C2807
Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders.
Table of Contents Your Phone ............................................................................... 1 Keys and Functions .................................................................. 2 Screen Icons.............................................................................. 4 Menu Tree................................................................................. 5 Installing the UIM Card and Battery ........................................ 6 Removing the Battery and UIM Card ..............
Your Phone Earpiece Screen Navigation keys Left soft key Right soft key OK key Dial/Send key End/Power key Number keys Charger interface key key Microphone 1
Keys and Functions Press… To… z z View the dialled calls in the standby mode. Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the standby mode. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z z Access the UTK Confirm a selection.
Press… To… z z – z z z z z z z Enter numbers and characters. Speed-dial phone numbers in the standby mode (by pressing and holding the 1-9 keys). Select a submenu item labeled the corresponding number. Enter the * symbol. Enable or disable the Meeting profile in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it).
Screen Icons Icon Description Network signal strength Icon Description Battery power level Calling… General profile CDMA 1X network Meeting profile Roaming… Silent profile Alarm clock on Outdoor profile Message received Keypad locked Emergency/Urgent message received Voice message received Memory for messages full _ 4
Menu Tree Messages 1 Write Message 2 Inbox 3 Outbox 4 Draft 5 Voice Mail 6 Templates 7 Message Settings 8 Delete All Phone Book 1 Search 2 Add New 3 Groups 4 Speed Dial 5 Copy All 6 Delete All 7 My Phone No.
Installing the UIM Card and Battery Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. a b 2 1 3 Removing the Battery and UIM Card Make sure that your phone is powered off. 1 3 2 Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2. Connect the charger to an AC power socket. 3. During the charging, the charging icon is displaying in animation. 4.
Using the Function Menu 1. In the standby mode, press (Menu) to display the Menu interface. 2. Press 3. Press to scroll to a menu item. (Select) or to display the menu. 4. Display the submenu in either of the ways: z Press (Select) or z Press the number key corresponding to the number of a submenu to display it. to scroll to a submenu item and press to display the submenu. 5. Press (Back) to return to the previous menu or quit the function menu. Press to return to the standby mode.
Note z z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. In the standby mode, press to view the dialed calls. Select a record and press to dial. z Select a contact from the phonebook and press dial. z Select a message in the inbox and press to to dial. Answering a Call When there is an incoming call, you can press , (Answer) or to answer it, or press (Silence) to mute the tone, or press to reject the call.
blocked PIN. Both PIN and PUK are delivered with the UIM card. For details, consult your service provider. If you enter wrong PINs for a specified number of times consecutively, the phone asks you to enter the PUK code. If you enter wrong PUKs for a specified number of times consecutively, the UIM card is invalidated permanently. Contact your service provider for a new card. Locking the Keypad to lock the keypad.
Changing the Text Input Modes The indicator of the current text input mode is displayed on the to change the input mode. screen. In the editing mode, press Note z z z In the editing mode, press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) to delete all the letters at a time. In the "eZiEn" input mode, press to enter a space. In the "ABC", "Abc" or "abc" input mode, press once to enter a space, twice to enter "0", and three times to move the cursor to the next line.
Entering English (ABC, Abc and abc) In the "ABC", "Abc" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. If the letter you want to enter is on the same key as the previous one, you can enter the letter only after the cursor appears again or after you press Note to move the cursor to the next space.
Entering Symbols 1. In any input mode, press 2. Press to display a symbol list. to scroll to the desired symbol. 3. Press the number key to enter the symbol. Warnings and Precautions Electronic Device z Power off your phone near high-precision electronic devices. The phone may affect the performance of these devices. z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic control devices.
Area with Inflammables and Explosives In any area with inflammables and explosives, power off your phone and do not take out, install or charge the battery, to avoid explosion and fire.
z Observe the rules and regulations of airline companies. When boarding or approaching a aircraft, power off the phone and take out the battery. In areas where phone use is prohibited, power off the phone. Otherwise, the radio signal of the phone may disturb the aircraft control signals. Power off your phone before boarding an aircraft. Storage Environment Do not place magnetic storage media such as magnetic cards and floppy disks near the phone.
Children Safety z Put your phone, battery, and charger at places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. z Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous. z Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. Operating Environment The phone, battery, and charger are not water-resistant. Keep them dry.
z z z with more power. As a result, the talk time and standby time are shortened. The phone may interfere with nearby TV sets, radios and PCs. In accordance with international standards for radio frequency and radiation, use phone accessories approved by the manufacturer only. While using the mobile phone, observe the local laws and regulations, and respect others' privacy and legal rights.
z This HUAWEI device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. z : This symbol indicates that the equipment carry-ing this mark must NOT be thrown into general waste but should be collected separately and properly recy-cled under local regulations. Emergency Call You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed.
z z z z If there is battery deformation, color change or abnormal heating while you charge or store the battery, take it out immediately and stop using it. Otherwise, battery leakage, overheat, explosion, or fire may occur. When installing the battery, do not push the battery by force lest battery fluid leak out or the battery crack. Do not take out the battery when the phone is turned on. If you do not use the battery for a long time, store it in normal temperature after charging.
z z z Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur. When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused. Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur.
All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model.
encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help.
22
