DS363 Satellite Digital TV Set-Top Box User Guide (Version 01) HUAWEI TECHNOLOGIES CO., LTD.
Contents 1 Warnings and Precautions ....................................................................... 1 2 Packing List ............................................................................................... 4 3 Panels ......................................................................................................... 5 3.1 Front Panel .......................................................................................................... 5 3.2 Rear Panel ................................
8 Basic Operations ..................................................................................... 24 8.1 EPG....................................................................................................................24 8.2 Viewing the Program Information Banner......................................................24 8.3 Displaying the program list ..............................................................................25 8.4 Recording and playback .......................................
1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.
Areas with Inflammables and Explosives Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in the same box as inflammable liquids, gases, or explosives. Accessory Requirements Use only the accessories supplied or authorized by the device manufacturer.
Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell. Environmental Protection Do not dispose of the device and the accessories in a garbage can. Dispose of the device according to the local regulations on disposing of packing materials, exhausted batteries and abandoned devices, and support the recycling activity.
2 Packing List The following table lists the accessories in the product package. No. Item Quantity 1 Set-Top Box 1 2 Remote control 1 3 AA batteries 2 4 Power adapter 1 5 AV cable 1 6 User Guide 1 If you find any item missing or damaged, contact your service provider.
3 Panels The figures of the set-top box (STB) shown in the following sections are only for your reference. The actual appearance may differ slightly from that shown depending on the product you purchased. 3.1 Front Panel 50 0m AM a x 8 1 2 3 4 5 6 9 10 11 12 7 No. Item Description 1 USB interface Connect a USB storage device. 2~3 Left/Right button 4~5 Up/Down button 6 MENU button 7 OK button Confirm a selected option.
3.2 Rear Panel L N B IN 300m A M ax 1 2 3 4 5 6 7 8 No. Item Description 1 LNB In interface Connect a satellite antenna cable to the STB to receive satellite signals. 2 CH3/CH4 interface Connect the coaxial cable to the STB to send analog video signals to your TV. 3 LOOP OUT interface Connect the coaxial cable to the STB to send satellite signals to another STB. 4 VIDEO interface Connect the video cable to the STB to send analog video signals to your TV.
4 Remote Control 4.1 Appearance 22 1 21 2 20 19 18 17 3 16 4 5 6 7 15 8 14 9 10 11 12 13 Upgrading the STB may lead to some changes in the functions of remote control keys. For specific functions, see the instructions provided on the user interface (UI). When using the STB, do not expose the STB's infrared signal receiver to direct sunlight. The figures of the remote control shown in this document are only for your reference.
4.2 Keys and Functions No. Item Description 1 The red indicator Flash red when you press the keys in the TV learning. 2 Learning keys Learn some key features of the TV remote control. 3 Function keys For more information about the color keys, see the instructions provided on the user interface. 4 INFO key Display information available on shows. OK key Select (Enter) a menu or Confirm a selected option. 5 Navigation keys Move the cursor. Adjust the volume by the left or right key.
No. Item Description 19 AUDIO key Switch the audio feed for the channel (when available). 20 MUTE key Mute or unmute the STB. 21 STANDBY key Switch the STB between active and standby modes. 22 The green indicator Flash when you press the remote control keys (but the learning keys). 4.3 Learning function If you don’t press any button or send a signal in 10 seconds, it will quit from learning mode automatically. There are only 4 keys in the TV learning with learning function.
learn all the keys, press the STUDY key to save the present setting and exit the learning mode. 5 Connecting Cables Before connecting or disconnecting a cable, power off the STB, TV and all the devices connected to them. Before connecting, check that all the necessary cables are available. Then connect the cables as shown in the following figures. Do not plug or unplug a cable when a device is powered on. The figures shown in the following sections are only for your reference.
Step 3 Connect the video and audio cable's yellow, white, and red connectors at the other end to your TV's corresponding video and audio interfaces. Step 4 Use the power adapter to connect the STB's DC IN interface to a working power socket, extension cord or surge protector. 5.2 Using the Coaxial Cable Antena A B L EI L N B IN 300m A M ax Step 1 Use a satellite antenna cable to connect a dish to the STB's LNB in interface. Step 2 Connect one end of a coaxial cable to the STB's CH3/CH4 interface.
