C2823 CDMA 1X Mobile Phone USER GUIDE
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO.
Table of Contents 1 Your Phone ..................................................................................... 1 2 Keys and Functions........................................................................ 2 3 Screen Icons.................................................................................... 4 4 Menu Tree ...................................................................................... 5 5 Installing the UIM Card and Battery ..........................................
1 Your Phone Strap hole Earpiece Screen OK Key Right Soft Key End/Power Key Left Soft Key Dial/Send Key Navigation Keys Number Key * Key Charger Interface # Key Microphone 1
2 Keys and Functions Press… To… z z View the dialled calls in the standby mode. Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the standby mode. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z z Display the Menu interface. Confirm a selection.
Press… To… z z – z z z z z z z Enter numbers and characters. Speed-dial phone numbers in the standby mode (by pressing and holding the 2-9 keys). Select a submenu item labeled the corresponding number. Enter the * symbol. Enable or disable the Meeting profile in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it).
3 Screen Icons Icon Description Network signal strength Icon Description Battery power level No network signal Calling CDMA 1X network Alarm clock on Domestic roaming General profile Overseas roaming Silence profile Memory for messages full Meeting profile Call privacy enabled Outdoor profile Message received My Profile Voice mail received Keypad locked Urgent message received 4 - -
4 Menu Tree Tools Messages 1 Recorder 2 Alarms 3 Scheduler 4 Calculator 5 Stopwatch 6 World Clock 7 Gallery 1 Create Message 2 Inbox 3 Outbox 4 Drafts 5 Voice Mail 6 Templates 7 Settings 8 Delete All Settings Call Log 1 Display Settings 2 Date & Time 3 Call Settings 4 Phone Settings 5 Security Settings 6 Resture Factory 1 All Calls 2 Missed Calls 3 Received Calls 4 Dialled Calls 5 Call Memo 6 Call Duration Settings Contacts Profiles 1 Search 2 Search By Location 3 Add New 4 Groups 5 Speed Dial 6 M
5 Installing the UIM Card and Battery Contact the network operator whether a UIM card is needed. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. 6 Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2. Connect the charger to an AC power socket. 3. During the charging, the charging icon is displaying in animation. 4.
7 Using the Function Menu 1. In the standby mode, press (Menu) to display the Menu interface. 2. Press 3. Press to scroll to a menu item. (Select) or to display the menu. 4. Display the submenu in either of the ways: z Press or z Press the number key corresponding to the number of a submenu to display it. to scroll to a submenu item and press to display the submenu. (Select) 5. Press (Back) to return to the previous menu or quit the function menu. Press to return to the standby mode.
z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. z In the standby mode, press calls. Select a record and press z Select a contact from the phonebook and press dial. z Select a message in the inbox and press to view the dialed to dial. to to dial. 9 Answering a Call When there is an incoming call, you can press to reject it.
11 PIN and PUK Contact the network operator whether a UIM card is needed. The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the blocked PIN. Both PIN and PUK are delivered with the UIM card. For details, consult your service provider. If you enter wrong PINs for a specified number of times consecutively, the phone asks you to enter the PUK code.
13 Changing the Text Input Modes The indicator of the current text input mode is displayed on the screen. In the editing mode, press to change the input mode. z In the editing mode, press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) to delete all the letters at a time. z In the "eZiEn" input mode, press to enter a space. In the "ABC" or "abc" input mode, press once to enter a space, twice to enter "0", and three times to move the cursor to the next line.
Entering English (ABC and abc) In the "ABC" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. If the letter you want to enter is on the same key as the previous one, you can enter the latter only after the cursor appears again or after you press to move the cursor to the next space. 16 Entering Numbers z z z In the "123" input mode, press a key labeled the desired number.
18 Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
z z z z z The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned. On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning.
may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger. Battery and Charger z z z z z z z z z Unplug the charger from the electrical plug and the device when not in use. The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, replace the battery. Use the AC power supply defined in the specifications of the charger.
Cleaning and Maintenance z z z z z z z z The device, battery, and charger are not water-resistant. Keep them dry. Protect the device, battery, and charger from water or vapor. Do not touch the device or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where they can get damaged because of collision.
Emergency Call You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications. Certification Information (SAR) This mobile device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the mobile device is designed not to exceed the limits for exposure to radio waves.
(1) This device may not cause harmful interference.And (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device.
