Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO.
Conventions Term Conventions This manual refers to HUAWEI C6100 CDMA 1X mobile phone as "the phone" or "your phone". Operation Conventions Operation Meaning Press hold Press a key for two to three seconds and then release it. and Press Press a key and release it quickly. GUI Conventions Format Meaning Bold Any string displayed on the phone screen is in boldface, such as "Menu". > Multi-level menus are spearated by ">".
Contents 1 Getting to Know Your Phone............................................. 1 Your Phone...........................................................................................1 Keys and Functions..............................................................................2 Screen Icons .........................................................................................5 2 Menutree ............................................................................. 7 3 Getting Started ............
SMS ................................................................................... 18 Writing and Sending a Text Message ................................................18 Reading a Text Message ....................................................................19 7 Contacts ............................................................................ 21 Adding a Contact ...............................................................................21 Searching for a Contact.........................
Locking the Keypad...........................................................................34 13 Warnings and Precautions.............................................
1 Getting to Know Your Phone Your Phone 4 1 7 6 2 5 3 1 8
1 Earpiece 5 Charger interface/Data cable connector 2 Screen 6 Camera 3 Microphone 7 Strap hole 4 Headset jack 8 Speaker Keys and Functions 1 2 8 3 4 7 5 6 9 10 11 15 14 13 12 2
Talk/Send key z View the call log in standby mode. z Make a call or answer an incoming call. z Select the option displayed in the lower left corner 2 Left soft key of the screen. z Display Menu in standby mode. 3 Navigation Press the keys to scroll up, down, left, and right on keys the display. 4 Right soft key z Select the option displayed in the lower right corner of the screen. z Display Contacts List in standby mode. z Power on or off the phone (by pressing and 5 End/Power key holding it).
Sym key 13 Space key 14 A/a key 15 Fn key In text input mode, press this key to display the symbol list. In text input mode, press this key to enter a space. In text input mode, press this key to switch between upper case and lower case. In text input mode, press this key and another key to enter the upper character on the other key.
Screen Icons Icon Indicates… Signal strength. The more the bars are, the stronger the signal is. There is an incoming call; a call is being set up; there is an ongoing call. The SMS inbox is full. A new text message is received. A new voice mail is received. A new emergent message is received. The microSD card is properly installed. An alarm clock is enabled. The General profile is enabled. The Silence profile is enabled. The Meeting profile is enabled. The Outdoor profile is enabled.
Icon Indicates… The My Profile 2 profile is enabled. Battery power level. The more the bars are, the more the battery power is. The battery power level is extremely low.
2 Menutree 7
8
3 Getting Started Installing the Battery, UIM Card and microSD Card z z Install the microSD card properly to prevent your phone or microSD card from being damaged. Your phone can work with a microSD card of up to 8 GB. Charging the Battery To charge the battery, do as follows: 1. Connect the charger to the charger interface at the bottom of the phone.
2. Connect the charger to an AC power socket. During the charging, appears in the upper right corner of the screen in an animated status. 3. Wait until the phone is fully charged. When becomes static, the battery is fully charged. 4. Disconnect the charger from the AC power socket. 5. Disconnect the charger from the phone. z z Do not use a damaged battery or charger. Before charging the battery with the travel charger, ensure that the battery is installed in your phone.
z Press to select a submenu, and then press (Select) or to display the selected submenu. z Press the number key corresponding to the serial number of a submenu to display the submenu. 5. Press (Back) to return to the previous menu or exit the function menu. To return to the standby mode, press .
4 Voice Services Making a Call 1. In standby mode, enter the phone number. z To make an international call, press to enter a plus sign (+). Then enter the international long-distance code, country code or region code, area code, and phone number in sequence. z To call an extension, enter the phone number, press three times consecutively to insert P or press four times consecutively to insert T, and then enter the extension number. 2. Press 3. Press z z to dial the number. or (End) to end the call.
Answering a Call When there is an incoming call, you can press to answer it; press or to reject it. , (Answer), z When there is an incoming call, you can press (Silence) to (Reject) again to reject it. If mute the speaker, and then press the phone is in Silence mode, you can press (Reject) to reject it. z If the any-key answer function is enabled, you can press any key except and to answer an incoming call.
mute/unmute the ringtone. z Start Record: allows you to record the call. You can select This Side or The Other Side. z Save Number: allows you to enter a phone number and save it to the phonebook. z Contacts: allows you to search for or create a contact. z SMS: allows you to access the Messages screen. z Call Memo: allows you to access the Call Memo screen. z Voice privacy: allows you to set the privacy mode, including Standard and Enhanced.