5.3 Using the HDMI Cable Antena A B L EI L N B IN 300m A M ax Step 1 Use a satellite antenna cable to connect a dish to the STB's LNB in interface. Step 2 Connect one end of an HDMI cable to the STB's HDMI interface. Step 3 Connect the other end of the HDMI cable to your TV's HDMI interface. Step 4 Use the power adapter to connect the STB's DC IN interface to a working power socket, extension cord or surge protector.
6 Inserting the Smart Card To prevent damage to the STB or the smart card: Do not insert or remove the smart card when STB is powered on. Do not frequently insert or remove the smart card. L N B IN 3 0 0 m A M a x Step 1 Record the serial number that appears in the back of your smart card. Step 2 Call the local service providers to activate the service. Step 3 Insert the smart card. Insert the smart card with the metal chip facing downwards into the smart card slot of the STB.
7 Main Menu Overview 7.1 Accessing the Main Menu Press MENU to access the main menu, which includes the following sub-menus: Channel Management: manage the programs. Record Management: manage the record. System Installation:search programs. System Setup:set up the system properties. CA Menu: set up the CA properties. Information:view detail. the 7.2 Channel Management 1. Select the Channel Management. 2. Press OK to access the sub-menu. 3. Input the default pins(000000).
Press OK to management the Record. 7.3.1 Record When you select the Record, it will display the information of record list. Press OK to enter the selected file. Press MENU to return to the last viewed guide. 7.3.2 Scheduled When you select the Scheduled, you can easily set the recording reservations for future programs. Press OK to edit the parameters of a reservation. Press MENU to return to the last viewed guide. Press Function key (red) to delete one recording reservation.
Press OK to edit the parameters. Press MENU to return to the last viewed guide. Timeshift Size: set the time segment of the pause live TV (PLTV). Instant Skip Size: set the time segment of the step. 7.3.4 Disk Info When you select the Disk Info, you can view the information of the USB storage device. Press MENU to return to the last viewed guide. USB storage device with capacity of more than 10 GB in order to meet the recording requirements. USB storage devices below USB 2.
Press OK to format a USB storage device. Press MENU to return to the last viewed guide. 7.3.6 Remove Disk When you select Remove Disk, you can remove the USB storage device safely. Press OK to remove the USB storage device safely. Press MENU to return to the last viewed guide. 7.4 System Installation 1. Select the System Installation. 2. Press OK to access the sub-menu. Press OK to search for programs. 7.4.
When the frequency of signal sound becomes faster and the parameter value of quality and strength are more than 65%, then press OK to start search the programs. Press MENU to return to the last viewed guide. 7.5 System Setup 1. Select the System Setup. 2. Press OK to access the sub-menu. Press OK to configure system properties. 7.5.1 Time Date When you select the Time Date, you can view the information of the time and date. Press MENU to return to the last viewed guide. 7.5.
7.5.3 OSD When you select the OSD, you can change the information of the transparency and language. Press OK to edit the parameters the first,press OK to save the parameters again. Press MENU to return to the last viewed guide. 7.5.4 Factory Reset When you select the Factory Reset, you can restore the default settings. The default pins is 000000. Press OK to restore the settings. Press MENU to return to the last viewed guide. 7.5.
7.5.6 USB Upgrade If you want to upgrade the software for STB through USB disk, you can select the USB Upgrade. Press MENU to return to the last viewed guide. Users or maintenance staffs who obtain the USB disk upgrade file from the local service providers could use this method to upgrade the software. 7.6 CA Menu 1. Select the CA Menu. 2. Press OK to access the sub-menu. Press OK to configure CA properties. 7.6.1 Email When you select the Email, you can watch the information of the Email.
