User's Guide

10
Recording a Voice Clip
1.
In the standby mode, select Menu > Tools > Recorder.
2.
Press to start recording.
3.
Press (Stop) or to stop recoding.
4.
Press to play the voice clip.
All the voice clips are saved in the
Menu > Tools > Gallery > Voice
Folder
.
Switch
ing On the Radio
1.
Insert the headset to the headset jack properly.
2.
In the standby mode, select Menu > Radio. Or you can press and
hold to display the radio interface.
3.
Press to tune the channel.
4.
Press to adjust the volume.
Note
Your phone supports automatic playing of radio programs.
In the radio screen, press (Options) and select Auto
play. Then you can set the following parameters:
l Auto play on/off: You can enable or disable the auto-play
function.
l Channel: Press to access the channel list and select
your favorite channels to save.
l Auto play Time: You can set the time for auto play. If the
headset is connected to the phone, the phone plays the
radio programs automatically at the preset time.
l Cycle: You can set the cycle of auto play as once,
everyday, or any day in a week.