Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO.
Table of Contents 1 Your Phone ..................................................................................... 1 2 Keys and Functions........................................................................ 2 3 Screen Icons.................................................................................... 4 4 Menu Tree ...................................................................................... 5 5 Installing the SIM Card and Battery ...........................................
1 Your Phone Strap hole Earpiece Screen OK Key Right Soft Key End/Power Key Left Soft Key Call/Send Key Navigation Keys Number Key Headset Jack * Key Charger Interface # Key Microphone 1
2 Keys and Functions Press… To… z z z z z z z left soft key View the Call history in the standby mode. Make or answer a call. Power on or off the phone (by pressing and holding it). Silence the ringer when there is an incoming call (single press). Reject an incoming call (double press). End a call. Return to the standby mode. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen.
Press… To… z z – z z z z z z z z Enter numbers, letters and symbols. Access the voice mail in the standby mode (by pressing and holding the 1 key). Speed-dial phone numbers in the standby mode (by pressing and holding the 2-9 keys). Select a submenu item labeled with the corresponding number. Enter the * symbol. Enable or disable the Vibrate profile in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol.
3 Screen Icons Icon Description Network signal strength Icon Description Battery power level No network signal Calling Keypad locked Alarm clock on Domestic roaming General profile Overseas roaming Silent profile Memory for messages full Vibrate profile Call privacy enabled Outdoor profile Yellow, new message One Beep profile Voice mail received My Profile Urgent message received The earpiece function 4
4 Menu Tree Contacts Profiles Settings 1 Search 2 Add New 3 Groups 4 Speed Dial 5 My Number 6 Management General Silent Vibrate Outdoor One Beep My Profile 1 Phone Settings 2 Display Settings 3 Call Settings 4 Airplane Mode 5 Security Settings Messages Organiser & Tools Radio 1 Write Message 2 Inbox 3 Outbox 4 Drafts 5 Voice Mail 6 Templates 7 Settings 8 Delete All 1 My Files 2 Recorder 3 Alarms 4 Calendar 5 Calculator 6 Stopwatch 7 World Clock Access the radio Application Call Log Premium Serv
5 Installing the SIM Card and Battery Make sure that the golden area on the SIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. 6 Charging the Battery 1. Connect the charger to the charger interface at the right side of your phone. 2. Connect the charger to an alternating current (AC) power socket. 3. During charging, the battery icon displays a progression from empty ( ) to full ( ). 4. When the charging icon becomes static, the phone is fully charged.
7 Using the Function Menu 1. In the standby mode, press (Menu) or to display the Menu interface. 2. Press 3. Press to scroll to a menu item. (Select) or to display the menu. 4. Do the following to display the submenu: z Press or z Press the number key corresponding to the number of a submenu to display it. to scroll to a submenu item and press to display the submenu. (Select) 5. Press (Back) to return to the previous menu or quit the function menu. to return to the standby mode.
z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. z In the standby mode, press Select a record and press z Select a contact from the phonebook and press dial. z Select a message from the inbox and press dial. to view the call log. to dial. to to Answering a Call (Answer) or When there is an incoming call, press , to answer it, press to send SMS on call reject.
z z z z z z during the call. This function is available only after the call is set up. You can not mute/unmute the ringtone. Start Record: Allows you to record the call. Save Number: Allows you to enter a phone number and save it to the phonebook. Contacts: Allows you to search for or create a contact. Messages: Allows you to access the Messages menu. Call Memo: Allows you to record text memo during a call. Voice Privacy: Allows you to set the privacy mode, including Standard and Enhanced.
3. The phone automatically searches for channels and saves them to the channel list. Manual Tuning 1. In the radio screen, press (Options) to select Tuning. 2. Press to select Manual Tuning. 3. Press to tune from 87.5 MHz to 108.0 MHz. In the radio screen, you can press the channel and press or headset button to change to adjust the volume. FM recording Assume that certain channels are searched and saved already.
The indicator of the current text input mode is displayed on the screen. Press to change the input mode. z z In the editing mode, press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) to delete all the letters at a time. In the "En" input mode, press to enter a space. In the "Abc" input mode, press once to enter a space and twice to enter "0", press to move the cursor to the next line.
4. Press Press to enter the word. to enter the word and a space. 14 Entering English (Abc) In the "Abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. When you enter letters, press to switch between the uppercase and lowercase of the highlighted letter.
17 Entering Symbols 1. In any input mode, press 2. Press to display a symbol list. to scroll to the desired symbol. 3. Press the numeric key to enter the symbol. 18 Organiser & Tools Alarm Clock After an alarm clock is enabled, the phone notifies you at the specified time. You can set up to five alarm clocks. To enable an alarm clock, do as follows: 1. Select Menu > Organiser & Tools > Alarms. 2. Press to select an alarm clock. 3. Press or 4. Press (Edit) to set the alarm clock.
2. Select a desired date. to view the schedule, or select Options > Add Schedule to add a schedule. 3. Press Calculator With the Calculator, you can perform the addition, subtraction, multiplication, and division operations on your phone. z Press the number keys to enter figures. z Press z Press (CE) to clear data. z Press (Back) to exit the Calculator. z Press z Press cursor. Press z to enter operators. to enter a radix point.
