/HSUPA connection is set up. Off: The E510 is removed from the PC.
Preparing the E510 Install the USIM/SIM card Insert the USIM/SIM card into the card slot. Make sure that the USIM/SIM card is properly inserted. Connecting the E510 with a PC Note: Power on your PC before connecting the E510 with the PC. Otherwise, the normal installation of the E510 may be affected. The following figure is sketches of the USB extension cables.
1 2 3 Auxiliary USB power cable Main-USB extension cable Mini-USB connector 1. Connect the Mini-USB connector to the E510. 2. Connect the USB connector(s) to the USB interface(s) of the PC. Note: When you enjoy the data service and the TV service simultaneously, connect the USB extension cable with two USB connectors to the PC, for sufficient power.
Installation Guide The procedure for installing the management program depends on the operating system installed on your PC. The following section takes Windows XP as an example. Installing the E510 1. Connect the E510 and the PC with the USB cable. 2. The OS automatically detects and recognizes new hardware and starts the installation wizard. If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3.
Uninstalling the Management Program 1. 2. Choose Start > Control Panel. Find the management program, and click Add/Remove Program to uninstall the management program. Note: It is recommended to restart the PC after the uninstallation to ensure that the management program is completely uninstalled. Removing the E510 1. 2. 3. Double-click in the system tray. The Unplug or Eject Hardware interface is displayed. Select the hardware related to the E510 and click Stop.
Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it causes danger or interference with electric devices. Medical Device Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities. Some wireless devices may affect the performance of the hearing aids.
Area indicated with the "Power off bi-direction wireless equipment" sign Area where you are generally suggested to stop the engine of a vehicle Traffic Security Observe local laws and regulations while using the wireless device. To prevent accidents, do not use your wireless device while driving. RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.
RoHS Approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive). Laws and Regulations Observance Observe laws and regulations when using your wireless device. Respect the privacy and legal rights of the others. Care and Maintenance It is normal that your wireless device gets hot when you use or charge it.
Communication Commission Interference Statement SpecificFederal Absorption Rate (SAR) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant of the and FCCreceiver. Rules.It isThese limits designed to for provide Your wireless devicetois aPart radio15 transmitter designed not toare exceed the limits reasonable harmfulbyinterference a residential installation. This equipment exposure to protection radio wavesagainst recommended internationalinguidelines.
Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang Shenzhen 518129 People's Republic of China Website: www.huawei.