C7500 CDMA 1X Mobile Phone and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. The information in this document is subject to change without notice.
Copyright © 2009 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders.
Your Phone Earpiece Stylus Pen Screen OK Key Right Soft Key Navigation Keys Left Soft Key End/Power Key Talk/Send Key Charger Interface/ Data Cable Connector Headset Jack 1
Keys and Functions Press… To… z z z z z Power on or off the phone (by pressing and holding it). End a call or reject an incoming call. Return to the home screen. View the call log in the standby mode. Make or answer a call. z Display the Menu interface in the standby mode. z Confirm a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen.
Screen Icons Icon Description Network signal strength Icon Description Battery power level No network signal General profile roaming Silence profile MMS received Meeting profile Bluetooth actived Outdoor profile Message received My profile 1 Memory for messages full My profile 2 Urgent message received Alarm clock on 1
Menu Tree Contacts 1 Search 2 Search by Location 3 Add New 4 Groups 5 Speed Dial 6 My Number 7 Management Messages 1 Create Message 2 Inbox 3 Outbox 4 Drafts 5 Voice Mail 6 Templates 7 Recipient List 8 My Folder 9 Settings 0 Delete All Profiles Profiles 1 General 2 Silence 3 Meeting 4 Outdoor 5 My Profile 1 6 My Profile 2 1 All Calls 2 Missed Calls 3 Received Calls 4 Dialled Calls 5 Call Memo 6 Call Duration 1 Automatic Tuning 2 Manual Tuning 3 Fine Tuning 4 Set Frequency (Options when some channels save
Installing the Battery Removing the Battery Make sure that your phone is powered off. Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2. Connect the charger to an alternating current (AC) power socket. 3. During the charging, the charging icon is displayed in the animated status. When the charging icon becomes static, the phone is fully charged. 4. Disconnect the charger from the AC power socket.
Using the Stylus 1. A stylus can be used to click and drag: Click: Use the stylus tip to touch the screen once to select an item or access a menu. Drag: Press the stylus tip onto the screen, and then move the stylus to select several characters. 2. If you are using the phone for the first time, adjust the phone display as follows: Choose Menu > Settings > Display settings > Display adjustment.
To make an international call, press "*" twice to enter the international long distance code of "+". Then enter the number to be dialled, in the format of "country code + region code + phone number". z To call a number with an extension, press "*" three times to insert "P" or press "*" four times to insert "T" between the phone number and the extension. 2. Press to dial the number. 3. Press to end the call.
Phone Lock The phone lock protects your phone from unauthorized use. The default phone lock code is 000000. You can change it into any numeric string of 4 to 8 digits. If the phone lock is enabled, you need to enter the correct phone lock code when the phone is powered on. PIN and PUK The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the blocked PIN. Both PIN and PUK are delivered with the UIM card.
Changing the Text Input Modes The indicator of the current text input mode is displayed on the screen. Note z In editing mode, you can switch between keypad input and handwriting input by clicking the icons. z In the editing mode, select Clear once to delete the letter on the left of the cursor. Press and hold Clear to delete all the letters at a time. Handwriting Text Input In handwriting input mode, you can input Chinese and English characters and numbers by writing on the phone screen with a stylus.
Entering English (Abc) In the "Abc" input mode, press a key labeled with the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. Entering Numbers z z z In the "123" input mode, press a key labeled with the desired number. In the "Abc" input mode, press a key continuously or press and hold it until the desired number appears on the screen. In the "En" input mode, press a key and then press the desired number appears on the screen.
Warnings and Precautions Electronic Device z Power off your phone near high-precision electronic devices. The phone may affect the performance of these devices. z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Traffic Safety z Please observe local laws and regulations on phone use. Do not use your phone while driving to avoid traffic accident. z Secure the phone on its holder. Do not place the phone on the seat or other places where it can get loose in a sudden stop or collision. z Use the phone after the vehicle stops at a safe place.
Children Safety z Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. z Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous. z Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. Operating Environment z The phone, battery, and charger are not water-resistant. Keep them dry.
z z z z damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. Do not scratch the shell of the phone. Otherwise, the shed coating may cause skin allergy. Once it happens, stop using the phone at once and go to see a doctor. Keep the plug dry when you clean it, to prevent fire. If the phone or any of its fittings does not work, turn to the local authorize service center for help. Do not dismantle the mobile phone or accessories.
z z z z z z z If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help. If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin. If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt. Wash with clean water and go to see a doctor immediately.
z z When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused. Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. Certification Information (SAR) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD.
The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.870 W/kg, and when properly worn on the body is 0.947 W/kg. The SAR limit adopted by the CNIRP is 2.0W/kg over one gram of tissue. The value guarantees a safe distance to protect mobile phone users and the difference caused by measurement errors.