7.6.2 Card Status When you select the Card Status, you can watch the information of the Smart card. Press OK to show more details of the Smart card. Press MENU to return to the last viewed guide. 7.6.3 Password Mgmt. When you select the Password Mgmt., you can change the passwords. The password requirement is 6 digits. If you forget your new password, please contact the local service providers. Press OK to edit the passwords. Press MENU to return to the last viewed guide. 7.6.
7.6.5 Pairing When you select the Pairing, you can view the pairing information between the smart card and STB. Press OK to start pairing. Press MENU to return to the last viewed guide. 7.7 Information 1. Select the Information. 2. Press OK to access the sub-menu. Press OK to display details. 7.7.1 System Info When you select the System Info, you can view the information of STB. Press MENU to return to the last viewed guide.
7.7.2 Reminder When you select the Reminder, you can view the TV programs that you have reserved. Press MENU to return to the last viewed guide.
8 Basic Operations 8.1 EPG 8.1.1 Program Guide Press EPG to display the program guide that provided scheduling information for upcoming programs in a week on full screen with no banner. Press Function key (red) to view programs in previous day. Press Function key (green) to view programs in next day. Press Function key (yellow) to reserve the program. Press OK to play the program. 8.1.2 Setting a Reminder 1、 Press EPG to enter the EPG interface.
For more information of the currently program please press INFO twice. 8.3 Displaying the program list Press OK to display the program list on full screen. If you set favorite programs, press favorite programs. or to switch to the list of 8.4 Recording and playback 8.4.1 Recording the program Please use only the USB storage device which was formatted with FAT32 file system. Please do not frequently plug or unplug the USB storage device.
Press REC to instantly record the current program. Press OK to save the edited parameter, then starts recording the program. Press MENU to exit the setting interface, then you can watch TV. Please prepare a dedicated USB storage device to store recorded programs for the STB, we do not recommend that you use it to connect to a computer or other devices. You can record programs using the STB even when it is in standby mode. 8.4.
Press to freeze live TV. Then press to continue watching TV again. 1 Play time 2 Present time of time shift 3 Total time of time shift The STB may require a longer time to read large amounts of data stored in a USB storage device. If the USB storage device does not work properly, you can remove it safely then reconnect it again. How fast a USB storage device is detected differs from device to device.
9 Troubleshooting The following table lists the common STB problems and their possible causes and solutions. Problem Possible Cause Solution The standby indicator on the front panel does not turn on. The power adapter is not correctly connected. Correctly connect the power adapter to the STB, and then plug the power adapter into a power outlet. There is no audio or video when the STB is powered on. The video and audio cable is not correctly connected.
Problem Teleview Rating is not enough Possible Cause smart card is set too low. Solution Rating. Pop-up Tip: STB is not in working hours The time is not on the working hours of smart card. Please change the working hours of the smart card. STB automatically enter the upgrade interface When you open STB. The software of STB has been damaged Please contact the local service provider.
10 Specifications The product specifications are subject to changes without notification. Tuner and Demodulator Parameter Specifications Input Frequency Range 950 MHz to 2150 MHz RF Input Signal Level -25 dBm to -65 dBm RF Impedance 75Ω LNB Power 13/18 V DC, Max 350 mA LNB Tone Switch 22 kHz +/-2kHz, 0.6 Vpp +/-0.
Port Specifications Video RCA (CVBS) Audio RCA (Audio L,R) Environmental Parameter Specifications Input Voltage DC- IN 12V (Power Adapter) Power Consumption < 24W Dimension (L × W × H) About 248 mm × 132 mm × 45 mm Weight About 0.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice The information in this document is subject to change without notice.
This product incorporates open source software components covered by the terms of third party copyright notices and license agreements contained below. Kernel 2.6.18_7.7: Copyright(C) The Kernel.Org Organization,Inc. GNU General Public License:http://www.kernel.org Busybox 1.11.1: Copyright (C) 1999-2004 by Erik Andersen. All rights reserved. Copyright (C) 2005-2006 Rob Landley. GNU General Public License:http://www.busybox.net Zlib 1.1.4/0.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.