5 Text Entry Text Input Modes The indicator of the current input mode is displayed in the upper left corner of the screen. You can press to change the input mode. Indicator Text Input Mode En Smart English input mode Abc Traditional English input mode 123 Number input mode In Smart Indonesian input mode In editing mode, press once to delete the character on the left to clear all of the cursor. Alternatively, press and hold characters at a time.
2. Based on the sequence of the word, press the key labeled with the desired letter once. Then the phone displays the commonly used words according to the numeric sequence of key presses. 3. Press to view alternative words. 4. Press or You can also press to confirm the selection. to confirm the selection followed by a space. z Press to enter a full stop or another commonly used punctuation. z Press z Press to display the symbol list. Then you can select and enter a symbol. to enter a space.
English input mode. For details, see "Entering English" on page 15. Entering Numbers z In "123" input mode, press the key labeled with the numbers. z In "Abc" and "En" input mode, press and then the key labeled with the numbers. Entering Symbols In any input mode, you can enter a symbol as follows: 1. Press 2. Press 3. Press to display a symbol list. to select a symbol. (Select) or enter the symbol.
6 SMS Writing and Sending a Text Message To write and send a text message, do as follows: 1. Select Menu > Messages > Create Message. 2. Write a text message with up to 160 English letters or 160 Indonesian z z z z z z z letters. When writing a text message, press (Options) for the following options: Send: allows you to send the message. Save: allows you to save the message to Drafts. Insert Quick Text: allows you to insert a commonly used phrase.
Select On and enter the phone number. 3. On the text editing screen, press or select Options > Send. 4. Enter the phone number of a recipient. Up to 100 recipients can be added by using one of the following methods: z Enter the phone number(s) directly. z Press (Search). Then select Contacts to select the phone number(s). z Press 5. Press (Search). Then select Groups to select a group. to send the message. Reading a Text Message To read a text message stored in the inbox, do as follows: 1.
message or the number of the message sender. z Extract URL: allows you to extract the URL address(es) contained in the message. z Copy To Phone/Copy to UIM card: allows you to copy the message to the UIM card or the phone memory. z Lock /Unlock: When a text message is saved in the phone memory, you can lock the message to prevent it from being deleted. To unlock the message, you can select Unlock.
7 Contacts Adding a Contact To add a contact, do as follows: 1. Select Menu > Contacts > Add New. 2. On the Edit screen, enter the information about the contact. z If the contact is saved in the phone memory, you can enter information in the following fields: Name, Mobile Number, Home Number, Office Number, Fax Number, E-Mail, Group, Notes, Custom Tone, Custom Image, and URL. (For each contact, at least one number needs to be entered.
z Add New: allows you to add a new contact. z Send Message: allows you to send a message to the contact. z Delete: allows you to delete the contact. z Copy To Phone/Copy to UIM card: allows you to copy the contact to the UIM card or the phone memory. z Call: allows you to call the contact. z Edit Before call: allows you to modify the number before you call it. To quickly search for a contact, you can enter the first letter of the contact name. Then the phone lists contacts that start with the letter.
8 Music Adding the Playlist 1. In standby mode, select Menu > Multimedia > Media Player to launch the media player. 2. Press (Options) and select Music Library to view the All Tracks. 3. Press (Options) and select Refresh to refresh the playlist. 4. On the All Tracks screen, press to select a song. Then press to add the selected song to the playlist. Press selection. again to cancel the 5. Select Options > Play to save and start playing the playlist.
z Press to play the previous song. z Press and hold to rewind the song. z Press to pause the song; press z Press to increase the volume. z Press to decrease the volume. again to continue playing. 2. Press (Minimize) to return to the Multimedia screen. You can use other functions while the phone is playing .mp3 files. 3. Press to return to the standby mode and the music is still playing. 4. On the Media Player screen, select Options > Off to switch off the media player.
z GUI style: allows you to select a GUI style that can be Simple Mode, Waveform Mode, or Lyric Mode.
