Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice.
Table of Contents What Is in Your Package ..............................................................................................1 Getting to Know Your E156 ..........................................................................................2 Preparation ................................................................................................................5 Installation/Removal Guide ..........................................................................................
Thank you for choosing Huawei E156 HSDPA USB Stick (hereinafter referred to as the E156). With the E156, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance, installation and removal of the E156. For the operation of the management program, refer to the User Manual.
Getting to Know Your E156 The following figure shows the appearance of the E156. It is only for your reference. The actual product may differ. 1 2 3 6 4 5 ΠUSB Interface It connects the E156 to a computer.
• SIM/USIM Card Slot It is where you insert the subscriber identity module/UMTS subscriber identity module (SIM/USIM) card. Ž Micro SD Card Slot It is where you insert the Micro Secure Digital Memory (SD) card • RF testing slot It connects the RF test cable for RF testing. • Strap Hole ‘ Indicator It indicates the status of the E156. Colour Status Green Blinking (on for 100ms and off for 100ms; then on for 100ms and off for 2700ms) The E156 is powered on.
Cyan On The E156 is connected to a HSDPA network. - Off The E156 is removed.
Preparation Requirements for the Computer To use the E156, the computer should meet the following requirements: n USB Type A Receptacle, Compatible with USB 2. 0 High Speed. n Windows 2000 SP4, Windows XP SP2, Windows Vista. n Your computer’s hardware system should meet or exceed the recommended system requirements for the installed version of OS. n Resolution for the display: 800 × 600 or above. Getting Your E156 Ready 1. Remove the USIM/SIM card slot from the E156. 2.
Inserting the Micro SD Card (Optional) Insert the micro SD card into the E156, as shown in the following figure. Note: Do not remove the micro SD card when it is being used. Removing the card during an operation may damage the micro SD card as well as the device, and data stored on the card may be corrupted.
Installation/Removal Guide On different operating systems (OSs), the installation and removal procedures may differ. Follow the system prompts during operation. Connecting the E156 with a Computer Note: First, power on the computer. Then connect the E156 with the computer. Otherwise, the E156 cannot be installed as normal. 1. Plug the E156 into the USB interface of the laptop or desktop computer. You can connect the E156 to a laptop or desktop computer using the USB cable for better signals.
2. The OS automatically detects and recognises new hardware and starts the installation wizard. 3. Follow the prompts of the installation wizard. 4. After the program is installed, a shortcut icon for the E156 management program is displayed on the desktop. Starting the Management Program After the E156 is installed, the management program is launched automatically. Then every time the E156 is connected to the PC, the management program is launched automatically.
Note: Before removing the management program, exit the management program.
Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device n Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities. n Some wireless devices may affect the performance of the hearing aids.
metal powder) n Area indicated with the "Explosives" sign n Area indicated with the "Power off bi-direction wireless equipment" sign n Area where you are generally suggested to stop the engine of a vehicle Traffic Security n Observe local laws and regulations while using the wireless device. To prevent accidents, do not use your wireless device while driving. n RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.
WEEE Approval The wireless device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS Approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive). Laws and Regulations Observance Observe laws and regulations when using your wireless device.
n Use only accessories of the wireless device approved by the manufacture. Contact the authorized service center for any abnormity of the wireless device or accessories. n Do not dismantle the wireless device or accessories. Otherwise, the wireless device and accessories are not covered by the warranty. Emergency Call This wireless device functions through receiving and transmitting radio signals. Therefore, the connection cannot be guaranteed in all conditions.
Federal Communications Commission Notice (United States): Before a wireless device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. FCC Statement In the United States and Canada, the SAR limit for mobile devices used by the public is 1.6watts/kg (W/kg) averaged over 1 gram of tissue for the body or head (4.
may void the FCC authorization to operate this equipment. 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Acronyms and Abbreviations EDGE Enhanced Data Rates for GSM Evolution GPRS General Packet Radio Service GSM Global System for Mobile Communications HSDPA High Speed Downlink Packet Access OS Operating System PIN Personal Identification Number SAR Specific Absorption Rate SIM Subscriber Identity Module UMTS Universal Mobile Telecommunications System USB Universal Serial Bus USIM UMTS Subscriber Identity Module WCDMA Wideband Code Division Multiple Access 16
Version: V100R001_01 Part Number: 31019580 17