19 Profiles You can set the profile and other sound-related or vibration-related features on the phone. The phone provide six profiles, including General, Silent, Vibrate, Outdoor, One Beep, and My Profile. You can press to set the profiles, or select Options > Edit to edit a preset profile. 20 Using the Airplane Mode In many countries, you are required by laws to switch off the phone when you are on an airplane. A way of switching off the phone is to set your phone to the airplane mode.
Changing the Phone Lock Code Do remember your phone lock code. If you forget it, contact your local dealer. 1. Select Menu > Settings > Security Settings > Change Phone Code. 2. Enter the correct phone lock code, and then press (OK). 3. Enter the new phone lock code, and then press (OK). 4. Enter the new phone lock code again, and then press (OK). PIN and PUK Consult the network operator if a SIM card is required.
Changing the PIN Code If your PIN is blocked, you can change your PIN by entering the correct PUK. 1. Enter the correct PUK code, and then press 2. Enter a new PIN, and then press 3. Enter the PIN again, and then press 17 (OK). (OK). (OK).
22 Menu Commands Contacts Search Allows you to find a contact from the phone book. Add New Allows you to add new contacts to the phone book. If you add a new contact to your phone, each contact may have three numbers. If you add a new contact to the SIM card, each contact only has one number. Your phone memory can save up to 500 contacts. Groups Allows you to view or rename a group, delete the members of a group, add members to a group and set the group ring. Allows you to set up to 10 groups.
Memory Status: Allows you to check total space and the remaining space for contacts in the phone. Messages Write Message Allows you to write and send a message. A message can contain up to 160 English letters. Inbox Allows the phone to store received messages. Allows you to view, reply, delete, and forward the messages stored in the inbox. Allows you to call and save the phone numbers of the message senders.
Templates Allows you to insert or edit the phrases. The phone includes 10 default templates. Settings Send Settings: Allows you to set the Auto Save, Priority, Delivery Report, Callback Number, Signature, Deferred Delivery and Validity Period. Auto Delete: If this function is activated, the phone automatically deletes the earliest messages to spare room for a new message when the message memory is full. If it is deactivated, the phone can not receive new messages when the memory is full.
Received Calls Dialled Calls Call Memo can be saved on the phone. Allows you to view, edit, save and delete call records, send messages, make calls to the corresponding numbers. Allows you to view the text memo recorded during a call or to create a new memo. Call Duration Allows you to view the duration of the latest call, the dialed calls, received calls and all calls, or clear the call counter. Profiles General Silent Vibrate Outdoor Allows you to set the profiles of the phone.
Alarms Allows you to set up to five alarm clocks. When the phone is powered on, an alerting tone is played at the preset time. Calendar Allows you to store up to 20 appointments on the phone. The phone reminds you at the specified time. Calculator Allows you to do some basic calculations. Stopwatch Allows you to measure time. World Clock Allows you to view the local time and the time of other major cities/areas around the world.
Phone Settings Language: Allows you to select the language, . including English and Auto Keyguard: After you enable the function, the keypad locks automatically if there is no operation on the phone after 15 Seconds, 30 Seconds, or 1 Minute. Auto Power On/Off: Allows you to set the auto power-on/power-off time. Power-saving mode: After you enable the function, the phone enters the power saving mode, and it can turn off the keypad backlight automatically between 9:00 to 17:00.
Call Settings Call Waiting: Allows you to enable the call waiting service. Consult your service provider for more information about this function. Call Forwarding: Includes options for requesting the network to forward all your incoming calls to another number or a voice mail connection. Answer Mode: Allows you to answer an incoming call by pressing send key or any key and .
PIN Code Request: Allows you to set the PIN, enable or disable the PIN. The PIN can protect your SIM card from unauthorized use. The default pin code is "0000". Change PIN Code: Allows you to change the default PIN code. Security Settings Phone Lock: Protects the phone from unauthorized use, if it is activated. z Immediate: Allows you to lock the phone immediately. z Power On: Allows the phone lock to be activated when the phone is powered on next time. z Off: Allows you to deactivate the phone lock.
Channel List Allows you to display the list of channels that are found. You phone can save a maximum of 20 channels. Start Record Allows you to record the currently played program. Delete Current Allows you to delete current channel. Auto Tuning: Allows your phone to search for all available channels automatically and save them. Manual Tuning: Allows you to search an available channel manually. Fine Tuning: Allows you to adjust the frequency Tuning and your phone of a channel.
Games Gulper:You must eat given food at stage by managing snake that increase its body little by little. Use Navigation keys or 2(up), 4(left), 6(right), 8(down) to move snake. While entering your name, use Key 5 to submit. SIM Tool Kit Features available on the SIM card can be accessed through this menu.
23 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security Observe local laws and regulations while using the device.
z z z z Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned. On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning. When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and results in increase in power consumption.
Battery and Charger z z z z z z z z z Unplug the charger from the electrical plug and the device when not in use. The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, replace the battery. Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger.
z z z z z z z Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where they can get damaged because of collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or explosion. Do not place magnetic storage media such as magnetic cards and floppy disks near the device. Radiation from the device may erase the information stored on them.
Certification Information (SAR) This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves.