9 Camera Taking a Photo 1. In standby mode, select Menu > Camera to access the preview mode. 2. Press (Options) for the following options: z Shot Mode: allows you to set the shot mode. If you select 4 Shots or 9 z z z z z z z Shots, the phone takes photos sequentially; if you select Normal, the multi-shot mode is disabled. Resolution: allows you to select a resolution. Frame: allows you to select a fun frame for photos.
z Set: allows you to set the photo as the wallpaper or a contact image. z In preview mode, you can press z In the upper left corner of the camera screen, the number 0–1000 indicates the approximate number of photo(s) that can be taken.1000+ indicates that the number of photos that can be taken is more than 1000. to adjust the brightness. Viewing a Photo 1. In standby mode, select Menu > Camera to access the preview mode. 2. Press (Options). Then select Goto My Files to access the photo folder. 3.
z File Info: allows you to view the name, size, resolution, and creation time of the photo.
10 Recorder Recording a Sound Clip 1. In standby mode, select Menu > Multimedia > Recorder. 2. Press to start recording. 3. Press (Back) to stop recording, with a prompt for confirmation being displayed. 4. Press (Yes) to save the sound clip to Menu > Gallery > Musics > recorder. Press (No) to return to the previous menu. z z During recording of a sound clip, if you press (Stop), the sound clip can be automatically saved to Menu > Multimedia > My Files > Musics > Recorder.
4. Press to select a sound clip and then press to play it, or press (Options) and select Play. 5. Press 6. Press z z z z z z z z z (Minimize) to view the sound clip list. (Options) for the following options: Play: allows you to play the sound clip. Set as: allows you to set the sound clip as the ringtone, contact tone, or SMS tone. Move To Memory Card/Move To Phone: allows you to move the sound clip to the microSD card or the phone.
11 Alarm Clock After an alarm clock is enabled, the phone notifies you at the specified time. You can set up to five alarm clocks. Enabling an Alarm Clock 1. Select Menu > Tools > Alarms. 2. Press to select an alarm clock. 3. Press z z z z (On) to turn on the alarm clock, or press following options: Title: allows you to set the title of the alarm clock. Time: allows you to set the time. Cycle: allows you to set the alert cycle (days). Ring: allows you to set the alert tone. 4.
z When the alarm clock alerts, press (Stop) to stop it or press (Snooze) to snooze it for five minutes. If nothing is done to the alarm clock when it alerts, it stops temporarily after 45-second ringing and alerts again five minutes later. The alarm clock alerts five times before it stops thoroughly. z If you select Cycle > Custom, press z to scroll from Sunday to select the days; press again to to Saturday and press deselect the days, and then press (OK) to confirm.
12 Security Enabling/Disabling the Phone Lock The phone lock protects your phone from unauthorized use. The phone lock function is not enabled when you purchase the phone. You can change the default phone lock code 000000 to any numeric string of 4 to 8 digits. 1. Select Menu > Settings > Security Settings > Phone Lock. 2. Select one of the following phone lock modes: z Immediate: Lock the phone immediately. z Power On: Enable the phone lock when the phone is powered on next time.
Locking the Keypad When the keypad is locked, you can still answer incoming calls or make emergency calls by pressing . Manually Locking the Keypad In standby mode, press and hold to lock the keypad. Automatically Locking the Keypad If the auto keyguard function is enabled, after the phone has been idle for a preset period of time in standby mode, the keypad is locked automatically. 1. Select Menu > Settings > Phone Settings > Auto Keyguard. 2.
13 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the mobile safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when it causes danger or interference with electronic devices.
storage, and distribution areas, and chemical plants. Also, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmosphere that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
z The device complies with the RF specifications when the device is used z z z z z near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned. On a thunder and stormy day, do not use your device when it is being charged, to prevent any danger caused by lightning.
Safety of Children Please comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may prove dangerous, as it may present a choking hazard. Make sure that small children are kept away from the device and accessories. Environment Protection Follow all the local regulations regarding the disposal of your devices or electrical accessories (such as chargers, headsets, or batteries).
may lead to electrolyte leakage, overheating, fire, or explosion. z If battery electrolyte leaks out, make sure that the electrolyte does not z z z z touch your skin and eyes. When the electrolyte touches your skin or splashes into your eyes, wash your eyes with clean water immediately and consult a doctor. If the battery is damaged, or the color changes or gets abnormally heated while you charge or store the battery, remove the battery immediately and stop using it.
z Do not leave your device, battery, or charger in a very hot or cold place. z z z z Otherwise, they may not function properly and may lead to a fire or an explosion. Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the device. Before you clean or maintain the device, power off the device and disconnect it from the charger.
of Electrical and Electronics Engineers Inc. (IEEE), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements.
Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
